Jump to content
SAU Community

Recommended Posts

Hmmmm I took the car to the mechanic the other day to get my gearbox oil changed ...... and when I got it home I noticed what looks to be a rather nasty scratch in the passenger door :D:):D

I obviously cant prove he did it so I am asking is there any product that can help cover up my scratch?

The skyline is black and the scratch has come out white!!!! It looks really bad ... Its only about 1 and a half cm's long but its the principle of the matter .... I spend over a month finding my line with a body in really good condition and the very first time I take it somewhere they bash the door ... probably on the hoist...

I was thinking of getting a bit of paint mixed up to match and putting it on very carefully with a small brush...

Comments???? Ideas????

Please help....

MrGTST

Link to comment
https://www.sau.com.au/forums/topic/1231-scratches-in-paintwork/
Share on other sites

I know exactly where you are coming from, I spent 3 months trying to find one with a near perfect spray job (only to realise later that the car was in-fact re-sprayed!!! - No matter, its a good job). Anyhow, same thing, one mechanic put a long scratch into my right guard, but luckily it was only a scratch in the clear coat and not the paint, So I just gave it a good cut using a cutting compound, and then waxed it. Came up good, I can only notice it now if I look closely. Take a close look at yours, it might not go through the paint, so this might be an option.

If it does go through, a paint shop should be able to match your paint, and put it in a can for you to spray over, but I recomend you don't take this road unless you have sprayed a few cars before and know exacly what you are doing. I've sprayed a few cars in my time, and still cant get these touch up jobs 100% as it is near impossible! I've done a few where it appeared to look OK, but in certain angles of sunlight, the respray was visible...

If it is as small as you say, then a touch up texta, or a very fine brush will be your best bet, as you will cover the smallest amout of surface area with new paint, hence the chance of it being noticed is minimised.

Where abouts are you located? If you are in melbourne, I can recoment a paint shop that does a good job when it comes to matching the color of your car...

Zahos

Hmmmm thanks for that advice... I think that it has gone through the paint :D .... I will go get some paint mixed ( I am in Perth ) and be very carefull and see how we go ... luckily there a couple of out of the way spots that I can test first so I can see how it is going to go...

Mr GTST

MrGTST

A good panel shop can either buff the scratch out depending on severity or do a good job of touching it up then buffing it so u cant notice it.

I have 2 small scratches on my passenger dor which were there when i bought my car, I have someone lined up to remove them.

Hmmmm thanks for your opinions ..... I have gone and got some touch up paint .... I will give it a go tonight and see how it looks ( I will test it on some more discreet spots first though. )

I hope it comes out alright .... I was very proud of the cars conditions prior to this happening.

MrGTST

just remember to clean the brush well with thinners or turps after testing it, otherwise it will harden and make it difficult to do a good job on the door!

Also use a generous amount of paint on the brush, but only let it **VERY LIGHTLY** brush up against the panel...

If you get this technique right, you wont get the brush look, and it will come out looking much smoother and less noticeable.

Clean the area of application VERY WELL, and air dry it with a compressor or a hair dryer before application. After the paint has dried for about 24 hours, give it a good buff, so it may blend in a little more. (This rarely makes a difference, but possibly can).

Cant think of any more hints....

Zahos

Hiya Again.....

Well let us just say that the touch up paint didnt work.... It came out pretty bad so I very carefully scratched it off....

So I am back where I started .... I need a professional job.

I will take it to my local Panel Beater ( I have used him once for my last car ) to get a quote but Adam 32 I am interested in finding out more from your friend???

I am a perfectionist and want to make sure a good job is done ( nothing is too good for my baby :uh-huh: ) and dont want to just randomly pick something out of the yellow pages :(

Therefore as I said Adam 32 can ya help me out!!!! :D

Thanks

MrGTST

mr gtst

take it down to the local panel beaters or wherever you were going to take it

ask them if they would either repsray the entire panel (if the scratch is bad) or whther they could buff it out with the electric buffer

if they saf theyd just buff it out then let me know and we can do it on the weekend

if they say respray then the scratch is probably too deep to buff out and will need to be painted. if this is the case my mate will still do it for you but will cost almost the same as anywhere else as they have to mix-up the minimum amount of paint of that particular paintcode do no matter how little paint you need the minimum is like 2L or something so theywill charge you for it.

either way let me know and good luck!!

Hmmmm I went to the panel shop ....

The guy looked at it and said it would need to be resprayed....

The quote ..... $400 ....

The want to basically rub the whole door back and respray the whole thing.

Hmmm $400 is a bit excessive for about a 1cm scratch.

Maybe I will just have to live with it :(

Out of curiosity what would happen if you tried to buff it out but the scratch is too deep???? Would it make it look better/worse???

Is it worth trying.

MrGTST

Hmmm but I havent really done much apart from try touch up paint, which didnt look good at all...

The only other thing I have done is tried polish but that was just with an old t-shirt :(

I am hoping a proper buffing job could make it look better.... obviously it wont be perfect but if I could just get it to be less noticeable that would be good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Haha actually I did join back then under a different email address,  I couldn't re-activate my account so made a new one! I didn't post much anyway so not missing out on much. Amazing to see how the value of the cars and parts has changed over the years, also ACT section appears to be dead now. 
    • Thanks... It's in pretty good condition overall, probably due to not being drifted/tuned however being a daily driver has taken its toll. Had 100k on the clock when I got it, up to 180k now. Unfortunately it's not 100% dent free, it's got a small dent on FLH side and broken indicator from where I hit a small kangaroo at high speed. If you look at closely at pic #5 you might spot the dodgy trailer light repair my old man and I rigged up as temporary repair! - It's still there due to a combo of needing the car as daily driver and then too lazy/busy to fix properly. I've a couple of other minor accidents accidents as well but nothing major. One required a new front bar and unfortunately the smash repairer ordered the normal gtst one and not the aero bar. Needed the car back asap so just went with it, regretted ever since.
    • I can't believe that anyone is foolish enough to believe that the base maps are for any other purpose than to drive the car up onto the trailer/truck or gently creep it to the dyno. No matter how good they are, they can never be any better than the factory maps**, and only the foolish trust those on a significantly modified setup. **Yeah, yeah. I know there's also the difference between factory maps being fixed to certain injector sizes and MAP/AFM/VE relationships, and the likely aftermarket ECU base maps being better able to handle the sorts of changes that would render a stock ECU dangerous, like different sized injectors. But let's just ignore that for the moment, because the principle is still the same.  
    • I'm shocked, you've owned a Skyline since 2006 and never joined SAU before now! 😮   Welcome, it's much quieter these days than it was in 2006, but lots of very knowledgeable ones lurk around here. I actually think in outage we've forgotten more about Skylines than anyone knows about them today... 😛
    • So it could give us some info. Such as we find out what number they started at, and we know how many of those blocks came before it.
×
×
  • Create New...