Engine, Brakes, Wheels...

[Pva_Glue]

Welcome to N/A Skyline section...

You will find most of infomation you need @ http://www.meggala.com/main.htm

If you can not able to find what you need please use this section as gain infomation or please share you ideas.

also Please use SEARCH button before you make a thred.

Thank you all

cheers

Joe

[Pva_Glue]

I know DBA have 4 stud disk rotors avaliable now

I don't know about the code of rotor. anyone know? if DBA released it?

for N/A Skylines you can use following Brake Pads

Bendix;

FRONT:DB 1308BS

Rear : DB 1144BS

Endless Pads

Front TD 148B

Rear TD136B

These were my old Endless pads, they are awesome stopping in any condition HOT or COLD. but it eats away Rotors and Creats bad Black Dust!

cheers

Joe

[SupaFly Skyline]

I've got R32 RB20, wheels and brakes are same as, silvia 2lt turbo.

are the dba rotors bigger diameter, do u know?

[Nismodified]

ve got a r33.

standard wheels are 205's R15

and basically measured 6.5inches wide

now, ive got 215's R17, and from the tape measure they should read 8 inchs across....yeh i found 17x8's in four stud and the wheels arent too ugly.

thing that stumped me was that, my stock and current wheels are the same width when physically lined up.

i realised the RIm on the stock was 6.5, and the tyre on it bulged out more then the rim itself, yeh the tyre was inflated properly....

that ends my stupid post for today.

[NS2500]

Nismodified, have you got a pic of the wheels? I searched every shop for weeks and ended up giving up. The selection for NA skylines is just so poor.

Maybe 5-studs are the only way for me?

[Pva_Glue]

If you are looking for the 4 stud skylines wheels

try ROH http://www.ROH.com.au

[NS2500]

There was only one ROH wheel that would fit my car apparently and it was one of those 3-piece wheels, which I don't particularly fancy.

Every shop said that the wheels wouldn't clear the calipers. I was after the Adrenalins but then I noticed everyone else already had them so it didn't matter...

[Nismodified]

ok

[Nismodified]

another shot, may be bigger or small, not sure.

also has some of that really weird jap mission statment things on one of the spokes.

there also dirty like hell in the pic

[Nismodified]

Just replaced my brake pads with bendix premiums and machined the disc down to a shiny finish.

Compared to the pad when i first had the car, the bendix dont have a sudden and sharp bite, but seem to do an okay job so far. Im still in the process of wearing the pads in a bit. They smell a abit though.

[Pva_Glue]

here was my wheel 17" ROH on my old car 4 stud

[Darker]

"Blade" if Im not mistaken? have the same in shadow chrome, thankfully they're not too common

[NS2500]

Where did you guys buy your wheels? Everyone I went to (Beaurepaires, Tyrepower, Bob Jane) said that the wheels wouldn't clear the front calipers.

[Darker]

They what now? I went to Bob Jane, first and last. When I started, the guy didnt know for sure, so he called ROH and asked.

Even checked on stock levels, and I had my wheels that day fitted. They miss the calipers by a clear inch in any direction.

Might pay to talk to the wheel guys direct if you can

[EMZ R33]

Hi guys and girls, i got a mint set of 4 stud tyres from Speed dreamz (not in operation anymore) for my R33 N/A. They came from tempe tyres in sysdney (i think) and they in turn got them from USA. Im positive that the stud pattern was created here in adelaide......or sydney as they stuffed up the alignment initially and said they had to go back for re-drilling. Whole process from asking to buy the rims to having them on my car (correctly) took about 2 months. So long story short if your happy to wait a while there is decent range out there if you just ask.

Kind regards, Evan

[unarmed_skyline]

very old post mate check the date,

[Eug]

way to bump up an old thread.

alot more rim varities in the 4x114.3 pattern now.

[inthisglass]

Woah back from 03!

i was going to get a set of deep Dish ones i liked from tempe but somebody said somewhere that they are of crap quality and are heavy.. anyone want to share their opinions? or a good japanese wheel site that do the 4 stud rims?

[GTS4WD]

dont know about 4 studs..

But GTR's are a cheap light and wider alturnative..

Plus the offset make the car sexyier!

Edited November 28, 2007 by GTS4WD

[R33 Ribby]

hey i got n/a 33 and i was wondering what size are the brake rotors. just wanted to know beacuse there was a group buy on new rotors but i dont know how big my stockos are in the first place any help would be sweet

cheers