Jump to content
SAU Community

Recommended Posts

hi guys ive recently bought a r33 gts t

im new to these cars and the a lsd light comes on sumtimes for no reason as far as i know can any one help me with this is this a common problem and also are there certain hydraulic pumps and computers to check for the lsd or anything like this any info would be great cheers

Link to comment
https://www.sau.com.au/forums/topic/123814-a-lsd/
Share on other sites

Yes skylines can have an A-lsd light.

It means you have an active spec LSD version of the skyline.

Run some searches there's a shipload of info on this site about the A-Lsd.

As for it intermitently turning on. Do you have a power-fc? If you do I strongly suggest you look at the signature of a guy on here called PaulR33 as this is a fault that happens with the A-lsd failing and power fc's, but he's got the cure (read: DIY) to fix the problem.

If you don't have an Power FC.

Perhaps a fault with your abs sensors or the computer itself, or the hydralics, or a lack of fluid?

Link to comment
https://www.sau.com.au/forums/topic/123814-a-lsd/#findComment-2286171
Share on other sites

Some Gtst's came with the vspec diff you are very lucky as they are a rare option.

The A-LSD light in the tacho it only comes on if there is a problem. The ECU for the ALSD is in the boot. Does it stay on always or just come on now and then?

Chris

Link to comment
https://www.sau.com.au/forums/topic/123814-a-lsd/#findComment-2286173
Share on other sites

Nah, Actually, this site is pretty gay regarding a-lsd. I keep asking about certain things about a-lsd.

No one knows what fluid it uses. no one knows how to bleed the system.

No one actually knows how it performs relative to the normal gtr 2way diff.

Searching will get you info about fully sik people talking about fully sik stuff. but nothing actually useful about the a-lsd.

Like there's info about how people have installed fully sik power fcs into their fully sik skylines to make them fully sik and go quicker.

does someone actually know anything useful about the a-lsd? if so, please post.

Link to comment
https://www.sau.com.au/forums/topic/123814-a-lsd/#findComment-2286188
Share on other sites

Check fluid in a space in the boot on the right hand side, you'll see a little canister behind a little clipped on segment.

The fluid it takes is power steering fluid.

As for the microtech, this might be causing the problem, from memory the A-Lsd computer requires a signal from the ECU that aftermarket computers generally don't give and have to be modified to suit.

Here I've run the search for you, check this link out:

http://www.skylinesaustralia.com/forums/in...howtopic=107656

Now I realise that you don't have a power Fc, but the premise behind the solution should be the same for the microtech.

Link to comment
https://www.sau.com.au/forums/topic/123814-a-lsd/#findComment-2297867
Share on other sites

Yes skylines can have an A-lsd light.

It means you have an active spec LSD version of the skyline.

Run some searches there's a shipload of info on this site about the A-Lsd.

As for it intermitently turning on. Do you have a power-fc? If you do I strongly suggest you look at the signature of a guy on here called PaulR33 as this is a fault that happens with the A-lsd failing and power fc's, but he's got the cure (read: DIY) to fix the problem.

If you don't have an Power FC.

Perhaps a fault with your abs sensors or the computer itself, or the hydralics, or a lack of fluid?

hmmmm. i love it when people get credit for my work :

putting it simply.. while driving the light will come on when the wheels slip. (lets you know its working)

if not. you need to aply the tps signal to the a-lsd ecu. just check "moonie" 's topic on a-lsd. i fixed it for her at wsid :dry: with a multimetre and some eletrical tape :)

Link to comment
https://www.sau.com.au/forums/topic/123814-a-lsd/#findComment-2300251
Share on other sites

hmmmm. i love it when people get credit for my work :

putting it simply.. while driving the light will come on when the wheels slip. (lets you know its working)

if not. you need to aply the tps signal to the a-lsd ecu. just check "moonie" 's topic on a-lsd. i fixed it for her at wsid :) with a multimetre and some eletrical tape :whistling:

Hey man, apologies, credit where credit's due.

I just remembered following the post about the fault with the A-Lsd (As I have one in my car, but my ecu is still standard), and remember Paul copying it to his link on FAQ on A-Lsd's.

Link to comment
https://www.sau.com.au/forums/topic/123814-a-lsd/#findComment-2300910
Share on other sites

how about if someone actually says how to blled the syhstem and what fluid it uses?

There is a bleeder nipple on the right hand side under the car runs along the right hand chassis and is roughly above the diff cradle. Make sure the car is running and bleed out the air from there.

It is difinitley power steer fluid. It will also read low when the car is off! So don't over fill it.

Link to comment
https://www.sau.com.au/forums/topic/123814-a-lsd/#findComment-2301216
Share on other sites

cheers for all the info guys i mite attempt to bleed it on the week end there is red oil ontop of another coloured oil like some one said on a previous post in my canister so i mite replace it can anyone tell me a specific type of oil to use and a rough price

cheers guys

Link to comment
https://www.sau.com.au/forums/topic/123814-a-lsd/#findComment-2308992
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...