Jump to content
SAU Community

Recommended Posts

Here in the states, the innovate WBO2 is one of most popular A/F meters. I'd recommend the zietronix WBO2 box however, it's cheaper and unlike the innovate you don't need to buy an extra breakout box for RPM reading, outputs and inputs. It's much cheaper too.

I've used the zeitronix with the datalogit and it worked quiet well.

there is a thread by Sydneykid that has a wideband lamder sensor kit, and full system built that is cheaper than that from memory

http://www.skylinesaustralia.com/forums/in...opic=91356&st=0

Craved,

yer your right i read it as i think i have most post on this forum trying to get a handle on these cars. But this one is not far from Dubai so it is more cost effective to get it from the states than Oz.

And its ready to go so to speak and tried as i have i cant find any one here that knows a great deal about these cars.... all porche over here i am afraid

Edited by tacker

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Pac!   I will reach out to them!
    • Yes, but 2 things of the top of my head, 1. Legalities of nitrous on a street car. 2. No chop chop. I fully understand that there's much cheaper ways to make power, and whilst a wet 50 shot is fairly cheap to install, bottle fills are expensive, and bottles always need to be refilled, and nitrous also has its own inherent issues with reliability, and tuning, from my experience of others using nitrous, it doesn't take alot to lunch a engine real quick if something goes slightly wrong when spraying, if I wanted a big chunk of additional powers, a spooly boy would make alot more sense, disregarding the additional engineering, supporting mods and other logistical issues of sticking a spooly boy on a car that came naturally aspirated from factory  In the end I'm not racing for sheep stations, and I don't really care if people make more power, or are faster than me, or spend less, or more than me, the only thing the car needs to do is drive around and make me smile, which it is doing now Really, I just want a shiny new intake to look at when I'm cleaning the engine bay, and of course, some more induction doorts, and maybe even that 5kw for that elusive 200hp cherry on top that I might get If the FAB9 intake plenum, TB and air filter box thing doesn't eventuate for whatever reason, Plasmaman do one, not as fancy looking, and a fair chunk of more cash is required when including the TB and other bits and pieces that are required to install it, but, it is another option that is available to me if FAB9 one does fall down (but I really, really.....really, want the FAB9 one though) TL;DR. You want what you want
    • Been so long since I have been here,seeing SDU is dead. I had that problem on my gtr in 2006 but luckily there was no engine damage,it was inspected by Hytech Engines,race bearings and extended crank collar put in and that was about it. Hopefully yours is sorted now.
    • Would it not be cheaper to just spray nitrous?
×
×
  • Create New...