Batmbl Gb: Twin/split Dump & Front Pipes In One

[(B1) MR_fanny]

i was still able to use my existing gasket.

heres my thread talking about my dump+cat. its a must buy in my opinion.

http://www.skylinesaustralia.com/forums/in...howtopic=128943

[RyanN]

Installed the pipe on weekend, took about 4hrs, mostly just spraying the rusted bolts with rp7 and waiting around for it to work its magic. A couple of questions though, did anyone else notice that if you give it some it seems to over boost? on the drive to work this morning i put the foot down about half way to work (gives it about a 10min warm up) then a soon as the auto kicked back the turbo spool was a hell of alot louder than before and boost shot up to just below the 1+ line (didn't hear anything rattle down the exhaust pipe though, thank god), normal? should i be concerned?

[shif_tea]

Installed the pipe on weekend, took about 4hrs, mostly just spraying the rusted bolts with rp7 and waiting around for it to work its magic. A couple of questions though, did anyone else notice that if you give it some it seems to over boost? on the drive to work this morning i put the foot down about half way to work (gives it about a 10min warm up) then a soon as the auto kicked back the turbo spool was a hell of alot louder than before and boost shot up to just below the 1+ line (didn't hear anything rattle down the exhaust pipe though, thank god), normal? should i be concerned?

i've heard that you'll get an extra few psi of boost because of the lack of restriction in the exhaust. I wouldn't worry about it, whats it set to normally? Or is it stock boost?

[RyanN]

yeah stock boost; still using the stock cat and system after the dump, the power gain seem to be noticable as well, turbos alot noiser now though.

[siddr20]

I suggest you get a boost guage now. Just to monitor and be safe.

Yup i noticed the difference immediately. Spools up much quicker, sounds better, more inductions noise, more kick, better sounding car.. what more do you want..

Hmm howd u use your existin gasket?? wouldnt it be to small?

[RyanN]

I suggest you get a boost guage now. Just to monitor and be safe.

Yup i noticed the difference immediately. Spools up much quicker, sounds better, more inductions noise, more kick, better sounding car.. what more do you want..

Hmm howd u use your existin gasket?? wouldnt it be to small?

no probs with using the existing gasket, what do you mean by too small?

[siddr20]

ohh sorry meant at the end of pipe connecting to hi-flow cat..

I had to use a new gasket for that.. but all good!!

[RyanN]

ohh sorry meant at the end of pipe connecting to hi-flow cat..

I had to use a new gasket for that.. but all good!!

yea i just used the orginal gasket, still was in good nick; getting the rest of system done soon so its going to be replaced anyway.

[nzm033]

installed mine

took about 4 hours.....pretty much bolt on...some very minor adjustments to mine

turbo spools early...goes harder throughout the whole rev range and very responsive compared to stock

great product