Jump to content
SAU Community

Thermostatic Cooler Kits, Single/dual Filter Relocation Kits


Recommended Posts

Hey Dude,

Can the thermostat be used with other oil filter kits like the HKS R Type filter. It comes with the relocater kit and a core but no thermostat. Can this thermostat fit in with the dimensions of the other kit?

Thanks

Brendan

  • Replies 125
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hey Dude,

Can the thermostat be used with other oil filter kits like the HKS R Type filter. It comes with the relocater kit and a core but no thermostat. Can this thermostat fit in with the dimensions of the other kit?

Thanks

Brendan

Sure can :)

All you need to do is plug it in line and you're all set

It comes with fittings aswel

Hi N1GTR,

Had a look at the space left in the engine bay...not much.

Can you please post pictures and dimensions of single and dual filter setups. I'd like to see if I can fit either in what space I have before I commit.

Thanks and regards.

Hi N1GTR,

Had a look at the space left in the engine bay...not much.

Can you please post pictures and dimensions of single and dual filter setups. I'd like to see if I can fit either in what space I have before I commit.

Thanks and regards.

Hi

I dont have sizes for the filters, just have a look at the pic and then have a look at the size of your current filter as all the filters will be about the same size

You have a GTR? Then id suggest putting it either under the car, or in the space where the battery normally is on most cars(i know R33's have them in the boot)

So far no one who's bought one has taken pics and sent them to me, id do it for mine but my motor is in bits being rebuilt

:happy: Steve

just to confirm, if i get just the thermostat and core, it will all fit in and work.. i.e I dont want to relocate the filter.

Hi Suspense,

If you get those parts and dont want to relocate the filter, you wont be able to fit them as the filter has no where to be located on the lines. Have a look at the very last pic attached on post one, and it should be quite easy to understand what i mean

:D

Hi Steve-o, mate i'll grab a filter relocation kit with a cooler and thermostat, you know what i want mate. Virtually everything i need to relocate filter then to cooler via thermostat then back to motor.

Hi Steve-o, mate i'll grab a filter relocation kit with a cooler and thermostat, you know what i want mate. Virtually everything i need to relocate filter then to cooler via thermostat then back to motor.

No worries Adam

Ill PM you the different configurations you can choose from :D

  • 2 weeks later...

Hello Guys

I am the supplier for the thermostats here, i am having long delays with theses items from every supplier in Aus.

the cheapest replacment i have found was to be earls which want 167+gst each thermostat. which is far from a joke, i have around 8 coming in the next 2-3 weeks max, they were ment to be here sooner but have been delayed

i know is will make many ppl angry who have already ordered and paid and have been waiting for a while now i am very sorry for the delay and im doing everythign in my power to speed things up

Also if ANYONE can find a better priced Inline oil thermostat for under $120 each please contact me ASAP i will make it worth your while if you can find me 5 items here in AUS NOW which i can get my hands on to please these awaiting customers

you can contact me or steve via pm if you need any more info or help.

once again i am very sorry for the unexpected and uncontrolable delays

Do u have like any time frame when these kits are gonig to turn up? can u confirm when they left and when they should arrive even though its on sea freight surrely someone knows whats going on

hi N1 GTR

you have said that the kit comes with everything needed but how much length do you get with the hose?

do you get a box of pre-made pipes of varying lengths?

or does it come with one role of hose and fittings to be put on to your descression?

i ask because id like the whole kit but i think ill only be getting the relocation kit due to funds and would like to know how much length i would get. id like to be able to mount the filter flat near the battery in a r32 so it needs a fair bit of length in the pipes as other kits i have seen only come with about 30cm of pipes. id then like to mount the oil cooler and thermostat (purchased later) in front of the right hand wheel, basicly short lines from where the filter is to the cooler.

thanks for any help

damien

Mate I need the oil cooler kit my mechanic cant finish my car and has been waiting already 2 weeks for it

cant you send the kit off then the thermostat later when it arrives

Not happy at all ive had no confirmation or anything that my payment has been received either slack as

