Jump to content
SAU Community

Recommended Posts

  • Replies 128
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I dove around for a year and a half with no rego sticker aaaaaaaaaaaaaaaaaaaages ago in an old beatup KE70 corolla, as long as you dont do anything stupid cops leave ya alone.

ALTHOUGH I do NOT endorse this as with no rego you have no CTP which protects everyone's medical bills in the event of an accident.

Well i cracked my windscreen, hgad to get a second hand one. am waiting on a sticker from the dept of transport... lol worked for me. i was shitting my pants the whole time, though... that was me sitting in a metallic hot pink cressida, (for my fiance) looking like a homo. Fantastic. They just said ok and let me go. i was pulled over at an RBT, and they didnt check the plates... since that day, ive never driven an unregistered car. too scary.

Cant wait to see some pics of it in the sun!

PS if you find the fuel consumption a bit much, ill swap my 25DET for the 26DETT... ill pay for postage too... :-)

What's the go with the number plates? If it has not been complied yet it can't be registered...

Looking vey nice by the way!

yea it was my younger bro's isea to put on the old plates of his. SSSHHH!!!!!! Although the car for registered for 2 days i bought a temp rego for it but want to save of the hassle being pulled over by the cops.

Ska what kinsd of bumper you've got? Also fuel consumption are pretty thirsty if you tharsh it its like me in the onld days guzzling beer!! >_< . Thats why as soon as i found out from Racepace that Power Fc can save fuel i when and bought one in the group buy. so...

BTW took the car in to kamikaze today for compliance. They will start the process on monday and it will take 2 wks then rego. Will keep you guys posted

Mate I just have the ugly stocker S1 bar, as seen here:

http://stagea.st.funpic.org/080305.html

I am pretty sure you dont want to swap you're beautiful bar for a stocker >_<

i will be nuts if i did :sick:

just went and saw my car today at the compliance place today. they told me that its goin to be a delay for about a week for it to be complieed since im the first of its kind that they are doing it. They need to confirm a few things with the engineers. so will let you guys know again next week

BTW there was a white DAYZ and a silver rs4 in their workshop wonder whose is it? anybody got an ideaa?

I drove past kamikaze motors today yudy and i saw your car parked outside, i was going to park my car and go up and have a closer look but i had a few things i needed to get done, let me know when you pick your car up and ill see if i can meet you there,

so we can meet in person

Simon

I drove past kamikaze motors today yudy and i saw your car parked outside, i was going to park my car and go up and have a closer look but i had a few things i needed to get done, let me know when you pick your car up and ill see if i can meet you there,

so we can meet in person

Simon

Sure FLY not a problem. I told them i want to pick up the car on a thursday(not this coming thursday but the next want). So i have time to bring it to a mech to check the whole car.

Alex you want to come as well?

Yudy,

would be careful making statements about them ripping you off on a public forum I am sure that someone from there would most likely post on here and word could get back to them and if they still have your car its a bit risky. Also I am sure the fuel tank in the Stagea is different to the GTR so the filter is different and the sump on the stagea is different which brad has mentioned Before during his GTR engine conversion so the oil filter probably is different and if they require genuine parts this may be added cost.

I dont agree with them not giving you a discount for providing your own fluids though but if you said that they were doing this one below cost then maybe thats why they wont move on price. Bear in mind that if it is indeed the first car that they have done they may need to consult the engineers more than they will need to for future cars so this consult is not free engineers charge like wounded bulls so this could be where the added costs come from.

When you signed an agreement with them did you have to fill in a form to agree to them complying your car? I did and it says clearly on the form the price and that there is no discount and that if there is any additiional parts required other than the parts used normally to comply a stock car then I pay for them. I agreed to that and if there is an added cost I need to wear it

My 2c

Flysly I agree with you about price most companies that do both compliance and sell cars are more expensive as they would rather keep the plates for their own stock more money to be made there as the profit margins for compliance are lower than a car quite obviously.

