Jump to content
SAU Community

Recommended Posts

just curious about O2 sensors on a GTR, do i have to buy genuine nissan ones or i can get aftermarket ones? and what aftermarket ones can i get to make them work?

no u dont have to run geniune ones

i see you are in brizzy give brisco butler a ring there located in windsor they deal with all auto electrial

stuff and they will supply u a bolt in replacement ones

frank price varies a lot depending on where you go. As cliche as it is, a searcg would reveal a lot of threads about replacement O2 sensors for RB26s. It seems that the EL Falcon sensor is only good for RB25 or something like that - you most certainly can use an aftermarket one but you'd have to search to find a part number.

For what it's worth mate :yes:

i just replaced the sensors in my 32 GTR last week and got them from global efi, they are vl commodore items, u just need 2 replace the plug on the rear sensor with the orig 1. thats if the 33 is the same???

r32 and r33 have different oxygen sensors.

r32 is itanium and r33 is some other format.

front and rear sensors have different plugs in both models i believe.

r33 gts/gtst can use falcon el sensor, its just a generic 3 wire 02 sensor but its easier to ask for ford falcon el than R33 gtst at your local parts dealer.

nowadays its not such a big problem. NGK website has part #'s for BNR32 sensors with matching plugs

the gtrs have the same sensor, made of the same material

Having the same problem, hence why i started my own thread!!

Just to clear things up. Both R32 and R33 GTR's use a sensor made out of titania. Both use a three wire plug and both have a voltage range of 0 to 1 volts. This is why the Power FC is generic for both in regards to the O2 sensors. The ONLY difference is the thread size of the sensors.

R32 GTR: 12mm thread

R33 GTR: 18mm thread (spark plug thread)

Now, both use the same plug formats as well i believe, which differ from the front one and back one.

The factory serial numbers (genuine nissan) for these items are:

R32: Front - 22690-05U21 (Flat 3 wire plug)

Rear - 22690-05U22 (Square 4 pin plug)

Alternatives - front - NTK OTDF-P1P

rear - NTK OTDF-P1L1

R33: Front - 22690-24U02 ($209 from Metro Nissan Brisbane)

Rear - 22690-24U01 ($212 from Nissan)

So as you can see, buying genuine nissan is just being A$$ raped, hence why i am looking for alternatives.

Tony

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...