Jump to content
SAU Community

Recommended Posts

  • Replies 351
  • Created
  • Last Reply

Top Posters In This Topic

If you have an L2S you don't need the wakefield licence so there is $40 saved for those who didn't realise.

I understand you are keeping the creek for the mexicans but I'd love to mix it if you have the room still closer to the day. Also be in for the Wakefield day. 1:12 flat with auto, any GTR's that don't beat it forfeit their cars to me.

Ps, I'll be running quicker than that by the time this rocks around.

People from Syd who feel they have to be mentioned smile.gif

fatz

Dunkan

Abo Bob

N1GTR

Moanie

Liz

Corinne

John

Just noticed that^^^ - hahaha

anyway, we have 9 confirmed for the wakefield day, that makes 30 so there is a possibility of hiring it i guess

Snowman - check the exec thread when you get a chance? cheers mate

BTW - it seems that if you have a CAMS L2S you don't need a Wakefield license. Thats what the Syd boys have told me today - although I had to get one last time so I'm confused.

Hey man nah its right, L2S overrides the wakie licence.

Well when I was there like a few months ago I didnt need to get the wakie licence as I had the L2S.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • https://www.youtube.com/watch?v=KyZDvZmvhik
    • You'd be better off digging a pit and standing under it to shoot it.
    • The easiest way would to be ignore the oscilloscope, grab a multimeter, and make sure all the main connections are right. An oscilloscope will give 99.9% of even technicians so much grief, as they have no idea what things should even look like on an oscilloscope. Which is also even more likely for someone who's first ever major work on a car is this If the battery volts are dropping down so low, the LDV will reboot the ECU, when it does so, it will drop out the start circuit. If this is occuring, the battery voltage should also come back up. Give it a few tests, even simple ones like when you're attempting to crank it, measure voltage from the engine block, to the negative terminal. You might find you've got really bad connections somewhere. My guess is the "new" motor has something like a shit starter motor, at which point, you can swap the starter motor from the old motor, to the new motor. Before I did any of the above though, I'd 100% confirm the battery in the vehicle. Most jumper packs are absolutely useless, especially if a battery has a bad cell for example. Also the new modern "jump packs" if you don't know what you're doing with them, you won't even get them into high current stage. So go back to basics, check the battery, especially with a known good one as a replacement test. Check ALL the wiring, this includes where they're bolted onto the battery, and bolted onto the starter motor. Check all the earth straps are on. Measure your resistances across your earth straps. A good check here is to measure voltage across the earth straps while you're trying to crank it. If you're seeing voltage, you've got high resistance joints! Oh, and once you've done the above, check the battery over again.
    • For most rotisseries, as Duncan has mentioned, you really don't want a full car on it, you want a stripped shell. And imagine how many more weeks THAT is going to add to working on the car...
×
×
  • Create New...