Jump to content
SAU Community

Recommended Posts

I'll be entering into the world of auto > manual conversion shortly. Was eyeing off an S2 stagea at the wreckers that had been converted. I have about 2 weeks to do it in, but shouldnt take that long as all the bits I need are there already.

I'll post progress & pics once I've started.

Nooch

I'll be entering into the world of auto > manual conversion shortly. Was eyeing off an S2 stagea at the wreckers that had been converted. I have about 2 weeks to do it in, but shouldnt take that long as all the bits I need are there already.

I'll post progress & pics once I've started.

Nooch

With some help its a weekend job. Only special gear is something to cut the hole for the gear lever and a welder for the handbrake bracket.

With some help its a weekend job. Only special gear is something to cut the hole for the gear lever and a welder for the handbrake bracket.

Thanks Bob,

yeah I should be ok. Only thing that will slow me down is I'm a bit limited by my mobility as I'm not fully recovered from an earlier accident.

I did print out all the info on the conversion + a few additionals that people had thrown in.

Slowly all my pieces are coming together, I cannot seem to spend money on one consistent goal, I am all over the place, I've got most of the parts I need for power, Then I got a 32 GTR box (bargain, couldn't resist), Now i've started buying more parts for my stereo, just got a bunch of gauges, I guess it doesn't really matter what order I buy stuff in because everything will be done in one go, no point doing one bit, then another in a few months haha.

I am interested to see what people have done with their auto consoles, I am Most likely going to just modify mine and make it work, are there much pics going around of modified auto consoles that anyone wants to share? Not fond of spending the kind of money needed for a proper manual console....

Hello fellow stag owners,

i bought a factory RWD stagea RS series 2 and its auto :angry: anyway ive got a r33 gtst gearbox sitting at my mates house and Im just wondering if it would be a direct bolt up job or do i need another gearbox? im not sure if its a series 1 or 2 gearbox.

ok thanks!

i havnt seen any forums for the factory RWD manual conversion so i thought i would ask. im running a haltech sp2000 ecu and ive got a r33 tailshaft and spigot so it should be all good! just have to gather all the other bits

Well I decided to let the guys at Top Secret handle this job for me and deal with the heat too. Theyll take care of the install of the box, pedles& handbrake. I could have done it all but its nice to know you have some sort of warranty on the install. Once this is sorted its off to get the zorst sorted.

Happy days

  • 2 weeks later...

Can anyone clear up a bit of confusion over the flywheel for me. Got a 96 Stagea RS4 and looking at putting the r33 gtr box in. The guide says to use a 9 bolt style flywheel, but when helping a friend rebuilding a rb25det for his skyline yesterday I noticed that theres only 6 bolt holes for the flywheel. Looking at getting a lightened wheel so don't want to shell out a load for one that won't fit.

All RB flywheels have 6 bolts holding them to the crank - the difference is in the number of bolts holding the clutch cover (pressure plate) on. To quote Kudos Motorsport:

All R31/32/33 RB20/25/26 cranks use a 6 bolt flywheel to crank configuration, and the following pressure plate to flywheel:

•RB20E, RB20ET & RB20DE (225mm Clutch Disc) - 6 Bolt

•RB25DE & RB25DET (240mm Clutch Disc) - 9 Bolt

•R32 RB26DETT (240mm Clutch Disc) - 9 Bolt

•R33 RB26DETT (250mm Clutch Disc) - 9 Bolt

For starters awesome thread!!!

Doing manual swap soon gathering parts..

-What clutch should be used??

Im running it in rwd only... R32gtr box would a heavy duty organic listed for a r32 gtr work well? Thanks

-also r34 manual console work or not??

Thanks rob

  • 2 weeks later...

1st up awesome thread!!!

started mine manual s1 swap today.. my contributions to the the thread:

-r33 clutch pedal is good fit BUT hole to bolt up to dash does not line up. r33 has 1 hole stagea has 2 holes... i cut and weld the bracket off the handbrake pedal.. otherwise two bolts taking pressures off the firewall..(very thin) not good idea

-r33 hand brake and cable PERFECT (besides mounting holes)

swap is on pause ordered a r32 push clutch, box turned out to be r32-3 pull but its goin well printed conversion guide out and reading it like a bible!!! thank you so much :)

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Coming home late at night and driving past the police is the only reason i need one haha And yeh, definitley needs a switch to quickly enable it, dont have time to be getting my phone, opening an app, waiting for it to update etc before being able to make the change
    • Because it is financially convenient for them lol. Why wouldn't they want to give you the lowest possible valuation for your car?
    • Yep. @Duncan also shannons they will rip you dry and will be probably limited on how much you can drive. Also keep in mind that you always have to have it garaged with Shannons, with enthusiasts as per their PDS you can have it 2 times per week on the driveway for example. 
    • I had a generic 4" Varex rear box on my old V8, worked a treat for sneaking home late at night, it was as quite as stock when closed The car was "fairly" loud when open as it consisted of 1" 7/8 headers to 3" catted Y pipe, to 4" single, it did have a resonator in the mid pipe and only the Varex out the back I also hard wired in a Varex dash mount switch, as the key fob thing is a pain to use when driving I wouldn't recommend giving the beans when it is closed though as it creates a large restriction in the exhaust  It also can in very handy when pulled over for "random" breath tests or just cruising past the constabulary   
    • Here is the before and after of the scraping/sanding of the IC pads on the tachometer board for the fix mentioned in this thread. And yes it worked fine after. Just a note if you change any components on the board the tach calibration can be wrong showing the wrong idle etc...only problem is once it is installed back in the cluster you can't get to it to adjust...ouch! My fix was to cut out the calibration pot (the blue one) from the board and run it with two wires to the fuse panel under the dash where I could adjust the idle calibration once everything was installed. And yes I soldered everything up again including the half soldered components either side of the IC in my photos                                
×
×
  • Create New...