Jump to content
SAU Community

Recommended Posts

I have a r33 running 13 to 14 psi with stock turbo using premium unleaded and was wondering if under flat accelaration is it unavoidable to get some pinging which i know is very bad. I also notice some black smoke from exhaust which ive been told is unburnt fuel due to the pinging. Is this correct and what can i do to stop damage to engine. thanks dean

Link to comment
https://www.sau.com.au/forums/topic/125411-pinging/
Share on other sites

How about turn the boost down.

You have not said anything about an aftermarket front mounted intercooler, or anything about aftermarket computer.

That black smoke you see means you are running rich which means it hasn’t been tuned to run that sort of boost/air flow.

Turn it back down to about 10psi for now until you have sorted out some form of cooling and tuning.

Link to comment
https://www.sau.com.au/forums/topic/125411-pinging/#findComment-2318608
Share on other sites

How about turn the boost down.

You have not said anything about an aftermarket front mounted intercooler, or anything about aftermarket computer.

That black smoke you see means you are running rich which means it hasn’t been tuned to run that sort of boost/air flow.

Turn it back down to about 10psi for now until you have sorted out some form of cooling and tuning.

thanks for that, I am running standard ecu and do have a front mount.

Link to comment
https://www.sau.com.au/forums/topic/125411-pinging/#findComment-2319971
Share on other sites

its nenver "normal" to get pinging

that black smoke is NORMAL and is due to the stock ECU running quite rich

it could be

- problem with the timing - check the bast timing using a timing light

- runnign too much boost

- too rich (even mroe than stock)

- spark plug problem

- coil problem

get it checked out by a mechanic on the dyno mate

Link to comment
https://www.sau.com.au/forums/topic/125411-pinging/#findComment-2320050
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...