Help Needed? R33 Crossmembers And Control Arm.....

[85URK]

i am in need of a r33 gtst engine crossmember (K frame) and also a righthand lower control arm. i was wondering if any1 knew if there is a differnce between the 2 from a series 1 &2 models, will they fit each other??? any help would be appreciated.

thanx

[85URK]

so no one has an idea about this Q's?

[R33S2]

according to fast it is the same part number although to confuse matters it lists it from 93/08 to 95/01 then 96/01 onwards for the r33???

[Nathan_G1]

where u from buddy? im taking my lower control arms off at the moment and putting sum adjustables on, i can sell ya mine, i dont have a cross member tho, but im sure i can find one

series 2 and 1 are pretty much the same from my knowledge, bonnet and interiour and headlights are different im pretty sure

[85URK]

i am in sunshine coast, Queensland.

and you are??

[85URK]

according to fast it is the same part number although to confuse matters it lists it from 93/08 to 95/01 then 96/01 onwards for the r33???

well i think what they are saying there is the last of the r32 crossmember parts was made up until 01/95.....

which as far as i know they made R32 in 94 models, so that would make sense.

they must have still been rolling the r32 parts off the production line up until then i guess.

Edited July 1, 2006 by 85URK

[R33S2]

If you end up buying 2 I'll take the other.

[85URK]

If you end up buying 2 I'll take the other.

well ive found a half cut at the local import wreckers, so im getting it from that. so only buying what i need.

[r33_racer]

I believe front lower control arms off r34s are also the same.

[85URK]

I believe front lower control arms off r34s are also the same.

oh well if some one could confirm that it would be useful for future references.

[r33_racer]

I have one on my car...lower control arm p.s is off an r34 from the wreckers. Ok well the part was labeled r34 and it fitted and was identical to the r33 one i took off. But i wouldnt take my word for it...just incase the wreckers had buggered up.

[85URK]

I have one on my car...lower control arm p.s is off an r34 from the wreckers. Ok well the part was labeled r34 and it fitted and was identical to the r33 one i took off. But i wouldnt take my word for it...just incase the wreckers had buggered up.

yeah thanx anyway, some times wreckers do stuff up with parts. but u mite be right still. the half cut i have founf is a S2 R33. so i should be right anyway. thanx for your info though.