Jump to content
SAU Community

Recommended Posts

Even if you don't have the plates, if you've got the colour and series of the Commodore I'd report it to the cops anyway.

Hopefully they can keep an eye out for it, and lean on the f**ker if they ever see him driving past. RBT him, get him to pop the bonnet, etc.....

Glad to hear that you're OK though.

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

I have reported things like this to the police before and always something is done about it. If you were shaken up enough to report this guy there is a good chance he's done it before and someone else has reported him so the police know exactly who it is already.

Hope you're going to be OK !! Just remember, Sydney has a insane amount of drivers on the road and sooner or later you're bound to come across the occasional idiot. Just avoid them as best you can and let them go on their way. If you're really lucky you'll pass them further down the road after they smash into a tree :D ( I speak from experience on that one ).

Heh, reminds me of the time a battered old ford laser cut in front of me, & over the hill, got over the hill there was the battered old laser, with half of the passenger side scraped onto the side barrier. Driver was lucky he wasn't hurt, just standing next to what was left of his car cursing & kicking the wheels.

Good to know there is justice in the world after all

Ok I have some very good news. I was outside my house tonight in my friends car when this car sped up my street again so we followed him. I think he knew though because we went around a few streets to make it look like we werent following them and they ended up behind us. This time they did not tailgate at all and drove normally so I am now 100% sure it is because I was in a skyline.

Anyway I managed to get the rest of the number plate and so I printed out a statement I made and went down to the local station. I wasn't actually going to but I am very glad I did.

The cop was really nice about it and I explained to her that I drive a skyline and this kind of thing happens all the time and we were talking about that for a bit. To cut it short- she said I had 2 options.

1. They could go and interview the driver and it could end up in court with me against them, but because I park in my driveway that isn't really an option.

2. They will distribute the details to every cop in the region and I call the police every time I see this car.

The lady I spoke to said she was actually going out driving tonight and will keep a lookout for it. She also said if I call them often enough they will set this car up and put an unmarked highway patrol car in the area to get them.

Now I am fairly certain I will be calling the cops every single night because I found out something very interesting.

Basically there is an 18 year old junkie that lives across the road. Tonight a car that looked and sounded very similar to this commodore dropped him off. I am pretty sure it is the same car and if so they are going to get completely screwed over. I know for a fact that he goes out and does drugs every night, he has lost his license and so have most of his friends. I have seen this car drop him off every single night for the past few months but it never occured to me that it was the same car until I saw them half an hour ago.

It may sound a bit extreme but I intend to make sure they lose their license because I really don't feel safe on the road with them around.

Sorry to hear it. Where has all this happened? I've experienced quite a few royal arse holes in the glenfield to campbelltown area which is where i am all the time so if its around there i've probably experienced this *%$*#. Some are just outright wankers and i'd love to follow them and get my own back but if i do anything when in my car they'll be able to remember my plates easy and spot my car later on. Not worth it.

As for the cops, good luck. I had full car description and plates of a vehicle that robbed our house and the cops did nothing! But they were more than happy to book me for fog lights several years ago when i didnt know it was illegal AND it had been raising and was foggy in places. Some are just as bad as the wankers on the streets.

Edited by Xizor

Yeah, the last thing you want to do is start a feud with the neighbours.

Things will escalate if they think you've got the cops to lean on them, and especially if they're f**ked off their nuts on drugs they'll do shit that no reasonable person would ever do because they're not rational.

I mean, we'd arrange a SAU lynch mob to sort the asshole out afterwards, but by then the damage would be done.

Ask the cops if they can keep your report anonymous, and if you PM some other members the details we can call the cops up to rack up his tally of complaints..... :(

And when they ask who reported them, the cops can reply with "a whole bunch of people" instead of just you.

Edited by scathing

it sucks when people drive badly around you, but amanda i have to say brake testing someone is never going to calm things down. and if he had reacted poorly and run into the back of your car chances are he would have jumped out, reached into your car yanked you out through the window and then lights out. maybe he'd just beat you up, maybe much worse.

my advice is let it go. nothing happend to you. you were pissed off because he acted like a tool (and i have no doubt what he was doing was very dangerous) but in the end you weren't hurt, your car wasn't damaged so I say leave it be. the only thing that came out of it was you were upset. dont waste more of your time on trying to make someone elses life miserable. in fact if he is a junky then he already has a miserable life.

if u have a glass bottle, or a can of coke, or better yet a club lock, simply get in front of him and chuck it out aiming for the driver side, dead bogans cant talk

nah dont take that seriously, just let it go, you run into idiots every once in a while, just take it as it comes as long as ur not in serious threat (if you are then you take action against them like something similar to mentioned above). like baron said, he is already miserable scum so let it be.

