Jump to content
SAU Community

Recommended Posts

These have been used for about a week or so and removed b'cos the softc*** said they were too hard....:bahaha:

gab1.JPG

gab2.JPG

gab3.JPG

gab4.JPG

gab5.JPG

It was pulled out and the seller (James) is chasing $3,700HKD (Hong Kong Dollars) shipped via EMS

His email is jc_333 at yahoo dot com

They were pulled from a 34GTT but the shocks' part numbers are for a 33GTR so will suit either.

EDIT: here are the details from him...

GAB REVOLUTION STROKE 2 (Height & Dampen Adjustable)

Front/4 steps and Rear/8 steps dampen adjustable coil

overs

Rear shocks (Short)

Lot #QE ?16-X

GKV9395A

KYB HE26

Front shocks (Long)

GKA9795

KYB HF12

springs are "sustec pro japan" aka Tanabe

EDIT2: We assume the springs are these :

http://www.rd-tanabe.com/english/sus/pro21...210/pro210.html

Sustec Pro 210

This is a direct roll type spring developed with merits as light weight and strong durability. The looseness of former direct roll type springs was a weak point, but new one is overcome with high tension steel material and Tanabe's knowledge. It corresponds not only for driving at circuits and winding drive, but also for comfortable general drive.

Link to comment
https://www.sau.com.au/forums/topic/12486-fs-gab-revolution-stroke-2/
Share on other sites

  • 2 weeks later...

oh ok. ya i have a photo but its at my comp at home. Ive seen a pic of your car it looks really good. I like the front bumper and the bonnet. My car is pretty much stock all i have is a pfc, xhaust, bleed valve, and filter. Nothing great am still trying to save and make some money hehehe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Your car was auto before? You have different diff ratio (auto vs manual i think? or n/a and turbo?)
    • +1 for getting a screen off alibaba, CarPlay/Android Auto is vastly better than whatever navigation cars had 10 years ago. I got an Android screen for my 2015 BMW, huge difference. Fully compatible with factory stuff including iDrive controls.
    • Yeah, my offer was more to show exactly how rough and ready the rig can be and still be useful. Youtube vids will definitely show cleaner setups. Same concept though.
    • I would guess the seal has gone down at the speedo drive and gearbox oil has crept up the drive cable sheath and fouled the speedo head.
    • Any updates on this? Although not a stroker, nor built especially loose, my car has the exact same symptoms. Although I feel they were not there to begin with. Since rebuild with forged parts I have done about 40k kms and it feels like during the last 15k or so, the oil consumption has gotten progressively worse.  Compression test showed - what I thought at least - similar 10-10.5bars in each hole without oil. I have not yet done blowby test though, due to limited garage access. #2 plug is the looks the most foul and that was the one with 10bars. Nothing in the breather tank. I only recently disabled PCV and left only the hoses running from the valve cover via smallish tank to turbo intake pipe there and did some mildish 2nd gear pulls so the car was definitely on boost (1.4bar or so). Removed a hose from the tank and it was basically dry - meaning, the wipe I used had basically no oil on it. Last time I checked, the turbo and IC piping seemed dry as well (will have to see about that again after those pulls). For the past year and a half though, the car has been driven like a granny would for 99.99% of the time, since it mainly serves the purpose of carrying the family around nowadays. A lot of slow, stop and go city driving and most of the trips it barely sees any boost, but gets up to temp properly every time. Although there can be weeks it is not started at all. The car does not smoke, or at least not that I can see. (CAT is in place though). There is slight visible sweating at the Ex cam cover seal and I recently tightened the oil cooler lines as there was some mist on them too. It runs and idles extremely nicely and feels all around healthy. Like TurboTapin, I too am suspicious of my turbo. I have had IC pipes pop out from 1.6-2bars of boost a half a dozen times during the years. The turbo is a HX35/40 hybrid. So, a very similar mystery. Around 1500kms and a litre of oil surely cannot disappear to thin air. Apologies for the wall of text, not sure if any of the above is useful for best guesses/things to check next.  
×
×
  • Create New...