Jump to content
SAU Community

A/c Back Light Glob Blown

ranicx

By ranicx,
in General Maintenance

 Share

Recommended Posts

ranicx Veteran

ranicx

Posted
Posted

well i was having problems with the buttons on my AC controls unit, and when i took it out, the thing practicly started to crumble in my hand. the plastic was all brittle and and only 2 of the 8 or so screws in the entire thing actualy held onto something. it looked like someone had droped kicked the thing..

anyone else have the same problem? or has someone realt droped kicked my A/C lol

anyway, getting to the point. there is 2 tiny globs in it that light up the buttons at night, and one of them has broken. they dont look like normal globs that you would be able to buy at repco or somthing.

does anyone know about where i could find these? or if i could find them at repco?

i realy need another one, its driving me nuts and its only been a few hours. i think if i cant find one, i might have to resort to retro fitting another globe, which i rather not do.

Link to comment
https://www.sau.com.au/forums/topic/124761-ac-back-light-glob-blown/
Share on other sites
ranicx Veteran

ranicx

Posted
  • Author
Posted

really?! theres another thread, haha.. cool. yeh i know how to put it in. i spent about an hour last night glueing my whole A/C unit back together because it was just falling apart for some reason .. got no idea why. has been like that since i got the car.

thanks heaps, ill have a search around for it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Ticking Sound On Idle - Rb25

      By MBS206 · Posted

      Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • WARLORD
      injectors top feed for sale

      By WARLORD · Posted

      Deatschwerks 1800cc sold
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • myrbgivesmeheadaches
      Ticking Sound On Idle - Rb25

      By myrbgivesmeheadaches · Posted

      Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
×
×
  • Create New...