Jump to content
SAU Community

Recommended Posts

Just found what id like to think is a bargain. Its an r32 gtst, manual with an RB25DET standard. It only jumped off the boat a couple of days ago and after taking it for a drive in "off the boat condition" it drove and sounded quite good. It has just over 100 000km and had the timing belt replaced. Also many scratches and a couple of dents that are promised to be fixed up. I wont tell you the price offered but its similar to what it costs if you import a normal r32 gtst through prestige.

Is there anything i should look out for as at that price their is a good chance something is wrong with it. Its in Melb and is being sold through a compliancer/importer. Any info would be great! including what the rb25 spec has over the rb20 (diff suspension etc...) Thanks

Link to comment
https://www.sau.com.au/forums/topic/1237-r32-with-rb25/
Share on other sites

Dude..

One thing that I am quite sure of is that the R32 GTST NEVER came out standard with a RB25DET.

The very late ones did come with an RB25DE but never the non turbo.

So it is not a standard car in that sense.

As for what the RB25DET has over the RB20DET...

RB20DET

157KW

263NM (I think..)

RB25DET

187KW

297NM (I think..)

Link to comment
https://www.sau.com.au/forums/topic/1237-r32-with-rb25/#findComment-24950
Share on other sites

Nah it isnt j-spec. But whats the lowdown with them, are they ok? Havent checked them out yet but im assuming there the sort of place that sell run of the mill stuff for top dollar.

I had never heard of a rb25 32 either until this one.(whether it really is std dunno, just what salesmen told me) Also must ask about RUST! had a few tiny littler spots under the hood, top of the struts, under the skirts too and also was told a bit of water came out of the boot when i cornered. Didnt open the boot but guessing its just rain water. How much should rust affect the decision of buying this sorta car?

Link to comment
https://www.sau.com.au/forums/topic/1237-r32-with-rb25/#findComment-24987
Share on other sites

rust should tell you to keep away from the car a small amout is ok but water from the boot indicate rear end accident the one way to check if its a factory 25 det which I doubt is to check the compliace plate on the firewall it will have the engine there generally they are rb20de or det or rb25 de.

make sure its not too rough. you can get good r32's for 12-14k.

also make sure they will register the car for you as its not the factory motor could cause hassles.

meggala

Link to comment
https://www.sau.com.au/forums/topic/1237-r32-with-rb25/#findComment-24989
Share on other sites

they did make them with rb25det about 2000 at the very end, part of trailing the motor ready for the new skylines as well as just a bloody good idea. I guy i know in japan has one rekons they really go good!!! Plus an importer confirmed that they are real as he showed me one he was bidding on and it had the engine and chassis numbers on the sheet and they said rb25det!!

Link to comment
https://www.sau.com.au/forums/topic/1237-r32-with-rb25/#findComment-25114
Share on other sites

From memory Nissan made about 47 R32's with the 25t motor, this was in the last month before the R33 was introduced. I've seen one myself, and was thinking about buying one a couple of weeks ago (workmate's brother has one...about NZ$5,500)

I recon they would be a great ride.

Other than that, the naturally aspirated R32 GTS25 is quite common here. They drive quite nice.

