Jump to content
SAU Community

Recommended Posts

I dont see why there is a hold up. He doesnt 'own' anything and neither does anyone else!

Prank on here may be a better person to contact as the domain is regd by him. By wearing the stickers arnt we doing sau/cau a favour by promoting?

Why would they have a problem.....

ok thanks, I'll contact prank in regards to the stickers so sit tight everyone.

Whoops my bad... :yes::rofl:

Hang on not so much my bad.. I did ask if he was :P

Agreed lets get things moving

ok my bad, I just read it quick so I assumed fm was the cau rep.

  • Replies 78
  • Created
  • Last Reply

Top Posters In This Topic

sorry fellas, been away for a while. I don't own the cefiro's australia domain (PranK does) but this section's something that I've tried to nurture (and neglect from time to time when i'm too busy :)).

If you guys like the design then you should go with it, no need to pay royalties to us. As said before, as long as it helps the section and the site grow (there's still heaps of people in oz who don't know there's a community for cefs) then its all good. We're a small enough community that we don't need to regulate the merchandise like skylinesaustralia stuff.

midnight, feel free to do a run for the lads.

As for the design, I like it because its out of the usual square of thinking that gives logos of australia and modifying the badge that's already on the car (which i'm guilty of doin for a quick 2 minute job). Altho I do think that its a lil generic... i mean, that could be a holden commondoor from that silhouette. Dunno... that's just me, but I'd still buy a sticker :)

oh and also... I've just started playing with some fabric printing equipment that I got recently, so I might be able to do t-shirts very soon (once I figure out how to do a good job of it) at cost. First thing on the menu is some super fun happy sliders t shirts.

Below are what my prices will be. They are cheaper than any other commercial rates. If you dont beleive me ring a signwriter and ask how much stickers are.

The price includes a fee for my design work, and a fee for packing, my fuel and time getting to the post office.

cefiro silhouette sticker 250mm x 120mm

first sticker $8

extra stickers at $5 each...

so if ur ordering 2 stickers its 8 + 5 (+postage)

3 stickers is 8 + 5 + 5 (+postage)

etc

url stickers 70cm long

first sticker $12

extra stickers $8

Any order over $20 gets free postage.

If you are only buying silhouette stickers postage is an additional $2

If you are buying url stickers (with or without silhouette stickers) postage is an additional $3.50

I had to modify the sillhouette slightly as when i made the prototype there were a few problems, but the difference is minimal, just the c pillar and the edge of the tail light have been removed.

The ".COM" can be removed at no extra charge, or even "cefiros australia"

url stickers are 70cm long which I feel is a good size for passenger side windscreens.

ceffystickersks2.jpg

anyways bank details for those who want these are:

Bank: commonwealth

Acc Name: William Thompson

BSB: 062-251

ACC: 00628395

please use your username for description (make sure u do this otherwise I have no way of knowing whos who), and PM me once you have transferred the money, with the number and type of stickers you want and your address, will post once cleared

Edited by midnight
sorry fellas, been away for a while. I don't own the cefiro's australia domain (PranK does) but this section's something that I've tried to nurture (and neglect from time to time when i'm too busy :D).

If you guys like the design then you should go with it, no need to pay royalties to us. As said before, as long as it helps the section and the site grow (there's still heaps of people in oz who don't know there's a community for cefs) then its all good. We're a small enough community that we don't need to regulate the merchandise like skylinesaustralia stuff.

midnight, feel free to do a run for the lads.

As for the design, I like it because its out of the usual square of thinking that gives logos of australia and modifying the badge that's already on the car (which i'm guilty of doin for a quick 2 minute job). Altho I do think that its a lil generic... i mean, that could be a holden commondoor from that silhouette. Dunno... that's just me, but I'd still buy a sticker :D

oh and also... I've just started playing with some fabric printing equipment that I got recently, so I might be able to do t-shirts very soon (once I figure out how to do a good job of it) at cost. First thing on the menu is some super fun happy sliders t shirts.

Any luck on getting the cefirosaustralia.com domain forwarded on to this section funky? well for the time being untill a more permanent page is setup.....btw i've sent Prank a quick PM bout this also just incase he is the one to ask about it.

t-shirts. haha sweet! :P

Domain forwarding... nah I tried couldn't get it to work properly... i might have to corner PranK one day and sit down with him to make it work, coz atm I control the script based forwarding and he controls the domain forwarding.

Might just get prank to take it off domain forwarding and change it to a simple URL redirect.

I forsee stupid shirts being made like "Caution... Grandpa-mobile driver. Do not irritate."

Domain forwarding... nah I tried couldn't get it to work properly... i might have to corner PranK one day and sit down with him to make it work, coz atm I control the script based forwarding and he controls the domain forwarding.

Might just get prank to take it off domain forwarding and change it to a simple URL redirect.

I forsee stupid shirts being made like "Caution... Grandpa-mobile driver. Do not irritate."

lol !

I have purchased 2 sillhouettes. Look forward to receiving :)

Below are what my prices will be. They are cheaper than any other commercial rates. If you dont beleive me ring a signwriter and ask how much stickers are.

The price includes a fee for my design work, and a fee for packing, my fuel and time getting to the post office.

cefiro silhouette sticker 250mm x 120mm

first sticker $8

extra stickers at $5 each...

so if ur ordering 2 stickers its 8 + 5 (+postage)

3 stickers is 8 + 5 + 5 (+postage)

etc

url stickers 70cm long

first sticker $12

extra stickers $8

Any order over $20 gets free postage.

If you are only buying silhouette stickers postage is an additional $2

If you are buying url stickers (with or without silhouette stickers) postage is an additional $3.50

I had to modify the sillhouette slightly as when i made the prototype there were a few problems, but the difference is minimal, just the c pillar and the edge of the tail light have been removed.

The ".COM" can be removed at no extra charge, or even "cefiros australia"

url stickers are 70cm long which I feel is a good size for passenger side windscreens.

ceffystickersks2.jpg

anyways bank details for those who want these are:

Bank: commonwealth

Acc Name: William Thompson

BSB: 062-251

ACC: 00628395

please use your username for description (make sure u do this otherwise I have no way of knowing whos who), and PM me once you have transferred the money, with the number and type of stickers you want and your address, will post once cleared

F&*KING AWESOME ....... i will purchase a few this week!!!!

If anyone has problems with the stickers (ie damage or excessive creasing from posting) please contact me

I've alots drawn up a basic application guide for anyone who needs it.

you'll need a credit card or license wrapped in a clean cloth.

appguideve0.jpg

Edited by midnight
  • 2 weeks later...

Hey guys, so sorry its taken me so long to reply, I have been too busy to even scratch myself lately (I had to get funky to do it).

Ok, sticker, fine, all good, midnight, you have my blessing mate, I might even get you to do some SAU ones also, I'll send you a pm.

Also, the CAU url will be redirected prolly this arvo.

Again, so sorry guys, I have about 50 PM's to reply to from when I was away.. getting through them slowly.

C

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...