Wildcat found this out the hard way with the guys in Perth who complied her car they took way longer than they should have and were very pricey time delays most likely related to the fact that they have lots of new stock arriving for their yards all the time and these cars are more important to them. I am sure kamikaze is the same and put their own cars first.

You never can tell if someone is Bullshitting you but personally if I have a bad experience with a company I wouldnt be bagging them until I had my car back as you never know how spiteful some people can be and I am pretty sure there is no warranty on complaince work someone correct me if I am wrong.

After you have your car back definately tell everyone about your bad experience and dont go back there but not until then.

good idea mcnamg well to tell you the truth i didnt sign any paper works at all. i was just being told to go drop it off at the compliance and thats it, when i got there i ask them wheter i need to fill out any paperworks?! there said no need and that was it.

Ohh well i guess im just so pissed off thats all cant get a straight answer. I guess im already too far in it already and have to go through it and get my car out from there.

3post-27949-1152279760.jpg

heheh those plates are cool, even if they are temporary... すき in japanese (su.ki), naturally, it sounds like 'ski'... it means 'like', as in ' i like this car!!!' yatta! :P

Edited by imaspy

My complaince workshop faxed me a service agreement with some dotars paperwork and asked me to signe them and send them back they basically tell me that if the car is found to be not suitable for complaince that they are required to send the car back to japan or destroy it at my cost and what those costs are. Also tells me what the go is with regards to needing to provide evidence that the car has been deregistered and degassed and that I have to pay to have it regassed and any additional costs involved with returning the car to stock are mine

heheh those plates are cool, even if they are temporary... すき in japanese (su.ki), naturally, it sounds like 'ski'... it means 'like', as in ' like like this car!!!' yatta! :P

cool what a coencidence!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Right, its been a while for updating this car, but I made some small but important progress today. In the end I bought an Ecutek dongle from the Australian distributor Tunehouse (for local hardware support) but have gone with a remote tune from Racebox in the US (because they have done millions of these, and I could not find any tuner where I could access the tune anyway as they are all password locked). The App is reasonably easy to work with, but the PC software reminds me of Haltech's ECU Manager that you need to use with the Plat Pro ECUs, it is a nightmare.  Anyway, I sent the details over, got back a tune file and a request for data logs. I finally got a chance to access a private test track today as they want redline logs in 3rd and 4th, and have sent them back for the first round of reviews. The main difference in the tune is going from 1.0 (stock) to 1.3 bar (19psi), although I'm sure is a lot of other stuff in the background. Keeping in mind this is a dead stock car with 125,000klm, this is what the App's performance test claimed: Before After Interesting to note that both 400m tests had the same terminal speed (158klm/h) but different ETs. And no, the speed limiter seems to be higher than that at 186kl/h. Summary of the key logged parameters for the 3rd and 4th gear runs were: Those little turbos were certainly whizzing at 200,000rpm+.  Also I'm really not that excited about oil pressure 55psi at redline so I think I'll go thicker than 5w30 (nissan recommend 0w20....) and see if that improves it. Other than that (and the big boost spike....) everything looks good as a start to me.
    • Just one more post to show the final result and the original "janky" solution for a laugh. Everything feels really tight and no wobbling at all, very pleased 🙂
    • After drying a few days, time to put her back together 
    • The hot exhaust light will come on not from just the cat being blocked, but it's just a temp sensor, and it's designed to warn you to not do things like park in long grass.   If you've been pushing the motor a bit, it can cause the light to come on.   Second if the cat is rattling, I'd suspect it's not blocked, but instead falling apart inside.   The easiest "fix" until you can get a cat put back in, is to unbolt your one, bash the rest of the insides out, and then bolt it back in.   For a daily driver/street car, I am in agreeance of put a cat in the car. If it were race car I wouldn't care if it were removed.
×
×
  • Create New...