Jump to content
SAU Community

Recommended Posts

Hi All,

I have finally reached the end of the long importing process and thought I would post up a summary of how everything went for two reasons:-

  1. I’ve seen a lot of others ready to bring in an R34 and they are welcome to use the same companies I did as I would recommend them highly!
  2. A shameless plug for the companies that helped me so much throughout the whole process.

I won’t get into the details about importing as all the details about the importing process including costs, procedure etc. can be found on this forum. However please remember to not take everything you read to heart as at the end of the day it varies greatly based on what you want. I am happy to answer any questions you have if you are about to import an R34 yourself.

Firstly, finding your car and getting it to Australia. I chose to go with Mark Hocking from My Trading and I would have to say that everything you hear about this man is without a doubt true! He is, in my opinion, the best person out there when it comes to finding exactly the car you are looking for. Mark made the whole process so easy and clear and would not settle for any vehicle other than the best. There were points when I was getting impatient and was willing to settle for second best but he made sure we kept looking and found the car that I was looking for.

Mark is very happy to talk and provides you with his mobile number so you can reach him whenever you need to. In all the time I was searching the auctions and calling him to get cars inspected he was always patient and helpful and kept things on track. I cannot express how important this part of the importing process is as if you don’t get the car you want, it doesn’t matter how well the rest of the process goes you will not be happy. You need to make sure that the person buying your car from the auctions knows exactly what you want, hence the reason why working with Mark is so good as he is the one you talk to and he is the one that buys your car from the auctions (after inspecting the vehicle personally).

My one bit of advice here is, get involved in the process. Call your import borker or exporter A LOT! The more you keep in contact the more they will think of you when vehicles come up for auction. Sure it may cost you a lot in phone calls but it can make the difference between getting an alright car and a fantastic car. Search the forums for Mark’s name and you will not find one bad word about him. That was the reason why I chose to import my R34 through him.

After the car gets to Australia you will need someone here to handle the wharf paperwork and get it to the compliance workshop. Although you can do all this paperwork yourself, I would recommend strongly against it. Simply because it isn’t really that much of a cost when compared to the price of an R34 and it will ensure that your car leaves the wharves as soon as possible. Customs brokers have been doing this for a living for ages and they know exactly where things can go wrong and get on top of any issues that arise.

I chose Sunstate Customs & Cargo as my customs broker and I couldn’t be happier with the service. Adam at Sunstate was very helpful and informed me of everything I needed to provide along the way as well as doing everything on time to make sure I got the car quickly without incurring any storage. Once again I recommend getting involved and getting on the phone to the customs broker as often as you can. Basically I found that if I was very polite but persistent they were always happy to help me out and update me on the status. I have to emphasise however, be polite, it is hard as you may get anxious and frustrated as delays occur but anger isn’t going to resolve anything. Just keep updated and do everything you can to make sure you never hold up the process.

Once you have cleared the wharves you need to get your car complied. There is a lot of talk about what you can and can’t have on your car with regard to compliance and how you can keep your Xenons etc. Those issues are a discussion for another topic so I won’t go into them here, but all I can say is search the forums. Whenever I wanted an answer I found it in the forums.

I have said it many times but I will say it again, please remember to get on the phone and get involved in the process. This will make sure that you will find out about any issues quickly and get them resolved before they cause major problems. I followed this rule and I have come out of the process very happy with an impression that the importing process is smooth and trouble free if you keep on top of it.

Apologies for the freaking long post, but I have come out of the whole process so happy that I had to give credit to all those who helped me out along the way. Once again, many thanks to Mark Hocking (the most important person in the whole process). Adam Kemp from Sunstate Customs & Cargo (who kept everything under control at the wharves). Last but not least, all the great people at Shogun Car Company (who performed mechanical surgery on my R34, fantastic job!!).

I may have missed parts of information and I know I haven’t answered everything but please feel free to contact me if you have any questions.

Cheers,

Ozan.

P.S. If you got this far, thanks for reading the whole post >_<

Edited by OzanMakinaci
Link to comment
https://www.sau.com.au/forums/topic/123471-importing-an-r34-my-experience/
Share on other sites

I used Prestige for my R34 and couldn't be happier with their service. Geoff will get more business from me personally and my recommendation in the future - Immediate friends have totalled over 10 vehicles collectively and not a bad word could be said about Prestige.

Ozan's picked up a VERY nice '34, post some pics mate!

haha, yeah give me time. Gotta get a digital camera first, I work in IT and I have none of the gadgets... how lame of me.

Fretwekk:

My Trading is just an exporter in Japan, whereas Prestige is an import broker in Australia. You pay an bit extra for an import broker but they will take care of all the organisation for you so you only have one company to deal with.

If you use an exporter from Japan you will need to organise customs clearance (yourself or through a customs broker) and compliance as well, but you save the import broker fee.

It's all about which ever suits you better. Geoff at Prestige has been doing this for many, many years and I have heard great things about him. Mark has great rep also, so it's up to your preferences.

Cheers,

Ozan.

What's the difference between using a service like mytrading to say prestige imports?

prestige is in australia, while mark hocking is in japan.

prestige is for noobs who want to spend more and mark hocking is for the little more clued-in to spend less.

I have imported both ways, through an australian broker like prestige and also through a japanese exporter like mark hocking.

The only reason I used the broker was because friends told me that was how you import a vehicle, after doing it that way first I realised it was the stupid noob more epensive way to import a vehicle.

well done the orignal poster for importing the right way :thumbsup:

Edited by noise

Noise: You're certainly generalising a lot there. Having had some involvement in importing at least 8 vehicles from Japan there is no evidence suggesting that Prestige are more expensive than J-Spec, Meisei or Mark H or anyone else. I'm not putting anything against any of them, each have (at worst) a reasonably reputation.

