R33 Gtr Wing

[AHJ]

hi guys, i wanna ask how to remove the top blade of the R33 GTR wing, since i wanna change that part to carbon fibre. i had tried to remove the side cover and unscrew 2 of the screws, but i stuck with 2 screws that i cannot undo them, they are in different pattern, what kind of tools do i need to remove them? thanks a lots!

[AHJ]

anyone can help?thanks!

[GTRgeoff]

They are a torx pattern. Try hardware or $2 shop.

[MANWHOR3]

what I did is after I removed the torx thingy, I replaced it with an allen key one.

I know it was pretty pointless, but I had the perfect size ones at home...

[AHJ]

thanks! i will try to get the tool n remove it.

[nizmokid]

where did you get your new blade from mate?

[pistol-pete]

sorry to bump an old thread but i just tried removing the blade from mine and one of the torx screws was done up so tight i stripped the f$!@$r!!!

anyone have some advice on the best way to get it out? dont car if the thing gets destroyed, just need it out so i can replace the blade.

thanks.

[Pezhead]

sorry to bump an old thread but i just tried removing the blade from mine and one of the torx screws was done up so tight i stripped the f$!@$r!!!

anyone have some advice on the best way to get it out? dont car if the thing gets destroyed, just need it out so i can replace the blade.

thanks.

Is the torx screw stripped or is it free spinning not going anywhere? If stripped then use a drill and easy out to remove. Mine was free spinning meaning that the nut in the fibreglass had broken free. I carefully (and I mean CARFULLY) used a dremmel with a cut off wheel to grind the whole head off. Then sandwiched a wide flat screw driver between two sheets of cardboard to open the rear blade holders enough to get one side free.

Was a pain but was the only way for me to get mine out.

[pistol-pete]

mine was stripped. problem solved though, i drilled it out. still very annoying.