Jump to content
SAU Community

Recommended Posts

crank the climate control to like 28 or so... no fog. winnah.

I actually turn the temperature down to get rid of the fog.

Which works better to clear a foggy windscreen, aircon heating up or cooling down?

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

I actually turn the temperature down to get rid of the fog.

Which works better to clear a foggy windscreen, aircon heating up or cooling down?

Cold air.

Think of a milk bottle when you take it out of the fridge. It forms condensation on the OUTSIDE, because the room temperature is much warmer than the cold milk.

Same thing. You get fog on the inside of the windows because it's much warmer inside the car than the cold air outside. Turn on the air conditioning as cold as you can get it to quickly normalise the outside and inside temperature of the glass to get rid of the fog.

Voila :D

both work.

But Cold air works x10 faster than warm air, especially if you have just started the car so the air will be warm at best if you use the heater.

in summary, use cold air :D

exactly !!!

so why is this even a topic of debate?

I've been using cold air to clear up the windscreen since the 80's. lol.

everyone knows it's the best way.

Yep, just what I was going to say. I spit in my dive mask, rub it all over inside of the lens, then rinse in seawater before putting it on.

Note: This may prove impractical for in car use. :D

spit?

I just set the fan to high speed, heater to high, and air source to fresh (not re-circulate). If you have re-cric set, you're just reusing the moisture laden air inside the car (from breath, having just come out of the gym or whatever), fresh brings in the moisture free (as it's cold) air from outside. This clears car within seconds.

Warm air can contain more moisture than cold air, so when the warm air inside the car hits the cold windscreen, it cools down, and can't contain all the moisture it has, so dumps it on the inside of the screen. Blowing hot (fresh) air over the inside warms up the windscreen, and as it's got a low relative humidity (moisture free cool air heated up, can then contain more moisture, so the RH goes down), it also takes up the moisture that is on the screen already. As a bonus, it's warm air so won't freeze your nuts off.

depends on whether the fog is on the inside or the outside. if it is on the outside then it is frost forming and you need hot air to get rid of it. you can spray your wipers but it comes back, except where the water actually hit the windscreen.

if it is on the inside then cold air for a short amount of time. if you leave it on too long you end up getting mist on the outside and have to go hot.

and fog-x is ok, but leaves a film which annoys me. i hate and haze on the windscreen. i don't know how some people drive with a dirty windscreen.

Edited by mad082

When I put my e-tag on the windshield it comes with an isopropyl alcohol wipe to clean the glass before you apply the holder.

I wiped the area around where I mounted it liberally, and it didn't really leave a film or anything on the glass (that I could see).

A few days later when it was pissing down raining, the area I cleaned was the only place where it didn't fog up.

I need to find some place that sells that stuff in bulk for cheap.

Fog-X didn't work for me (I found it fogs up worse) but I might have overapplied it.

charlier34 = from your name im guessin u have r34 or ur description says rb20det, wat car u got ???

i dont think on r32 u can have the air blowing on the windscreen without havin the ac on. but all i do is have the ac on and up the temperature to medium/warm. jus cauz u got the ac on duznt mean u cant set temp to warm so u dont freeeeeze.

u get isoprophyl alcohol from chemists :thumbsup: hope that helps

i didnt know until like 2 weeks ago that demister was onli on the back, lol

that was news to me then i realised my air con was on cold since i bought my car LOL i pay little attention to detail. cold air works a charm ;) just wear lots

of clothes if ur planning to go far

hey guys thx for the responses... i forgot and it is stupid of me for not stating that somehow my air-con doesn't work(maybe it needs a air-con regas, but let assume that air-con doesn't work at all ^_^) :/ haha i guess that explains how this debate popped up... and im pretty sure theres a few cars out there that has this problem to(i think) :thumbsup:

jvs007; i do have an r34... but i haven't edited my details hehe to lazy

A/C de-humidifys the air, thats the main point. If its cold, i chuck the climate control on about 24deg with A/C ON with the vents going to the windscreen, that works pretty quick. Cold A/C works a touch quicker.

  • 2 years later...

while warming up the car, hose the outside of the windows

set air con to OFF but allow it to flow the hot engine air through the feet vents and windscreen vent.

roll with windows slightly down(doesn't bother me as im a smoker)

rug up!

That's all i ever use the air con for.

I hate that No-Fog/Fog-X/Never Fog stuff, because it leaves an oily film on the windscreen that makes it look dirty and hazey in the sunlight... and if you wipe all of the oily stuff off, then you've just wiped off the product and it does sh1t-all!

I find just keeping the inside of the windscreen PERFECTLY clean and spotless is the best option. Then 10 seconds with a blast of hot air demists it quick as a flash! When your windscreen is dirty though, it takes AGES to demist the glass.

Absolutely agree with everything Merli said

Keep it very clean, and you are less likely to have the problem.

Also the RainEx AntiFog stuff is crap as mentioned, I put it on, then took it all off again, just became smeared everywhere.

It is also about keeping the inside of the car dry where possible. So leave umbrellas etc in the boot and anything else that is wet. I occasionally put a tub of those moisture absorbing things in the car overnight over a few days. It sucks up all the moisture in the air and converts it to water in a tub. You can buy it from the supermarket. It helps, especially when the air is very humid in the car, and moisture is attached to your carpet, seats etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Mate you saved be from dying in the Perth summer. AC wasn't changing direction and just going into diagnostics mode fixed it. You're a legend and I would shout you a beer if I could!
    • Unfortunately effort gone to waste, you will have substantial issues with how the manifold and wastegate have been integrated. You would be so much better off with a modified stock manifold like this: https://hypergearturbos.com/product/rb25detexgatedmanifold/   OR literally just getting a off the shelf Sinco or 6Boost manifold as myself and others have mentioned.  
    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
×
×
  • Create New...