Jump to content
SAU Community

Recommended Posts

hey ppls

in the last few weeks ive noticed when i take my foot off/put my foot on the clutch it makes a loud squeeking noise..

At first i sprayed some WD40 stuff on the spring thingy that connects to the clutch pedal and all the parts that go along with it inside the car.. That fixed the problem completely for a day or 2.

Then it came back so i decided to carefull spray grease on the diff areas to see exactly what was making the squeeking noise... ive ended up spraying everything again in heaps of WD40 stuff and its stll making the noise :) Im pretty sure its coming from outside the car now.

i did a search for 'squeek' and 'squeak' :) but didnt come up with any results for the clutch, so any help would be great pls cause im not in the mood to pay a workshop to fix the problem just yet as i had a new clutch put in recently about 2 months ago, and i've only done like 1500km or so if that makes any differance... But like i said the noise only started happening the last couple of weeks.

I barely evan drive my car these days but seem to be getting more issues then when i used to drive it heaps :)

Link to comment
https://www.sau.com.au/forums/topic/125290-clutch-pedal-squeek/
Share on other sites

also i dont no if this is relevant but since i had my new clutch installed (clutch, pressure plate, and bearing) its had this rattling noise which stops when the clutch is pressed. A few people have told me its the clutch fork rattling due to the clutch not being installed 1000% correctly or something ?

never mind ppls... after an hour of searching for something totaly irrelevant i came up with what i was after :)

http://www.skylinesaustralia.com/forums/in...=118831&hl=

i did what it said though and lubed up the clutch fork with some grease on a stick to get it in there real good... didnt do squat however :)

I sprayed under the dash about 5 times... a month apart each time... now it's been OK for 3 months... so I dunno... it was definately under the dash for me.

As for the rattle... mine does it. I heard that it means "your box is old and worn". lol. I've had a new clutch, carrier bearing, carrier, spigot, pivot blah blah blah... all changed.

Yer... I was using silicone spray, which should stay there longer, but I really think it needs grease.

I didn't know exactly where it was coming from, so I didn't grease anything up.

If I could push the clutch with my hand, I could have probably pinpointed the noise with my head under the dash or something. Even if you drop the clutch slave cylinder off the box, I don't think you would get the noise, because it seems to need load on the pedal to do it.

hmm i just put like handfuls and handfuls on grease everywhere that could be making the noise..still made the noise... went for a 20 min drive... cursed for a bit cause i figured it still wasnt fixed... turned down the radio and the squeek seems to have gone :)

Im sure it will no doubt be back in the next 15 mins but im pleased for now atleast :)

LOL... well, I think it's better if you can get someone sitting in the passenger seat to push the pedal for you (over the centre console, so they're not in your way), while your head and hand is under the dash greasing up the clutch-rod and spring.

I sprayed on the last occasion, and then kept pumping the clutch about 20 times. It went away.

Common problem.. yet no solution.. PAIN IN THE ASS.. mine comes and goes.. no idea..

my clutch makes a squeekn noise 2, but im pretty sure its the slave cylinder i had my sister sitting in the car presing the clutch in/out and hy head under the car its deffentley comming from the slave or what its pushing against.

The thing I found that works really well is Motorcycle Chain Lube. Get one of those little extention tube things ( that usually are stuck in the lid of the degreaser cans ) to get some reach. It sprays on as a foam, and then quickly liquifies and runs into all the little nooks and crannys. Once it soaks in, give it a bit more and then run the pedal through it's paces.

WARNING !! Chain Lube is mega sticky stuff ( has to be to stay on a bike chain at a zillion revs ) so put some old towels all around the footwell area so none gets on your carpet and cover your pedal pads.

i know my squeak is coming from either the pivot bolt (in the gearbox) or the slave cylinder. been too lazy to fix it. i know its definately under the car as its much louder in maccas drive thru. another cause can be the spring on the clutch fork where it goes onto the throw out bearing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’d love to find some where that can recover the dashes to look brand new and original. Mine has a very slight bubble, nothing compared to come I’ve seen though 
    • $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
×
×
  • Create New...