Jump to content
SAU Community

Recommended Posts

hey fellas,

i'm buying a modified r32 gtst soon and was wondering the requirements needed to pass for a RWC?

Engine Mods were: Custom Garrett 500HP Ball Bearing Turbo, Braided Oil and Water lines, Bosch 044 Fuel Pump, Bosch 555cc injectors, Custom Fuel Rail, Malpassi Rising Rate fuel regulator, HKS Air Pod, HKS Heavy duty actuator Valve, 3inch turbo back exhaust with Dual chamber dump pipe, Microtech LT10s computer

Apexi AVCR, stainless steel intake pipe, Hybrid Front mount intercooler, Catch Can, Exedy Heavy duty organic clutch, Lightened flywheel

Other mods: Phillips XENON headlight kit, Sony XPLOD Head Unit, Blitz Turbo Timer, Blitz Boost Gauge, Razo Gear Knob, Nismo Short Shift Kit, Momo Steering Wheel, new tyres

What modifications do they usually check for a RWC, how long does it take for the checkup and also the price to get a RWC done?

thanks

Link to comment
https://www.sau.com.au/forums/topic/125264-requirements-for-a-rwc/
Share on other sites

From what I can see, illegal modifications are:

Pod filter + FMIC combo, aftermarket ECU, boost controller, catch can if it vents to atmosphere.

I'll assume the Philips headlight kit complies to ADR standards so that will pass.

The boost guage might be a problem if it's mounted on the A-pillar, so will the steering wheel if any part of it is highly reflective (ie. chrome) and distracts your vision (ie. glare). Also make sure because you don't have the stock gear stick knob, that you have a sticker to indicate your gear patterns.

Apart from checking the basics such as lights, wipers, etc, they will usually check your suspension and steering bushes under the car as well, so make sure steering boots or whatever aren't cracked and so forth. They will also check for exhaust leaks and if your engine and gearbox mounts are still in good condition.

Someone else might have more information for you.

You'd be better off talking to the place thats going to do your WRC

there is such a large inconsistency with the application of the regulations that one place will pass things another wont, but pick on stuff that really shouldnt be

hey fellas,

i'm buying a modified r32 gtst soon and was wondering the requirements needed to pass for a RWC?

Strictly speaking whoever you are buying it from is supposed to supply the RWC. This can be a negotiation point, but at least make the purchase conditional on an initial RWC inspection.

i had to do organise the rwc on my r33 when i got it. it failed the first time for:

wiper blades

split muffler

rear seat not secure

compliance plate covered

wing not secure

and i have on it

atmo bov

dual stage boost controller

2 guages on a pillar

pod and fmic combo

depend where you take it really...

thanks for that guys, appreciate it.

Hey there, >_<

A roadworthy is a test of the cars ability to be driven safely...

So...brakes,tyres,wipers,lights,seat belts ,windsreen,horn,shocks,excessive oils leaks,holes in the muffler or smoke out of the rear end are basically what they look at....its not an epa test

I am a mech, and work at a roady specialist.

Most things are checked to be secured and present; ie emissions gear to appear to be present; cat, stovepipe, charcoal canister etc.

All loose items; sub, stereo etc, are to be secure, as it the battery.

They largely look at leaks, bushes, ball joints, unis, tyres, brake pads, disc rotor thickness etc.

thanks for the replies everyone. I was also wondering an estimate of how much a RWC will set me back, considering the mods?

Also, does anyone know of a mechanic that can take a look at the car on wednesday, around the Lilydale area?

cheers, miguel

Edited by Race Bred
thanks for the replies everyone. I was also wondering an estimate of how much a RWC will set me back, considering the mods?

Also, does anyone know of a mechanic that can take a look at the car on wednesday, around the Lilydale area?

cheers, miguel

The costs all depend on all the above items mentioned and there costs...ie tyres brakes windscreen etc might all need to be replaced

After the roadworthy you get a paper listing your problems and off you go to fix them

The cost of the roadworthy if i recall is about $70 but the cost to you depend on all the faults.

I believe you are given two weeks to fix them and return back to the place to re-inspect and stamp

the paper work.

Once the dates expire you need to pay the $70 again.

You might be pleasently surprised or dumbfounded on the faults and the money you need to spend to get it roadworthy.

Good Luck

Edited by 700HP-GTR33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If I had "perfect R33 GTR" kinda money I would have bought one of the crazy expensive low mileage HJA cars, but I am sadly not that wealthy. I already picked this car out of various Skylines for sale locally, most of which were worse in some way. Only a few cars were actually better but also more expensive. In terms of buying a motor locally, I at least have the option to inspect it myself and juding the seller as a person, and used or freshly rebuilt engines that some people sell are actually ok price-wise. I knew the car was going to require work, but shit piled up real fast and I haven't even driven 1000km yet as the turbo started oiling like a bitch within a few weeks after I got the car.   I assume it wasn't actually me who cracked it, though there is no way to know when that crack formed and if the previous owner even knew it was there. Buying another 05U Block can be a gamble, yeah, but the cheapest PRP cast block is like twice or more money-wise, and billet is 3 or 3 times as much. For now I am most likely just keeping the current engine, as a rebuild or engine swap isn't happening right now. But I am seriously considering buying a second engine and selling mine in return. Might be a sweet deal at the end.
    • Hi all. I need some help buying the correct size banjo bolts for my 2860 turbos. Because whoever installed them tore up the original part, I ordered new ones of this kind, because I just figured these were the most leak-resistant option as I already had trouble with a shitty braided line. I need to know the thread size of the smaller left hole, that is the turbo oil feed connection. I found out so far that the turbo oil inlet apparently has a 7/16"-24 thread, but I cannot find any listing or description of the thread size on this line. I do not have the original bolts. I tried using the bolts that were in the turbos (the ones that were mounted with the shitty braided line) but they sit very loosely so they can't be the right thread. Means either these bolts are the wrong ones (how do they fit the turbo then? no clue) or the wraparound-lines have a different thread than the turbo oil feed itself. Help is appreciated, asking Nissan directly is obviously not going to work.
    • EDIT: PSA to whoever stumbles upon this thread. It is in fact a crack in the block that caused this concern. Just letting you know. In my case, a few cm long hairline crack going horizontally above the turbo oil feed. Classic RB shit I guess
    • Might as well pop in some cams, head gasket, head studs, and a flex sensor. Full send.
    • Yeah I spent close to a year finding one. I was even tempted to buy a RB25DE N/A head and port it out. That latter option, could still be an option.
×
×
  • Create New...