Jump to content
SAU Community

Recommended Posts

I'd suggest the quickest GTS-T award might be closer to this mark

http://www.dragtimes.com/Nissan-Skyline-Timeslip-8760.html

8.625 @ 161, 1.39 to 60 ft, half track 5.58 at 130 mph, maintaining the IRS with a powerglide , a shot of gas and a RB26

all cheating when you go to the auto and add gas.... Just jokin.. Good on ya Hiroki Matsumoto :(

BTW, I've run quite a few 9 sec passes at around 145 mph using a crossply rear and radial front, and never had a problem - its legal to do so in NZ, where the tracks are dodgy (being polite, some are downright crap). Ovrer in Australia, I was forced by the rules to run front runners, and have noticed absolutely SFA difference in the ride stability compared to the radial front/crossply rears.

My theory is with the independent rear suspension, stability in the big end is much better than something with a live axle.

Ben D S12 Gazelle RSX, 9.38 and 153.9 mph, 1.33 to 60 ft, stock IRS and 5 speed manual

I'd suggest the quickest GTS-T award might be closer to this mark

http://www.dragtimes.com/Nissan-Skyline-Timeslip-8760.html

8.625 @ 161, 1.39 to 60 ft, half track 5.58 at 130 mph, maintaining the IRS with a powerglide , a shot of gas and a RB26

all cheating when you go to the auto and add gas.... Just jokin.. Good on ya Hiroki Matsumoto :(

Is that the one with the tube chassis, and nothing more than a seat, cage, mighty rear tubs... Oh... and a steering wheel?

:(

Is that the one with the tube chassis, and nothing more than a seat, cage, mighty rear tubs... Oh... and a steering wheel?

:dry:

Have you checked out projectgtst.com ?

It has a carbon fibre dash and nothing inside the cabin - not so difficult to compare.

Benny, I think the stability in the Gazelle comes from the lack of door trims :dry:

Seriously though, I've seen 12 second R33's suffer from xply/radial combos.

Adrian

No, it has door trims, just alloy ones, not OEM. Must be when you take the headlining out when you add the rollcage. All that extra 2 kg of weight in the roof must be what does it, though I thought that the metal in the cage would off set that somewhat....

Might be the tyre pressure difference between fronts and backs then ? I never run really low tyre pressures (less than 15 psi) so maybe thats it.

Have you checked out projectgtst.com ?

It has a carbon fibre dash and nothing inside the cabin - not so difficult to compare.

actually i didnt :huh:

I would have thought it wouldnt have been totally stripped to around 1200kg's... thats intense

Is Brett's stripped? What does he tip the scales too?

I know Ryan Quinn's still has the full dash and all that jazz, being its street driven etc. So probably around the 1400kg mark, if not more

actually i didnt :D

I would have thought it wouldnt have been totally stripped to around 1200kg's... thats intense

Is Brett's stripped? What does he tip the scales too?

I know Ryan Quinn's still has the full dash and all that jazz, being its street driven etc. So probably around the 1400kg mark, if not more

Brett who?

Hi guys,

Many thanks for some of your kind comments.

God knows if we have taken the right decision to go down the RB25 route but if you dont try then you'll never know i guess.

Please dont think all of the shouting about the time means we dont realise how far behind we still are from you guys with the times you have set (RB26 or not) ie/ awesome 9.4 etc etc. I nearly died of shock when I found out someone in japan has done an 8.6 sec pass ! - lol

Have to say it's great to be talking to you guys in Aus as for years now you have been developing GTST drag cars whilst in Europe there has not been an awful lot of activity (best previous UK best time 11.2 secs).

I honestly do think we can get an 8 out of the engine we have at the mo - may take some time though.

We have a lot of testing to do before October when the car next runs & finally we can turn the nos on now & turn the boost on thanks to finding grip with the suspension. The gearbox will make the biggest difference in terms of time saving but what a great box the std has been too date - so bloody strong.

We will also need to look at the drive shafts - snapped both off last time as well - lol

Be great to see another 8 sec GTST anywhere in the world whether it's in Aus , Uk or anywhere - they have been overlooked for far far too long

John

Please dont think all of the shouting about the time means we dont realise how far behind we still are from you guys with the times you have set

Mate, I'm really not trying to be cheeky - unusual for me I know :) - but if the above is true, why the crowing about an FIA certifiable record on GTR.CO.UK ?

Adrian

Hi guys,

Many thanks for some of your kind comments.

God knows if we have taken the right decision to go down the RB25 route but if you dont try then you'll never know i guess.

Please dont think all of the shouting about the time means we dont realise how far behind we still are from you guys with the times you have set (RB26 or not) ie/ awesome 9.4 etc etc. I nearly died of shock when I found out someone in japan has done an 8.6 sec pass ! - lol

Have to say it's great to be talking to you guys in Aus as for years now you have been developing GTST drag cars whilst in Europe there has not been an awful lot of activity (best previous UK best time 11.2 secs).

I honestly do think we can get an 8 out of the engine we have at the mo - may take some time though.

We have a lot of testing to do before October when the car next runs & finally we can turn the nos on now & turn the boost on thanks to finding grip with the suspension. The gearbox will make the biggest difference in terms of time saving but what a great box the std has been too date - so bloody strong.

We will also need to look at the drive shafts - snapped both off last time as well - lol

Be great to see another 8 sec GTST anywhere in the world whether it's in Aus , Uk or anywhere - they have been overlooked for far far too long

John

Good to hear from you John, love to follow your exploits as you work towards an 8 in your beast!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...