Let it go, theyre probrably idiots but I know that if anyone "brake tests" me I make their life hell. If you make a big deal out of it they will probrably start making your life hell for an extended period of time.. especially now they know your car and where you live. It's not a generally good idea to do it, I'm guilty of it on a few occasions to a few wankers but that's only because I couldn't give a shit if my car got burnt down overnight :)

Sounds like a p plater that will encounter a car load of boys who will sort him out.

Good thing you weren't hurt - don't stress too much and don't let it get to you.

if u have a glass bottle, or a can of coke, or better yet a club lock, simply get in front of him and chuck it out aiming for the driver side, dead bogans cant talk

Dumbest thing I've heard today. Stop listening to 50 cent.

Its Mr Fiity Cent to you!

Yeah, amanda, your ok, which is the main thing, your car is ok which is the 2nd thing, so dont stress to much. if you waste time on that loser then he is getting what he wants - a reaction. Either leave it well alone or past it on to the relevent authorities.

Let it go, theyre probrably idiots but I know that if anyone "brake tests" me I make their life hell.

Whenever anyone tries to tailgate me, I slow down... If they don't get off my arse, i slow down to 10km/h... then 5km/h...

They usually decide to go around.

But the boys above are right, you don't want some dodgy Junkies after you.

i think you should keep on them. its people like this that we dont want on the roads and who kills innocent familys with there careless driving and miss-judgement.

i wouldnt think it of getting your own back at them, but saving somone elses life, because ya cant drive like that and somthing not go wrong eventualy.

they may be passing a car and someone walks out on the gutter and gets hit. or they pass someone on a blind corner (seen it happen) and have a head on with a young mother on her way to work.

think about it people, would you realy want someone like that, or anyone like that driving around risking there life and yours all the time? i sure as hell wouldnt.

if noone speaks up and just sits on there ass, then more people are going to get killed by these reckless drivers.

.. and i hate P platers who do shit like this, because im a P plater too and cop shit from alot of people because of that. and thats because P platers like this are absolute fu*kwits on the road and we get stereotyped instantly as idiots.

i think you should keep on them. its people like this that we dont want on the roads and who kills innocent familys with there careless driving and miss-judgement.

i wouldnt think it of getting your own back at them, but saving somone elses life, because ya cant drive like that and somthing not go wrong eventualy.

they may be passing a car and someone walks out on the gutter and gets hit. or they pass someone on a blind corner (seen it happen) and have a head on with a young mother on her way to work.

think about it people, would you realy want someone like that, or anyone like that driving around risking there life and yours all the time? i sure as hell wouldnt.

if noone speaks up and just sits on there ass, then more people are going to get killed by these reckless drivers.

.. and i hate P platers who do shit like this, because im a P plater too and cop shit from alot of people because of that. and thats because P platers like this are absolute fu*kwits on the road and we get stereotyped instantly as idiots.

I think its better to leave it to the police, rather then making it a personal mission. Its fine to do your part, which would be passing information on to the police. But dont get involved because it can cause problems later down the track if the victims get back at these persons.

I think its better to leave it to the police, rather then making it a personal mission. Its fine to do your part, which would be passing information on to the police. But dont get involved because it can cause problems later down the track if the victims get back at these persons.

no no i think you miss understand me. i wasnt saying to make it a personal mission. i was saying to tell the police about it, and not just sit back and wait for someone else to do somthing about it which so many of us do. hell i do it too from time to time, im not saying im perfect