Link to comment
https://www.sau.com.au/forums/topic/1237-r32-with-rb25/#findComment-25744
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah, if I need to fit people in a car I'll just use the Mrs car, the MX5 is perfect for what I need as a fun little sports car for fun on the street As for getting in and out of the MX5, I have no issues as I am a short arse who does lots of mobility training 🥷 If anything, I have been looking at Daihatsu Hi-Jets for a work hack, I helped one of my mates move some stuff with one recently that he picked up from Just Jap, it was a little ripper and plenty big enough for what we needed, it would also be super handy for me as I do alot of gardening, and plan on having some veggie patches and native gardens in the place I buy next year when I retire I did alot landscape gardening and growing veggies prior to my current job, and loved it, and that is a hobby that can keep me sane in my retirement, and as such, the little 300kg load capacity would be more than enough for what I need it to move around I have been looking at utes for just this purpose for a while now, and a near new 2024 Hi-Jet can be had for under $30k And I would rather look at a quirky little Hi-Jet than pretty much any other little ute, well, apart from a Brumby, I love the little Brumby, and weirdly have never owned one yet I was going to buy a heap of raffle tickets to try and win the Brumby that MCM built for Subaru Australia, but sadly I totally missed the raffle, I even filled in some form to be told when the raffle started so I could buy tickets, but to my dismay I was never contacted and found out I missed it when I was randomly googling Brumbys last year... #conspiracy  Maybe I should just buy a Brumby for a little "work hack".....LOL I use to be indecisive, but now I'm not sure
    • Well.... it's not just "de-oxygenating". If you do that you just have, most likely, ethane. So you still need to do a synthesis step to combine a number of ethanes/ethanols to make circa-8-chain hydrocarbons. And of course you don't want straight chain HCs, because n-octane actually has a negative octane rating (ie, it's worse even than the n-heptane which sets the zero on the octane scale!), so you have to do some tricky catalytic chemistry to synthesise branched HCs. That's all doable - but it doesn't come for free. And.... it starts with ethanol, which is an agricultural product, and there will almost certainly never be enough of that as a base stock to replace the liquid fuels that are in use. You really wouldn't want to be planning to be using any more ethanol for fuels than is currently already used (in E10, E85s, etc). And ideally you'd be looking to reduce such usage, as it is largely wasteful, particularly in the stupid-ole'US-of-A where the corn lobby has organised it so that it's actually primary production corn that is used to make a lot of the ethanol, not by-products and waste, like it is (mostly) elsewhere. So, what I said about needing free-ish energy probably still applies. True synth fuels would be made from H2 and CO2, in a near reversal of the combustion process. In fact, given that the H2 would be split from water first, it actually is a complete reversal of the combustion process. But...energy intensive. The human race burns something like 1 cubic MILE of crude oil, after it has been made into various fuels. Every year. That's a simply stupendous amount of energy. Just assume that the density is 900 kg/m3, and that the calorific value is 45 MJ/kg, then that is 165.9 x10^12 MJ of energy. Or more than 10^19 Joules. You get a maximum of 1 kJ/s per square meter solar radiation falling on the planet's surface, and so if you halve that for daylight, and halve it again for average weather (highly optimistic) and then take ~25% for the very best efficiency of solar panels, then you need about 85.7 billion square metres of solar panels to generate enough electricity to replace that liquid fuel energy consumption. Each panel is about 1m2. That's a rather large number of panels. We also burn about a cubic mile of coal. We also use hydroelectric power. We also use nuclear. We also use a number of other sources, both "renewable" and not. You can kind of ignore the renewable ones (except for hydro, because it will all end up getting subsumed into pumped hydro for storing other renewables, and so it won't be the standalone renewable that it originally was), so we end up needing a multiple of the ground area number that I just arrived at.
    • Corvette thread then? Don't say I didn't predict the future again. "I love the little MX5, I do, but I just want something a little easier to get in/out of, a little more cushy and some power would be nice - I miss the V8 Rumble... I found this clean red C5 for sale recently and..." I'll do you a great deal on the next step, which is one of those but you can fit people in it, too.
    • What about renewable diesel and/or gasoline? I see some projects spinning up like de-oxygenating ethanol to make drop-in compatible bio-gasoline especially in CA. I still think the future is EVs and we should've all gone full throttle on nuclear power after the 1973 oil crisis like France. Despite 15 years of work in CA to reduce the CO2 intensity of generation with renewables our electric grid is still far worse than even "low carbon" nuclear power. ICE is pretty cool when you aren't depending on the stupid thing to be practical and reliable and cheap as possible to get you to work every day. It's kind of like mechanical watches or vacuum tube amps.
    • I just rolled over "my" first 10k km in the MX5 Every time I go anywhere it always ends up in a adventure to look at houses and find some random country roads I've been on leave since early November but unfortunately need to go back to work on 19 January Luckily though I still have a fair chunk of leave left to burn until.... Not that I'm counting 😁
×
×
  • Create New...