Jump to content
SAU Community

Recommended Posts

Hi,

I was wondering whether I can get some help diagnosing a surging problem.

Basically, the car isn't boosting properly, it stutters/surges when I put my foot flat to the floor after I've been driving it for a few minutes with an intake temperature of about 20 degrees at the air flow meter, all the way to 6000rpm - then it underboosts at 8 / 9 psi (but really hard) to rev limiter at 7000. However, if you stop and let it idle for about 5 minutes aand let the temperature get up to 40+ then it boosts harder than I've felt it do before, but the guage reads less boost than it should be running (set to 10 with a manual boost controller - but boosts around 8 / 9 psi).

My fuel effieciency is really bad as well at the moment, but I don't have any fuel leaks. (For those familiar with wakefield park raceway I was going through a 1/4 of a tank of petrol per 15 minutes track time). It also has weird idle surging as well, it bounces sometimes, from about 600 to 1400rpm.

The car has aftermarket pod filter, FMIC, BOV, boost controller, HKS PFC-CON (Piggyback computer) - that's all that I know about.

Any one had anything similiar to this? I am out of ideas.

Edited by JDSracing
Link to comment
https://www.sau.com.au/forums/topic/125497-r33-gts-t-surging-problem/
Share on other sites

yea mines very similar, mine runs better with warmer air then colder air. it overboosts at night, and runs beautifully during the warm days, my fuel consumption is not to impressive, (but then again i got a heavy foot). im putting in a power fc next week, hopfull when they tune it they will come along the problem.

but as far as fixing it, check your fuel filter, alot of the time they are completly clogged full of crap, theck your coilpacks (swap them around), sparkplugs (gap them, i find that mine run better at .7 rather then 1.0), if possible pull an afm off a mates car put it on your and see if it makes a difference.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I much prefer that to an actual oil pressure issue, never would of thought it would of been a volt drop issue but SAU brains win again. Guess ill be turning down the oil pressure limit for the track and hunting some grounds. Ill hopefully update this thread with some high oil pressure and solid ecu voltage logs. 
    • You've just discovered a really good reason to tell yourself, yes, I do need to buy an aftermarket ECU. Put the MAF in the bin. Slap in the new ECU and have a think about what turbo sounds you prefer.  Do you want a 90's style BOV wooosh? Do you want a hektik tsututututu?  Mate, can't go wrong. Just gotta get that ECU and the world is your oyster. 
    • Hi. Iam just curisou about this topic. I saw this video. It is about Greddy Type FV2. I know that BoVs are about that sound but how and when to use it? I read some topic here and from what i have understand on stock RB with MAF there will be some "problems" if you use this BoV? It vents the air in to the atmosphere and the MAF on stock car needs this air back in to the intake and not out? Or is it wrong? If so...i saw you can put some adaptor to circule air back...but does that not "loose" that sound? I saw another BoV from Turbosmart and it has two "exhaust" like ports? One is for the stock tubing for letting air back and one is for "sound" and let the air in the atmosphere? Can someone please explain? This is the Greddy one:  And this is the Turbosmart.     THANK YOU!! EDIT: So i read about this topic some more and i if i understand that correctly: That Greddy can function either like BoV or 100% Bypass valve? And that Turbosmart is what they called hybrid so you can adjust what and how many air can be vented out or back in? Is this right? THX!
    • That dirty voltage drop is the culprit I suspect 
    • i cant get them all in 1 screenshot unfortunately as i just dont know how to move things around tbh, but they are all from the same log and the line crosses at the same point for all of them
×
×
  • Create New...