Jump to content
SAU Community

Recommended Posts

2.5 models will be able to be landed for the same price as v35 sedans low 20's it will be more expensive for the 3.5 6 speed manuals as alex says probably between 30 to 40k

it would make a great family cruiser me thinks my grandparents are looking at one

have a go at the camber on those rear wheels... drift camber. a 5k launch would leave to blck mark for 30m - but each one would be about 2 inches wide... and youd be seein more canvas than a circus tent.

I am looking at M35's now but the manual ones will end up costing more around the 40-50 mark compared to a 260rs being 30-40 (on road for both)

M35 is definatly hotter and id get free compliance here in Melbourne, but still...

My mate might bring in a Legnum and cop free compliance too from a workshop ive spoken to.

I am looking at M35's now but the manual ones will end up costing more around the 40-50 mark compared to a 260rs being 30-40 (on road for both)

M35 is definatly hotter and id get free compliance here in Melbourne, but still...

My mate might bring in a Legnum and cop free compliance too from a workshop ive spoken to.

i seond cruiseliner to go for a 260rs anyday over the m35. You have to remember M35 is a NA engine same engine that the Z uses. 3.5ltr drinks a bit as well. And theres not much mod you can do to a M35 other than the nismo tunes one. Apprently theres M35 in Oz already in carsales or carpoint. I saw it when i was searching for a 260rs. From memory its a gold color one selling at 50k.

Yes it does come out in a single turbo VQ25DET with a 6sp manual trans, mmMMmmMMmmMMmmm not bad!

I wonder if AUTech are going to make a 260/M35 version....? With all the bits bolting on to the M35 that bolt onto a 300ZX I doubt it would be hard to whack another turbo on and put a tough drivetrain in.....

Yes it does come out in a single turbo VQ25DET with a 6sp manual trans, mmMMmmMMmmMMmmm not bad!

I wonder if AUTech are going to make a 260/M35 version....? With all the bits bolting on to the M35 that bolt onto a 300ZX I doubt it would be hard to whack another turbo on and put a tough drivetrain in.....

huhuhuhu!!!!!! I can feel 360Rs in the air!!!

:)

So the only way to get one of these into the country at the moment is through a private import right?

Or has someone got a low volume licence for them?

Considering that one in NZ is only about $13000 AUD you must be able to get a manual 2.5T for under 20K So landed that would be about $25K right???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • AFM looks to be a z32 The injectors maybe old Nismo 555cc The turbo tag when looked up seems to be a gt2871 , imagine it would have the bigger rear housing .82 all look like the mid 00's mods when he started building it up. Vac hose seems right but would need to see a diagram. Great work going up there and sorting it out, be a good club car for someone wanting a good reliable rig.  I know I would like to have it but no space and too many other race cars at the moment.
    • Heys guys I got a r32 gtst speedo is out by 10kph seems the faster I go the more it be out  just seeing if anyone else had to problem and knows how to fix it 
    • I can't agree. If we hadn't all been brought up with the noise caused by the inefficiency of an ICE, no-one would actually ask for all that. An EV is like any other car, it just goes better. 
    • 2 more things I have to work out Easy one first...can anyone describe how to pull the fuel pump and sender from a 33? I can feel there is some sort of mount and clips but don't have a manual and don't know the trick......if not I'll spend some quality time in the boot witha lighter tomorrow. Second question is harder.  He had changed the upper plenum to a plazmaman but clearly got to a point with the vacuum hoses where he said "f**k it, I'm going inside for a beer" and never came back to that job because it was a mess. Am I right to think that I need: 1. Pre throttle (16mm nipple on inlet) to AAC's main 20mm fitting as the main pre throttle feed 2. ACC has a second 13m outlet joined to that 20mm fitting which I think is the pre throttle air supply for the cold start valve? 3. Cold start valve's outlet fitting then goes to Plenum (to bypass throttle?) There is some adapter on the back of the ACC with 2 fittings (13mm and 10mm), do I run the 10mm through a 1 way valve to the Brake Booster (4) and the 13mm back to a 13mm nipple on the Plenum as the Idle control (5)? 6. Run a 6mm vacuum line from the Turbosmart BOV to the Plenum? 7. Run a 5mm vacuum line from the Fuel Pressure Reg to the Plenum? 8. Run a 5mm vacuum line from the Turbosmart Boost controller to the Plenum? (Wastegate already has a pre turbo pressure source running to the solenoid then the wastegate on the other side of the bay)  Any help appreciated, the GTR is quite different setup and while the Stagea also has FFP it is different again. (And no Dose, I'm not pissing it all off and putting a ethrottle on it....)
    • OK, onto some questions to try and speed up the process a little. Does anyone know what core this Garret is? I know it is a high flowed standard turbo but nothing else about it. Tag says OK 0169J - 446179-5032 Same question for the injectors, I don't know what they flow and ideally can work it out before it hits the dyno, they are a mustard yellow side feed
×
×
  • Create New...