Jump to content
SAU Community

Recommended Posts

Ok time to clear out some of the parts in my shed due to moving house.

KKK K27 turbo, 600-odd hp turbo, t3 flanged ext gated ~1.00 rear housing. 76mm 40T compressor and 76mm turbine. Needs new seals as the exhaust side is leaking oil. (approx $600 for full rebuild) good for a rotor or rb30, was alittle big for my rb20 spooled at 5K. still made 220rwkw on 10psi though.

$300

Set of RB20DET R32 injectors - Sold

Set of RB20DET Nics HR31 Injectors - $40

RB20/25 Exhaust manifold - $40

HR31 HICAS Lock bars, replaces your rams with rose jointed bars. - Sold

HKS F-Con V Pro Version 2.1 for RB25DET, was tuned to run an RB24DET with twin injectors, K27 turbo, big front mount, etc. made 220rwkw on 10psi. - $300

Repco thermo fans

16" - $60

14" - $50

12" - $40

HR31 Headlights (not projector type) - $60

:P

Karl

Edited by kwazza11
Link to comment
https://www.sau.com.au/forums/topic/121717-garage-clearout/
Share on other sites

hey will you send interstate to NSW the following items?

Repco thermo fans

16" - $60

HR31 Radiator - $30 (does this suit all r31 series RB20DET Motors ? )

what price will you do including postage ?

Cheers

Matt

Please send PM as i dont always look over for sale items

Link to comment
https://www.sau.com.au/forums/topic/121717-garage-clearout/#findComment-2248758
Share on other sites

this F-Con won't suit an RB20DET and Unless your mechanic is BD4's or Croydon's theres no point in asking as he wont be able to tune this ECU.

as for the O2 sensor, its as old as the motor which was a '91 rb20det. its in excellent condition.

PM me if your still interested.

Link to comment
https://www.sau.com.au/forums/topic/121717-garage-clearout/#findComment-2262994
Share on other sites

Selling it due to being in adelaide and i changed the turbo setup so needed a remap, the only option was to buy another ecu or get it transported to sydney for a tune (yea right)!

email BD4's and ask them if they can rewire it to suit, they may even sell a loom for it if your lucky, i've done exactly the same thing with a power fc (used an rb25det fc with an rb20 loom) but it requires a few wires swapped around.

Link to comment
https://www.sau.com.au/forums/topic/121717-garage-clearout/#findComment-2263360
Share on other sites

  • 2 weeks later...

Just some information, the F-CON just requires a new harness... BD4s will be able to supply one, and you are correct in saying it may or may not need some extra wires / less wires :thanks:

Link to comment
https://www.sau.com.au/forums/topic/121717-garage-clearout/#findComment-2282602
Share on other sites

interested in finding out more about the hicas lock bars?

Was under the impression lock bars don't work on the HR31 system but want to get rid of my Hicas, so if it works...pm me

PM sent.

FYI everyone else, heres a high res pic of them installed on my coupe. :rofl:

post-1089-1151219307.jpg

Link to comment
https://www.sau.com.au/forums/topic/121717-garage-clearout/#findComment-2283365
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is it a dog or synchro box? I guess either way, if it is new and crunching in one gear only, it has to come out and go back to the shop to check/measure as there is either an assembly or manufacturing issue
    • These are small points I should actually add to my original post. GKtech makes an extended slave line for this conversion. It's what I use, and it works well. You'll also need a CD009 slave cylinder.  S/R Chassis Z33/Z34 Conversion braided clutch line As for transmission sensors, you'll need to both extend the wiring and replace the connectors. I can't recall which is which, but one is your neutral switch and the other the reverse switch. As they are just switches, just test for continuity with your transmission in neutral or reverse to figure out which is which. Connectors:  VQ35 neutral Switch Connector | Wiring Specialties VQ35 Reverse Switch Connector | Wiring Specialties 
    • I’ll try and see it could be the release bearing. As for the 4th gear grind maybe clutch doesn’t disengage properly cause it is slightly like very slightly hard to go into first could be due to the slab cylinder pin being short uni clutch is a twin plate.   Ive attached some assembly photos hopefully you can open the link and see maybe detect what’s wrong https://share.icloud.com/photos/0dc2YvW__Hl6jl-l2_0jejjpg https://share.icloud.com/photos/09e0jkWOK-vP48c1cfY6u3ViA https://share.icloud.com/photos/0b4rDmh5R7pK7fb1VtND73a3g https://share.icloud.com/photos/05eeUi_6dC4DVi80jOUYDgb0g https://share.icloud.com/photos/06335TgY1XxyIJal_wkdQLhzw
    • Yeah for sure that is peddle adjustment 
    • What are your thoughts on this after having it for a while, worth getting?
×
×
  • Create New...