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks, I removed the fuse and the relay from the car and made my own circuit with them to test them with a test bulb.  I will look for the wiring diagram and go from there.
    • Jdm DC2R is also nice for a FF car compared to the regular hatches of the time.
    • Now that the break-in period for both clutch and transmission is nearly over I'd like to give some tips before I forget about everything that happened, also for anyone searching up how to do this job in the future: You will need at least 6 ton jack stands at full extension. I would go as far as to say maybe consider 12 ton jack stands because the height of the transmission + the Harbor Freight hydraulic platform-style transmission jack was enough that it was an absolute PITA getting the transmission out from under the car and back in. The top edge of the bellhousing wants to contact the subframe and oil pan and if you're doing this on the floor forget about trying to lift this transmission off the ground and onto a transmission jack from under the car. Also do not try to use a scissor jack transmission lift. You have to rotate the damn thing in-place on the transmission jack which is hard enough with an adjustable platform and a transmission cradle that will mostly keep the transmission from rolling off the jack but on a scissor lift with a tiny non-adjustable platform? Forget it. Use penetrating oil on the driveshaft bolts. I highly recommend getting a thin 6 point combination (box end + open end) wrench for both the rear driveshaft and front driveshaft and a wrench extension. These bolts are on tight with very little space to work with and those two things together made a massive difference. Even a high torque impact wrench is just the wrong tool for the job here and didn't do what I needed it to do. If your starter bolts aren't seized in place for whatever reason you can in fact snake in a 3/8 inch ratchet + 6 point standard chrome socket up in there and "just" remove the bolts for the starter. Or at least I could. It is entirely by feel, you can barely fit it in, you can barely turn the stupid ratchet, but it is possible. Pull the front pipe/downpipe before you attempt to remove the transmission. In theory you don't have to, in practice just do it.  When pulling the transmission on the way out you don't have to undo all the bolts holding the rear driveshaft to the chassis like the center support bearing and the rear tunnel reinforcement bar but putting the transmission back in I highly recommend doing this because it will let you raise the transmission without constantly dealing with the driveshaft interfering in one way or another. I undid the bottom of the engine mount but I honestly don't know that it helped anything. If you do this make sure you put a towel on the back of the valve cover to keep the engine from smashing all the pipes on the firewall. Once the transmission has been pulled back far enough to clear the dowels you need to twist it in place clockwise if you're sitting behind the transmission. This will rotate the starter down towards the ground. The starter bump seems like it might clear if you twist the transmission the other way but it definitely won't. I have scraped the shit out of my transmission tunnel trying so learn from my mistake. You will need a center punch and an appropriate size drill bit and screw to pull the rear main seal. Then use vice grips and preferably a slide hammer attachment for those vice grips to yank the seal out. Do not let the drill or screw contact any part of the crank and clean the engine carefully after removing the seal to avoid getting metal fragments into the engine. I used a Slide Hammer and Bearing Puller Set, 5 Piece from Harbor Freight to pull the old pilot bearing. The "wet paper towel" trick sucked and just got dirty clutch water everywhere. Buy the tool or borrow it from a friend and save yourself the pain. It comes right out. Mine was very worn compared to the new one and it was starting to show cracks. Soak it in engine oil for a day in case yours has lost all of the oil to the plastic bag it comes in. You may be tempted to get the Nismo aftermarket pilot bearing but local mechanics have told me that they fail prematurely and if they do fail they do far more damage than a failed OEM pilot bushing. I mentioned this before but the Super Coppermix Twin clutch friction disks are in fact directional. The subtle coning of the fingers in both cases should be facing towards the center of the hub. So the coning on the rearmost disk closest to the pressure plate should go towards the engine, and the one closest to the flywheel should be flipped the other way. Otherwise when you torque down the pressure plate it will be warped and if you attempt to drive it like this it will make a very nasty grinding noise. Also, there is in fact an orientation to the washers for the pressure plate if you don't want to damage the anodizing. Rounded side of the washer faces the pressure plate. The flat side faces the bolt head. Pulling the transmission from the transfer case you need to be extremely careful with the shift cover plate. This part is discontinued. Try your best to avoid damaging the mating surfaces or breaking the pry points. I used a dead blow rubber hammer after removing the bolts to smack it sideways to slide it off the RTV the previous mechanic applied. I recommend using gasket dressing on the OEM paper gasket to try and keep the ATF from leaking out of that surface which seems to be a perpetual problem. Undoing the shifter rod end is an absolute PITA. Get a set of roll pin punches. Those are mandatory for this. Also I strongly, strongly recommend getting a palm nailer that will fit your roll pin punch. Also, put a clean (emphasis on clean) towel wrapped around the back end of the roll pin to keep it from shooting into the transfer case so you can spend a good hour or two with a magnet on a stick getting it out. Do not damage the shifter rod end either because those are discontinued as well. Do not use aftermarket flywheel bolts. Or if you do, make sure they are exactly the same dimensions as OEM before you go to install them. I have seen people mention that they got the wrong bolts and it meant having to do the job again. High torque impact wrench makes removal easy. I used some combination of a pry bar and flathead screwdriver to keep the flywheel from turning but consider just buying a proper flywheel lock instead. Just buy the OS Giken clutch alignment tool from RHDJapan. I hated the plastic alignment tool and you will never be confident this thing will work as intended. Don't forget to install the Nismo provided clutch fork boot. Otherwise it will make unearthly noises when you press the clutch pedal as it says on the little installation sheet in Japanese. Also, on both initial disassembly and assembly you must follow torque sequence for the pressure plate bolts. For some reason the Nismo directions tell you to put in the smaller 3 bolts last. I would not do this. Fully insert and thread those bolts to the end first, then tighten the other larger pressure plate bolts according to torque sequence. Then at the end you can also torque these 3 smaller bolts. Doing it the other way can cause these bolts to bind and the whole thing won't fit as it should. Hope this helps someone out there.
×
×
  • Create New...