Jump to content
SAU Community

Recommended Posts

hey fellas,

i'm buying a modified r32 gtst soon and was wondering the requirements needed to pass for a RWC?

Engine Mods were: Custom Garrett 500HP Ball Bearing Turbo, Braided Oil and Water lines, Bosch 044 Fuel Pump, Bosch 555cc injectors, Custom Fuel Rail, Malpassi Rising Rate fuel regulator, HKS Air Pod, HKS Heavy duty actuator Valve, 3inch turbo back exhaust with Dual chamber dump pipe, Microtech LT10s computer

Apexi AVCR, stainless steel intake pipe, Hybrid Front mount intercooler, Catch Can, Exedy Heavy duty organic clutch, Lightened flywheel

Other mods: Phillips XENON headlight kit, Sony XPLOD Head Unit, Blitz Turbo Timer, Blitz Boost Gauge, Razo Gear Knob, Nismo Short Shift Kit, Momo Steering Wheel, new tyres

What modifications do they usually check for a RWC, how long does it take for the checkup and also the price to get a RWC done?

thanks

Link to comment
https://www.sau.com.au/forums/topic/125264-requirements-for-a-rwc/
Share on other sites

From what I can see, illegal modifications are:

Pod filter + FMIC combo, aftermarket ECU, boost controller, catch can if it vents to atmosphere.

I'll assume the Philips headlight kit complies to ADR standards so that will pass.

The boost guage might be a problem if it's mounted on the A-pillar, so will the steering wheel if any part of it is highly reflective (ie. chrome) and distracts your vision (ie. glare). Also make sure because you don't have the stock gear stick knob, that you have a sticker to indicate your gear patterns.

Apart from checking the basics such as lights, wipers, etc, they will usually check your suspension and steering bushes under the car as well, so make sure steering boots or whatever aren't cracked and so forth. They will also check for exhaust leaks and if your engine and gearbox mounts are still in good condition.

Someone else might have more information for you.

You'd be better off talking to the place thats going to do your WRC

there is such a large inconsistency with the application of the regulations that one place will pass things another wont, but pick on stuff that really shouldnt be

hey fellas,

i'm buying a modified r32 gtst soon and was wondering the requirements needed to pass for a RWC?

Strictly speaking whoever you are buying it from is supposed to supply the RWC. This can be a negotiation point, but at least make the purchase conditional on an initial RWC inspection.

i had to do organise the rwc on my r33 when i got it. it failed the first time for:

wiper blades

split muffler

rear seat not secure

compliance plate covered

wing not secure

and i have on it

atmo bov

dual stage boost controller

2 guages on a pillar

pod and fmic combo

depend where you take it really...

thanks for that guys, appreciate it.

Hey there, >_<

A roadworthy is a test of the cars ability to be driven safely...

So...brakes,tyres,wipers,lights,seat belts ,windsreen,horn,shocks,excessive oils leaks,holes in the muffler or smoke out of the rear end are basically what they look at....its not an epa test

I am a mech, and work at a roady specialist.

Most things are checked to be secured and present; ie emissions gear to appear to be present; cat, stovepipe, charcoal canister etc.

All loose items; sub, stereo etc, are to be secure, as it the battery.

They largely look at leaks, bushes, ball joints, unis, tyres, brake pads, disc rotor thickness etc.

thanks for the replies everyone. I was also wondering an estimate of how much a RWC will set me back, considering the mods?

Also, does anyone know of a mechanic that can take a look at the car on wednesday, around the Lilydale area?

cheers, miguel

Edited by Race Bred
thanks for the replies everyone. I was also wondering an estimate of how much a RWC will set me back, considering the mods?

Also, does anyone know of a mechanic that can take a look at the car on wednesday, around the Lilydale area?

cheers, miguel

The costs all depend on all the above items mentioned and there costs...ie tyres brakes windscreen etc might all need to be replaced

After the roadworthy you get a paper listing your problems and off you go to fix them

The cost of the roadworthy if i recall is about $70 but the cost to you depend on all the faults.

I believe you are given two weeks to fix them and return back to the place to re-inspect and stamp

the paper work.

Once the dates expire you need to pay the $70 again.

You might be pleasently surprised or dumbfounded on the faults and the money you need to spend to get it roadworthy.

Good Luck

Edited by 700HP-GTR33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
×
×
  • Create New...