Jump to content
SAU Community

Recommended Posts

Ihave my 97 stagea for sale becasue im leaving over seas in a month and a half so it has to sell,

It has a t04 upmount turbo good for 400 horses with a 38ml external waste gate stainless steel manifold and 3inch dump pipe then goes back into it's normal exhaust. And has a hybrid intercooler plus the intake has been modified, dont as same as the gtr motors all work has been done by a turbo performance here on the gold coast.

will ship if needed to.

body and inside is perfect bas one tiny little dint on the front gaurd about 1cm big a part from that the car is in great nick.

goes great is running factory boost.

please call for info

tom 0409285451

price is around 17500 but it needs to go as i need to leave so u not what thats means

[email protected]

post-30310-1151989934.jpg

post-30310-1151990082.jpg

Edited by tomoy
Link to comment
https://www.sau.com.au/forums/topic/124831-nissan-stagea/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome!  Car sounds great, anypics ?
    • Welcome.  800hp should be a bit of weekend fun!
    • I'm going with "Just run two gates". Fix the problem conclusively. It's the only way you'd ever truly know, right?. This is all pretty much splitting hairs. Even the extreme example where it takes two whole seconds at 100kmh or something sounds monstrously dubious. And anyway, when you're punching the throttle when you 'need' this power, you aren't at 2800rpm in the wrong gear. Test it at 5600rpm in 3rd gear, when you're traction limited punching out of a sweeper. Much difference there when you account for traction?
    • And the full R32 GTR wiring diagrams are also freely available. Hmm.... there's supposed to be an auto replace that would have linked the thread. Here it is, manually  
    • Ahh...should have been clearer ~ there's 2 ... SMJ = super multi junction (connector)...   ...this is connector 6 & 25 in above image -- body harness to engine loom (6) & body harness to main loom (25) Headlights go to front via connector 6 ; fuel gauge goes to tank sender via connector 25  ...like I say this is R33 diagrams, but at a pinch R34 won't be too far different. *IF* the two ground faults are related, this can be the only place where both wires converge (as one runs to the back, the other to the front)... ....thing is, you probably need to establish if the faults are related (unless you examine that area and find obvious chaffing on the looms there to body ground)....*IF* the fuel gauge is still broken (full needle deflection), I'd be headed for the boot, remove fuel sender wire, key on and measure the voltage there ~ it should be roughly 10volts. If that's ok, check sender to ground resistance...if this is a dead short to ground (and there's fuel in it), then sender has failed or something funky has happened to wiring in the tank. edit: ahh...rereading the thread, this is R32....above fuel sender test still valid tho'
×
×
  • Create New...