Jump to content
SAU Community

Recommended Posts

Do you realise they are smaller turbos, so you will make less power. Also they do not bolt up to the exhaust manifold, nor do they bolt up to the dump pipe, nor will the water and oil lines bolt up.

Next we have the bearing issue. The std turbo is ball bearing, the GTR turbo is plain bearing. I dont even think its has a360deg thrust bearing, i think its only 270deg.

So i would perhaps think twice about what you are about to do. It would be a costly installation, and will give poor performance.

I don't mean to be rude Roy but I can't see anywhere that he said an RB26 turbo. I assumed an RB25 turbo - isn't that what a lot of GTSt guys fit? R33 series 2 is the primo one?

LOL...well i find your tone very rude :)

Im hoping its been edited, otherwise its back to kindergarden and learning how to read ;)

Oops, back in my hole then

Lol, nah its a forgivable mistake roy.

Really any performance workshop can do the work for u...its really not that hard...basically its a drop in drop out thing but can depend on what year ur car is... If its one of the older RB20's then sometimes the oil and water lines are different...If its a newer one then im pretty sure its striaght drop in. Hardest part is taking everything off to get to the turbo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's kind of interesting - They definitely do builds that split the difference between what they like and what will generate views and engagement. The NC Platform always surprises everyone in a good way, in an uncomfortably good way some may say. They could throw a LS in there and arguably have the best (and best performing) car of the entire stable. But that isn't necessarily what draws views, because people viewing don't want to accept the vegetables of a LS NC MX5 being a superior vehicle in every way (including fun) than a RB26 240Z. This is also why there's not a lot of content about the GR Yaris (on the web in general). They're too good, yet 'only a Yaris' The community doesn't want certain cars to be as good as they are - to beat their hero cars, and I believe the NC MX5 is absolutely one of those cars.
    • Yeah - My key still does the chime thing. I followed the procedure but it didn't activate on the (identical) third set of keyfob that I had. I vaguely remember the alarm saying you can only pair two keys with it. Now that I've dug it up, it appears that you very much can pair keyfobs to the alarm system. (which are the fobs I use to unlock the car). I have successfully diverted the thread and can probably not use the OEM keyfob ever again unless I use the aftermarket alarm and attempt to pair the OEM keyfob to it. Which might just work, or not :D. I definitely used the nissan method and not the aftermarket alarm method.
    • What makes it worse is that Nissan made keys in the same style, for example R34 and Stagea, but they work at different frequencies or something like that. So they look the same but the remotes are not interchangeable. I learned that from some guy selling aftermarket blank keys.
    • Does your door chime work when you have the key in the lock and open the door? I've had that disabled because it's f**king annoying and it is one thing that messes with the pairing. Because now the car doesn't detect key in ignition anymore and the slide-key-in-and-out sequence does not trigger the pairing mode anymore. The service manual has a section on the various bits involved in doing the syncing. I presume it'll be similar between Stagea and R34.
    • Agree, but meh, I think is is based more on LOLS than actually apples to apples, like, who would have thunk a turbo 4 cylinder would not beat a NA 4 cylinder  I think with just basic N/A mods, like a exhaust and tune, it would be equal to the Mini in its current form, maybe I know my current 2.5 would "chop the mini" as the midrange now has a night and day difference in power delivery compared to the tuned 2.0, by around 20kwatw and 30nm from around 2k rpm "ish"....... I'm kinda hoping that they do a N/A build, either with the MZR 2.0 or with whatever they decide to use If I recall correctly they did talk about K swapping one a while ago
×
×
  • Create New...