Help Re: Hub Bearings

[88silhouette]

gday

have hr31 coupe.

have found z31 5 stud rear hubs (direct swap for the shitty hr31 4 studs)

anyway, need to get some bearings for them. got to be z31 bearings (the hr31 bearings pose problems with fitting the hubs etc)

nissan spare parts were no help, nor were automotive shops that i went to

nissan spare parts told me not to come back until i had a z31 vin etc

unfortunately i dont know anyone with a z31 with irs rear end (gotta be irs, not live)

anyway, this picture from FAST shows some numbers

failing this, i'm considering giving the hubs to a workshop to source and put on the bearings for me

any advice re part #'sm or suggestions for workshops in sydney (preferably south west area) that can do this for me, would be much appreciated

cheers, mark

Edited July 8, 2006 by 88silhouette

[SteveL]

Well according to FAST the PN's for the bearings are:

Outer: 43215-01P00, which has been superceded by 43215-19P00

Inner: 43210-21000

These are for a Z31 turbo, whether they will fit your R31 arms is another matter.....IOW, don't blame me.

Suggest you take these PN's to a bearing specialist as they have catalogues that cross-reference manufacturers spare part number with standard bearing ID's.

[88silhouette]

Well according to FAST the PN's for the bearings are:

Outer: 43215-01P00, which has been superceded by 43215-19P00

Inner: 43210-21000

These are for a Z31 turbo, whether they will fit your R31 arms is another matter.....IOW, don't blame me.

Suggest you take these PN's to a bearing specialist as they have catalogues that cross-reference manufacturers spare part number with standard bearing ID's.

cheers for that mate

anyone recommend bearings specialist for the job in sydney?

[Angry]

just FYI for steveL here ....... Z31 5stud rear hubs have been used in HR31s for MANY a conversion........ the R31house machined hubs which are about 750 a pair ..... hands down make the Z31 a cheaper option if u can find the c**ts.