Jump to content
SAU Community

Recommended Posts

Hrm..

Trying to plan a RACV comprehensive inspection on a car im interested in purchasing.

Call up RACV and they like "$285 for inspection" and it will be from "8:30am - 4:30pm".

Does this sound right? an 8 hour inspection?

As it's an hour drive to the dealer and an hour drive to the racv workshop, it means I have to be up by 5:30am and get the dealer to open up the gates just for me at 7:30am....

Anyone had any experience with RACV inspections?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/125511-racv-inspection-question/
Share on other sites

When I bought my Subaru a couple of years back, I looked into getting a RACV inspection done.

My thoughts were it was too expenisve and too much hassle.

I have a family friend who is a mechanic, so I took the car for a test drive, drove it straight to his place(worked it out with him before hand of course), got him to look at it - DONE.

I would suggest perhaps you do the same thing with a mechanic you know or trust - if you slip him $50-$100, im sure he'd travel to the dealer and look at the car for you.

PS. Im thinking 8.30 - 4.30 means they will do the inspection at some time between those hours.

Patrick.....personally I wouldn't bother with the racv test esp with imports. Rather find a decent mechanic who will look at it for you as tests like leak-down and compression will tell you more about the cars health than anything the racv will do.

My original plan was to test drive, take to racv and then take car to a friend who is a mechanic. I'll contact him today and see which test he can do.

Also, Can anyone recommend an import workshop which could do an inspection located in/or around Campbellfield?

Inspecting car this wednesday.

Thanks :)

- Patrick

Yeah that is right mate if you take it to them. There are certain cars they cant do on site. Falcodores they can do at dealerships/private addreses but even my Lexus had to go to one of their sites off Lower Dandenong Rd and it cost the same (which the buyer paid for).

Report was good but ordinarilly they dont give it to the seller, only the buyer as they were the one paying. I requested a copy which the buyer OK'd as I wanted to ensure everything was rectified by Lexus under warranty before the new buyer took the car.

My g/f's brother had a couple of commonwhores done at dealerships and they took a couple of hours.

HTH

**Edit - Bec is right as $285 wouldnt cover half a day of labour for a mechanice let alone a full day. :)

okay just called racv inspection.

Mon-Wed: booking time is 8:30am-4:30pm

Thurs-Fri: booking time is 1pm - 5pm

Asked him for duration of inspection and seemed to skip around the question. Guess it depends on the car and its condition really.

Just got off the phone with Dr.Drift, Quoted $150 for a pre-inspection which involves:

- putting on hoist

- checking rust

- mods

- dyno run

- etc

He was also free at a perfect time so couldnt resist a booking, and also being half price racv's quote.

Will keep people informed.

Thanks

you might as well just stick to racv, atleast there somewhat qualified.

Maybe qualified for your average aussie sold car but not imports. Be aware of the racv test limitations like the fact that they do not unbolt anything....ie they don't even take the wheels off to check pads and rotors.....forget them finding oil leaks hiding underneath engine covers or heat shields etc.

i wouldnt be putting someones car on the dyno...if something happened, there could be a bit of trouble for you with the seller....

This is true...

No garuntees on a dyno and if it blows, you will be paying for repair.

EAS Performance

Airport West

9330 2001

Is only half the distance away, not sure what he will charge for and inspection though, give Vic a call.

Where is the dealership located?

i got one done 2 weeks ago, cost me $287 at the Seaford one.

Dropped my car in at 1pm and picked it up at 4 30pm.

They pretty much examine the whole car and give u a full report. PS they take ur car for a spin too to see what it drives like

Guest intouch
i got one done 2 weeks ago, cost me $287 at the Seaford one.

Dropped my car in at 1pm and picked it up at 4 30pm.

They pretty much examine the whole car and give u a full report. PS they take ur car for a spin too to see what it drives like

was this RACV or a dr drift (sorry are they a franchise?)

hehe i too am currently lookign for someone to do a check up on an r32 i might purchase

good replies! very helpful :(

Mine was a proper RACV inspection.

I had 2x Supras until last week when i sold the NA. Buyer wanted me to go get a RACV inspection done on the NA and i said i would if u paid me the $287 so he did

IMO the $287 is worth it if ur going to buy a car, they picked up all problems with the NA that i knew of and even more

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean yes, if you're starting from scratch on an unknown engine yes you don't need to be doing all kinds of math in the background but if you're doing relatively minor changes like AFM + injectors + boost up with some aftermarket turbos it takes quite a bit of math if you want to do something like maintain OEM fuel + timing tables but compressed and then a bit more load scale up top. I think I've spent too much time working on big engineering nightmares though so I'm a big fan of trying to constrain the scope of whatever work I'm doing as much as possible and trying to get it right before moving on. For example, a local owner just did the usual E85 + single turbo conversion to his R32 GTR and nearly burned his car to the ground doing some spirited driving up the local mountains. Turbine is unshielded and too close to the hood insulation. It's tough to balance "just get the project done" and "seemingly small details can cause massive setbacks I'm not willing to deal with".
    • No idea about Neil's steering wheel, but I have the same behaviour in the Stagea. I doubt it has ever been messed with so might be normal. Indicating to turn right at a roundabout and correcting even a little bit to the left to go around will cancel the indicator. Never considered it an issue other than it being a bit odd.
    • Does anyone know if this is off centered? Looks like it, when I indicate to go right, but turn my steering wheel slightly left it cancels (was always like that even before I started messing around with it) was wondering if anyone else has the same issue?
    • Nothing photo worthy since last update, lots of little plumbing bits for the AAC/Cold start valves, and unfortunately I still need another couple of parts for the brake booster line and the AAC into the plenum. Otherwise it all looks good to start up engine wise, onto checking the electrics/interior
    • Good news mate, plenty of spares available 5:40  
×
×
  • Create New...