Jump to content
SAU Community

Log Books/race Registration

phunky_monkey
 Share

Recommended Posts

phunky_monkey Grand Master

phunky_monkey

Posted
Posted

Hey all,

Just curious as to what is needed to obtain a log book from CAMS. I ask this because I would like to have my car log booked for two reasons:

1. To clock up enough hours and have my log book stamped so that I can apply for a C3 licence at some stage in order to import a race only car

and

2. To get race rego on the car.

Now, this second point I'm not 100% clear on, but have been told that once a car has clocked up a certain number of 'track hours' that the car can be transferred to a 'race' registration enabling it to be driven to and from the track/workshop, and for testing purposes without having to apply to CAMS for a permit each time.

Have I got this right, or am I way off...

Thanks

Dane

Link to comment
https://www.sau.com.au/forums/topic/123150-log-booksrace-registration/
Share on other sites
Duncan Grand Master

Duncan

Posted
Posted

re #2, you cannot get rego on a car imported as a "race" car. No matter how many races it has done.

You can get rego on a car imported as a "rally" car which is identical process through DOTARS except that you need a NR CAMS license instead of NC. Once you have NR you can get NC by doing an online lecture and paying the upgrade fee about $150. All the details for getting NC and NR are on the cams website, but basically once you have PC (formerly C3) you need to do 6 races in a 12 month period and be observered at those events.

In NSW once you have either a complied or a rally import car, you can apply for rally rego. You need a L2S or higher license only for rego, a log booked car with either full compliance or rally import approval, a safety inspection by a CAMS approved rally scruitineer and a heap of patience when you get to the RTA :)

In NSW if you have rally rego you can:

Drive and in to CAMS events

Drive to and from Practice

Drive to and from Workshops.

As long as you obtain a permit every day you want to use the car.

My GTR race car has rally rego and it is brilliant, saves trailering the car everywhere, didn't have to pay for SEVS compliance and I can use it for everything I ever need to :spank:

88silhouette Grand Master

88silhouette

Posted
Posted

i am going down this path also

called cams h.q. and then got put through to cams nsw

first step before anything re log book - roll cage!!!

cams bloke basically said dont call back until you have cage installed in your car

yeehaww

Duncan Grand Master

Duncan

Posted
Posted

Hey Mark I was checking out roll cage rules with CAMS the other day too.

ANyone can make an approved cage as long as they follow:

One of the homologated designs from the CAMS book (I am using 253-17) basic 6 point cage with diagonal between top of middle hoop and bottom of side hoop.

CDS, CDW or CEW grade mild steel

Main hoop 44.45 diameter (2.5mm wall) or 50mm (2.0mm wall)

All other components 38mm diameter (2.5mm wall) or 40mm (2.0mm wall)

cold bent tubing

"highest possible quality welding with full penetration".

Once the cage is done CAMS send out the cage declaration form for the builder to sign, then it gets a ROPS registration number.

88silhouette Grand Master

88silhouette

Posted
Posted
Hey Mark I was checking out roll cage rules with CAMS the other day too.

ANyone can make an approved cage as long as they follow:

One of the homologated designs from the CAMS book (I am using 253-17) basic 6 point cage with diagonal between top of middle hoop and bottom of side hoop.

CDS, CDW or CEW grade mild steel

Main hoop 44.45 diameter (2.5mm wall) or 50mm (2.0mm wall)

All other components 38mm diameter (2.5mm wall) or 40mm (2.0mm wall)

cold bent tubing

"highest possible quality welding with full penetration".

Once the cage is done CAMS send out the cage declaration form for the builder to sign, then it gets a ROPS registration number.

duncan any chance you can get me a copy/scan of that part of the book? or is is in that pdf on the cams website?

phunky_monkey Grand Master

phunky_monkey

Posted
  • Author
Posted
re #2, you cannot get rego on a car imported as a "race" car. No matter how many races it has done.

You can get rego on a car imported as a "rally" car which is identical process through DOTARS except that you need a NR CAMS license instead of NC. Once you have NR you can get NC by doing an online lecture and paying the upgrade fee about $150. All the details for getting NC and NR are on the cams website, but basically once you have PC (formerly C3) you need to do 6 races in a 12 month period and be observered at those events.

