Front 355mm Disc Brake

[tacker]

Ok would like to know if anyone in the forum has any knowledge on 2 piece brake rotor from any maker that fits a R32 GTR. I only need the rotors as i will use the standard calipers which i will have a bracket milled to fit.

Update i have found a company who make the 2 piece rotors for the R32,33,34 GTR skylines.

Why dont you have a look at their web site and let me know what you think. There is even a forum section on this subject with very quick replies to the questions i have asked so far.

regards

http://forums.racingbrake.com/viewforum.php?f=7

Edited July 3, 2006 by tacker

[gtrracer]

There are plenty of places that will do this for you.

In Melb call RacePace in Bayswater, Ben works on all sorts of Skylines and races R33 GTR.

If you go 355 mm disc you will be very locky to get it to fit in a 17' rim, only 1 or 2 types of rims will clear these, better to go to 18".

[9krpm]

tacker, how much will the rotor cost?

I've got a set of second hand F50 Brembo calipers with ?pagid pads and 355 mm rotors. Basically everything you need to bolt it into a nissan minus the mounting bracket. If you want them let me know.

[caz]

[

[Ronin 09]

the std GTR32 caliper will have too much curvature at the outer edge to fit a 355mm rotor...

plus it is very unlikely that even the slimmest caliper with a 355 will fit under a general 17"... something like a Volk TE37 has more space though

[tacker]

Not sure either thats why i am looking at every option.

I have 18" wheels so that wont be a problem i hope

the std GTR32 caliper will have too much curvature at the outer edge to fit a 355mm rotor...

plus it is very unlikely that even the slimmest caliper with a 355 will fit under a general 17"... something like a Volk TE37 has more space though

[t01-100]

send an email to [email protected] they have some new 355x32 two piece rotors they are clearing at the moment.