Do u have like any time frame when these kits are gonig to turn up? can u confirm when they left and when they should arrive even though its on sea freight surrely someone knows whats going on

Please read above, there has been an unexpected delay due to a shortage of supplies.

hi N1 GTR

you have said that the kit comes with everything needed but how much length do you get with the hose?

do you get a box of pre-made pipes of varying lengths?

or does it come with one role of hose and fittings to be put on to your descression?

i ask because id like the whole kit but i think ill only be getting the relocation kit due to funds and would like to know how much length i would get. id like to be able to mount the filter flat near the battery in a r32 so it needs a fair bit of length in the pipes as other kits i have seen only come with about 30cm of pipes. id then like to mount the oil cooler and thermostat (purchased later) in front of the right hand wheel, basicly short lines from where the filter is to the cooler.

thanks for any help

damien

Hi Damien, pm will be sent later today with all that info for you

Mate I need the oil cooler kit my mechanic cant finish my car and has been waiting already 2 weeks for it

cant you send the kit off then the thermostat later when it arrives

Not happy at all ive had no confirmation or anything that my payment has been received either slack as

Spandex can arrange this for you, ive emailed him and asked him to do so for you.

I confirmed the money was paid, and i have replied to EVERY one of your PM's.

Speak to spandex about this from now on, he's obviously the person you need to speak to.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Can you log IAT? Whilst WTA coolers have their place, doing any sort of sustained run is not one of them There are fixes that slow down the heat soak, like ice boxes, which don't last that long, and interchillers, which are fairly expensive, up grades to the WTA cooling radiator, which may require a bigger pump, and upgrades to the reservoir size,  and upgrades to the cooling fans, but, it all still heat soaks, and takes ages to come down in hot weather  For a turbo, that isn't locked into WTA like my PD blower is, can you not possibly swap to a nice air to air intercooler????, it would be better for sustained runs then, and have alot less things that could go wrong in my opinion 
    • So, the other thing I've sorted is a baseline dyno run up at Unigroup's new location. The auto trans was a little unco-operative by both shifting down when the throttle was floored on the dyno (so Mark had to ramp it up more slowly than in a manual) and also by shifting up at 6,000 even in sports mode instead of the indicated redline of 7,000 Still, on a hot day it made 240rwkw at 16psi which seems about right for 300kw (400hp) through an auto at the wheels.  The shape of the curve is not quite right because it was not full throttle to about 4,500 to stop it kicking down, but until I can get a tune on the auto trans control this was the best we could do.....full boost will be well below 5,000 once that is sorted, I'll get some data logs when I can to confirm For comparison, the R32 made 255 at 12psi (at 4,500) on the same dyno with tune, n1 turbos, cam gears, big exhaust but otherwise all standard so the v37 is likely a little better out of the box. One thing that is very clear is that the standard water to air intercoolers are not up to sustained use at full throttle in warm ambient temps. After about 5 runs (so only a few minutes full throttle), it was pulling boost and timing and dropping 10-15% power. Unfortunately I didn't get that printout and the Unigroup guys are away at the moment, will try and get hold of it on their return. So, looks like a healthy engine to start modifying and the only real area of concern is the w2a heat exchangers which the aftermarket has plenty of solutions for    
    • I maintain it actually looked really nice in person. So much so that I thought "No, this is illegal" but there it was, clear as day. I think we can easily call the wing and wheels/height to be transformative. Not saying it's better than the GR Whatever, or the 86, or the WRX STI or anything of that sort (the internet says it all bolts up so you can buy best of all worlds?) but it's still at least a thing and not nearly AS bad as people say.
    • That's less offensive than the previous gen.....except for all that ugly black tupperware around the edges. Blerck!
    • I leant out the window recently and took a picture of this new WRX. It looked real damn fine in person. It's faster around a track (stock) than a (stock) GR Yaris. It's much more practical despite being heavier. It's significantly cheaper. This gen tunes really well, much better than others. .... I think they're probably a lot better than people expect.
×
×
  • Create New...