Prestige offer a complete service which requires little real effort, if you've done your homework and know what to look for there's no reason you can't pick up a bargain (say a sub-20K R34 GTT, auction grade 4.0)

Noise - you're saying Prestige charges too much?? You obviously don't remember the days when we used to pay $40,000 for a twin turbo Soarer or $50,000 for a Eunos Cosmo. If it weren't for brokers like Geoff, you'd all still be paying those prices.

There are many people happy to pay Prestige to do the legwork - there are others who prefer to save a few dollars and do it themselves. There is no right and wrong about it.

prestige is in australia, while mark hocking is in japan.

prestige is for noobs who want to spend more and mark hocking is for the little more clued-in to spend less.

I have imported both ways, through an australian broker like prestige and also through a japanese exporter like mark hocking.

The only reason I used the broker was because friends told me that was how you import a vehicle, after doing it that way first I realised it was the stupid noob more epensive way to import a vehicle.

well done the orignal poster for importing the right way :(

Tre your comments about Prestige are starting to tire me. Why must you jump into every thread where Prestige is named? Fair enough you may have had a bad experience with Geoff but there is no need to force your opinion on everyone each time his business is mentioned.

Each method has it's own merits, and what may be good for someone may not be for another. Please keep that in mind.

Just in case you didn't understand, let me point you to the Board Rules. Read them again and keep them in mind prior to posting. You've had previous warningsa lready.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I had absolutely no symptoms whatsoever that anything was wrong.... I'm very happy it was all spotto'd and re-bled and re-torqued and aligned though. Will be picking it up tomorrow and undoubtedly be like "Oh, that clunk is gone" "Oh, the car really wants to drive straight" "Oh, that pedal feels better" "Oh, it feels like I've gained 25hp" "Oh, the handbrake works now" It should have been a sign that the new Project Mu shoes had 3mm of pad depth on them out of the box, and the OEM ones from 25 years ago that we took out also had 3mm of pad depth, implying the issue was not, and never was the shoes, but we put that down to it not being adjusted correctly. It wasn't, but it wasn't even adjustable at all given one side was boned and the T Junction of the cables was on a 45 degree angle, the non-working side being the one on the massive angle. Obviously when I had adjusted it and reset it and re-tensioned it I had either got it stuck or something along those lines. Oh well. Live and learn and absolutely could have been catastrophically worse so I'm rationalizing it as a win, kinda. I also got the chance to measure the distance between rear rim and the suspension arm/shocks and found a 30mm rubber block only just doesn't fit there. Which is great to know before ordering wheels, when I assumed 30mm was easy. The man with the Porsche adapters has rims that use 23.9mm of that space, so it's safe to assume I have between 23.9 and 29.9mm of space there to play with on the inside. The wheels looked pretty stupidly pokey with the 20mm spacers on the rear, only for me to find that the studs come out another 12mm and the wheel doesn't actually sit flush with the hub because you're supposed to cut your original studs. The wheels do have cutouts that kinda accomodate it, but not fully. So my 20mm spacer was anywhere between 25mm and 35mm. ~25mm and send it will determine on where the wheels sit with the spacers on. When I put the pads in for the track day I will mess around with spacers (with wheels that do not clear studs properly when mounted to spacers) and do more math, for the last time, for the 7th time.
    • Lucky pick up Best to find these things before something horrible happened to the yoke flange thingies I would hate to think what would happen if it dropped the tailshaft  Hopefully the holes are not flogged out in the yokes and it was just the bolts that got munted  As for the hand brake.....ouch, look like the disc got rather hot, and I assume smokey, I recall when I had a front caliper seize on the Commodore, there was lots of smoke and the disc was glowing cherry red when I was able to eventually stop and have a look, and stopping a big heavy car, going down a big hill with some rather high RPM down shifts and some hand brake action is something that makes you think hard about life
    • One of the things that never seemed right was the handbrake. Put in some nice new Project Mu shoes. We figured the rears were out, so why not. We're right there. My handbrake never worked well anyway. Well, this is them, 15km later. 67fdcf94-9763-4522-97a4-8f04b2ad0826.mp4 Keen eyes would note the difference in this picture too:   And this picture: Also, this was my Tailshaft bolts: 4ad3c7dd-51d0-4577-8e72-ba8bc82f6e87.mp4 It turns out my suspicions that one side of the handbrake cable was stretched all along were pretty accurate, as was my intuition that I didn't want to drop the tailshaft to swap them on jack stands and wasn't entirely sure about bolt torque. I have since bought the handbrake cables which have gone in. I'm very glad that I went to my mechanic friend who owns an alignment machine to get an alignment before the track day, because his eyes spotted these various levels of "WHAT THE f**k IS GOING ON HERE?". Turns out the alignment wasn't that bad, considering we changed the adjustable castor arms out for un-adjustable castor arms, and messed with the heights. Car drove pretty good with one side of the handbrake stuck on, unbleedable rear brakes, alignment screwy, and the tailshaft about to go flying and generally being a death trap waiting to happen! (I did have covid) (I maintain I adjusted the handbrake correctly, but movement caused shennanigans and/or I dislodged the spring on the problem side somewhat, or god knows what). G R E G G E D
    • Very interesting, im not sure how all those complications fit in to running a haltech instead of a stock ecu but I'm starting to think I'm a bit out of my league.
    • I just put 2 and 2 together. This is a Neo converted R32. The Neo ECU (in concert with the R34's AC controller) runs the AC quite differently to how the R32 ECU and AC controller do it. If you just drop it all in, it won't work. There is some tricky wiring required, including changing to the pressure switch that the Neo controllers want to see. I don't know what it is, because mine was done by a guru. It was a year or so after I did that transplant before he worked out what needed to be done.
×
×
  • Create New...