Jump to content
SAU Community

Recommended Posts

for starters, the link above doesnt show any electric super chargers as we know them. ie they arnt the blower type. looks at the site.

secondly, to make 2psi the so called electric supercharger has to make the 2 psi pressure ON TOP of what the engine is sucking in.

the blower type superchragers are rubbish, the things shown in the above site are rubbish.

steve

Ohh fair enough just got the link working in mozilla, hadnt seen it earlier, assumed he was talking about the type i was above.

dunno anything about these kits but they look like they'd work almost as well as the turbonator...www.turbonator.com... buy 3..

Edited by r32 gts-turbo

.. just looked at the product mentioned, and not a "Supercharger" as we know it but more a brand name that represents Voltage stabilizer kit.

I dont how people can charge (no pun intended) $999 your for what is basically a few capacitors and larger guage earth wire.

f*cking tossers. You may as well go buy some cheap magnets and stick 'em up your arse.

Please keep any ghey external electric supercharged 2 PSI hoo-ha out of this thread!! :)

Due to the name 'Electronic Supercahrger' I was under the impression that this actively raised amp/volts or the like :D I have no clue about electrics if you have'nt guessed :)

It's obvious there is no viable reason for them to be asking the stupid amounts of $$$..

But could someone go into more detail how these are meant to work and what benifits can be had?

theres no way you can actively raise voltage/current.

best thing to do, is have a nice clean set of battery terminals, clean connectors on your alternator, and some nice thick wire bolted from various points around the the engine to the engine bay. Also have a fat wire running from the negative battery terminal to the clean spot on the engine and car body.

a good earth can solve some weird problems.

you can invest in a kit if you want name brand stuff, or you can go to dicksmith/marlow and get some thick black cable and make your own kit.

Steve

for ~600 you can run at 2psi... on a small engine.

Think about it - they run on 12V DC...

I did a fair bit or research on them - for my magna (when I had it). It it was $200 I might have considered it (and it still would probably have been a waste of money). If you really want, I could share it. Just don't expect me to be nice about it.

You have a turbo charged car. Why get 1/4 kw for the first 1000 rpm in return for blocking the air intake when the turbo spools? spend the money on something that improve your car

Noticed an ad in HPI #67 for an Australian company called Cre8tec. The product they were advertising was the 'Electronic Supercharger' Wich they claim can increase engine torque by up to 20%!! Umongst other things. Has anyone used this product? Is it probable that it could help with increasing turbo response?

Also have heard stories of slightly increased turbo response from installing Earthing kits. These are getting cheap now days.

Thoughts and experiences please :(

Due to fools spamming up this topic.. This is what the so called 'Elctronic Supercharger' looks like

-It has no fan

-It does not make boost

-It does not restrict the inlet passage

This is the $999 version :happy:

Forgive me for getting the wrong impression. Understandable (I think), but wrong nonetheless. It "supercharges" the electronics. Looks like an earthing kit with some sort of ballast(capacitor?).. Um.. an expensive earthing kit.

I don't see how this could have an effect on boost (unless your plugs are dead to begin with - and even then...)

So, sorry I was wrong, but I still say its a rip off. you could DIY it pretty easy - though I wouldn't really like to think about what a capacitor would do to voltages and power (electric - real and 'imaginary') when the spark plugs are firing. I guess it wont kill the car... and if you DIY, you can always unDIY...

**fool spamming up the topic, out

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...