In NSW once you have either a complied or a rally import car, you can apply for rally rego. You need a L2S or higher license only for rego, a log booked car with either full compliance or rally import approval, a safety inspection by a CAMS approved rally scruitineer and a heap of patience when you get to the RTA :dry:

In NSW if you have rally rego you can:

Drive and in to CAMS events

Drive to and from Practice

Drive to and from Workshops.

As long as you obtain a permit every day you want to use the car.

My GTR race car has rally rego and it is brilliant, saves trailering the car everywhere, didn't have to pay for SEVS compliance and I can use it for everything I ever need to :D

Thanks for that Duncan :banana:

My car has full road rego at the moment, so transferring to rally reg shouldn't be an issue.

What is involved in obtaining a permit each time? Is it a pain, or is it an easy ph. call etc? Is there a limit to how many permits you obtain? I'd be looking at probably on average 6 days a month.

Duncan Grand Master

Duncan

Posted
Posted

Mark...yes and no >_< got a fax number?

phunkey, in NSW it is a call to an automated service. I'm not aware of any limit at one stage I was getting 5-6 a week and never got questioned!

You need to make suer all the rules in Vic are the same they are probably similar. Call the CAMS Vic office and ask about rally rego.

r171 Newbie

r171

Posted
Posted (edited)

Pretty sure that for Victorian RP cars you don't need to call up each time, as the Rally Permit is itself a 12-month UVP. You will need a R3 license or above, and not L2S+ like NSW..

With RP plates you can use the car:

- During CAMS-approved rallies, including SS and transport stages

- Travelling to and from a rally, and its scrutineering

- To and from Workshops

In addition to this, you can also use the car in testing for an approved rally, but you must apply to CAMS for a letter which states that testing is permitted.

But yep, the process for applying for a Vic rally permit this will be the same as NSW.. in that u will need a cage with ROPS registration number, as well as the car logbooked and scrutineered by a CAMS official before it can be registered.

Edited by r171
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Stock rb25det neo questions

      By MBS206 · Posted

      Everyone is too used to learning from places like HPA "how to tune" and what to expect at what point, rather than being able to see "The computer says I'm in cell with Row = 8, column =4, and I can see my fuel is lean, so lets add more" Everyone wants "real units", which helps for someone picking it up for the first time and seeing how bad the tune is if they're not used to touching it.   However, I think for most of us who want to play with it, you're 100% right, we're only needing to learn about it for OUR CAR. Which makes it great, and we don't need to care what the real values are, we just need to know which cell it is, that's causing the lean or rich point, or that we want more ignition timing or less. But again, everyone wants everything super you beaut and nearly self tuning, with VE maps, and a billion compensations...   Though then there's me over here when I'm doing reverse engineering work just reading data in hex format that most people couldn't work anything out from. Yet I can see what's going on.
    • blind_elk
      [VIC] RB20DET Block

      By blind_elk · Posted

      Gone.
    • EC04
      R34 Skyline Knee Pads

      By EC04 · Posted

      €1.300    €
    • EC04
      R34 Skyline Knee Pads

      By EC04 · Posted

    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      Um. No. Since Matt introduced the TIM it has become a lot easier to deal with the consequences of changing K for AFM and injector swaps. Then, tuning is a f**king doddle. No-one needs to know or care how many grams of air are flowing or any other bullshit. Need more fuel in a cell? Add more fuel. Need more timing in a cell. Add more timing. Need to adjust any of the other tables for warm up and so on? No harder than anything else. Sure - it's not an ECU system for starting from scratch on an arbitrary engine. But then.....it was never supposed to be, not recommended for, and almost never used that way. So.... On your engine, in particular, Nistune/Nissan OEM is about as sophisticated and difficult as banging 2 rocks together. Those ECUs are primitive and simple. There is nothing difficult there. I learnt Nistune from scratch, created new maps with extended axes, interpolated/extrapolated the original maps onto them and tuned my RB20 (basically the same ECU as your 26 ECU) all by myself, more than 20 years ago. And that was long before even TIM.
×
×
  • Create New...