Jump to content
SAU Community

Recommended Posts

Hi Guys,

Just wondering which oil is better for my R32GTR. Motul 300v Chrono 10w40 or the 4100 turbolight. My cars only mods are exhaust and coilover suspension and will stay this way for a while and running stock boost. Any info would be appreciated. Thanks.

300V is great oil but probably overkill on a street car (others would beg to differ :dry:)

4100 is only a semi-synthetic, which means it's about 15% synthetic and 85% dino juice.

I would go for the Motul 8100 5W-40 myself, either that or the 300V and do an oil analysis at 5000km to find out what it's like. You would probably find the 300V will last for extended oil change intervals if you're not being hard on it (track work).

For what it's worth, I've read that the 4100 is better for the older motors. It was something about the detergents in the full synthetics cleaning too much of the gunk accumulated in the bores and suffering blow-by as a result.

Also:

http://www.skylinesaustralia.com/forums/in...showtopic=22458

:D

Considering you have a stock motor, you might aswell go between the two products. The 8100 would do a good job. 300V is overkill and the 4100 is nothing out of the ordinary.

cowie165, thats an old wives tale. Its like saying you should warm your car up for 10 minutes each morning.

i've been using the motul 4100 10w40 for a while, no complaints here. Though i'm thinking of moving to a higher weight 10w50 or something, so might give mobil1 a shot.

hard to compare 4100 to 300v chrono, because the 300v is more than double the price or something...

I found this link ...Although it dosent relate totaly to motul its very interesting the differences between the ratings ...

Maybe we all should be running Diesel Synthets :)

http://motorcycleinfo.calsci.com/Oils1.html

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sane enough. Remove the roof liner, because the acid will go everywhere.
    • Thanks guys, I really appreciate the help and experienced opinions.  I have spent a lot of my life working on boats so I'm pretty good with fibreglass. I'll take everybody's advice in here;  I'll cut a little more of the 2nd layer away as it's a bit crunchy rust and also it's sitting high now. Then I'll wire brush it all a bit to get off anything loose, then I'll soak the bejesus out of it all in rust converter. I'll make sure to get a little hose piece and feed it into all the holes and gaps between the roof layers. Then I'll fibreglass up the holes.  Then I'll get a pallet of filler and mix it with 3 buckets of hardener and hope that is enough to build up the roof corner.  Does that sound sane? Is one type of filler better than others for this?
    • My goals for it atm are to get it registered, respray and some mild power gains eventually... I picked up the car from an elderly gentleman near the border of NSW and VIC, its honestly a bit rough and looks like its been driven on a farm (because there was so much dirt underneath). Last week I dropped the subframe and emptied the old fuel out + added a new fuel pump (think the old one went bad from old fuel). Now I'm onto fixing a coolant leak at the rear of the engine + adding a new radiator as the old one is corroded. After that i have a new bumper, coils (as the old were leaking) and lots more
    • Welcome buddy! Plenty on here and YouTube. What are your plans for it? Good luck with the Rwc and Rego bud!
    • Love this so much! Please post a photo when you have a bike on the trailer.  I was a little bit worried about having a tow bar on the Skyline, but having it hidden behind the number plate is genius
×
×
  • Create New...