Jump to content
SAU Community

Tuesday Night Meet And Cruise


subzeroR33
 Share

Recommended Posts

Hey people only new to SAU, we have organised a meet and small cruise this Tuesday night.

Start Harrys Diner 07:30 depart 08:30

Off to riverside and then Cootha.

Just a change from the usual Thursday, Saturday and Sunday cruises.

Come say hello will be in a white R33.

Link to comment
Share on other sites

do'h, i'm working 4pm - midnight on thursday... looks like i'm out :)

The meet is on TUESDAY nite, its just a change from the Thursday nite out when you get all the idiots attracting the cops.

And for people who normally work Thursday nights.

Edited by subzeroR33
Link to comment
Share on other sites

You keep saying north side and places I have no idear about :thumbsup:

I am from Ipswich heh I live where all the rev heads are..

What booosted 33 said,

Newmarket rd Windsor

it will be in ur street directory cant miss it..

Edited by subzeroR33
Link to comment
Share on other sites

You keep saying north side and places I have no idear about ;)

I am from Ipswich heh I live where all the rev heads are..

we're not ALL revheads bish :dry:

i'm from ipswich too, cant say ive seen u around...(i use to own a black 33 with gold mags, cf bonnet)

oneday when the gtr's finished ill come to these cruises :D

i know where it is, if u wanna pick me up on the way i can show u :D

Link to comment
Share on other sites

hey guys depending on work i might show up in my black r33 sounds good and not on a thurs nite which is also a plus

For some who cant make it to harrys, we will be at west end riverside about 9ish and will leave about 9:45 for cootha.

Edited by subzeroR33
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share



  • Similar Content

  • Latest Posts

    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
    • @99RS4just wondering if you ever took photos of the footwell lighting / how you bypassed the controller, im keen to haver footwell lighting come on when I open the doors too   
×
×
  • Create New...