R32 Tailshaft Bearing Kit

[menphus]

Hi all,

I have a bar viabration and i think its my tailshaft. so i was going to do a overhall.

Dose anyne know of where to get the parts and a rough price.

cheers

[brett33]

Hi all,

I have a bar viabration and i think its my tailshaft. so i was going to do a overhall.

Dose anyne know of where to get the parts and a rough price.

cheers

Ya can't over haul the uni's. They're not replaceable. You're up for a new shaft. I had the last one made one piece. Saved 150 bux by doing that. Cost me $450

[turboedsloth]

why cant u replace the 2 uni joints and the centre bearing?

[menphus]

i am thinking a one piece is the go, thats the answer i am getting all the time.

thanks for your time

cheers

[brett33]

why cant u replace the 2 uni joints and the centre bearing?

They are permanently crimped in. Not replaceable.

[B0oStEr]

The staked unijoints are replaceable if you use a die grinder to remove the stakes.

Replacement joints are available at about $75 ea trade.

They use circlips inside the yoke to retain the caps.

Unfortunately they use a smaller trunnion than the stock unis so they probably wouldn't be as strong.

A custom one piece would cost less than a full 3 uni, center bearing rebuild but if it's only one crook uni they are a cheap fix.