Jump to content
SAU Community

Recommended Posts

I originally bought this monitor to replace my old one which died, but have since bought a new PC package (including monitor) from Dell so I no longer have any use for the Acer monitor.

Monitor is as new, was only used for a few weeks (comes with original box etc)

Monitor Specs:

Display Size: 15" (304x228mm)

Dot Pitch: 0.297mm

Resolution: 1024 x 768

Brightness: 250 cd⁄m

Contrast Ratio: 350:1

Max. Refresh Rate: 1024x768 @ 78Hz

Viewing Angle: 140 (H), 125 (V)

Response time: 25ms

Input signal: VGA (Analog D-Sub)

Speaker: 1.5W x 2

Power Adapter: Internal

Power consumption: 30W

Dimensions (WxHxD mm): 345 x 353 x 160

Weight: 3.0kg

Kensington Lock: supported

VESA wall Mounting: 75 x 75 mm

SEE HERE

I purchased the monitor for $325, but will sell for $250 o.n.o.

I'm located in Sydney, but can post at buyers expense (pick up preferred though).

Please PM or reply to this thread if you're interested.

Link to comment
https://www.sau.com.au/forums/topic/125657-acer-15-lcd-monitor/
Share on other sites

You purchase a new 15” LCD monitor with a 25ms response time just a few weeks ago for $325? That’s crazy! For that price you can get a 19” LCD with about an 8ms response time. If you want to sell this lower the price to about $150! Unless its touch screen but I cannot find anywhere that says this is a touch screen LCD.

Here you can get an 8ms 17” LCD for $220...

CLICK HERE

Thanks for your reply. Given that it doesn't appear that you're interested in purchasing the monitor, I'm at a loss as to why you felt the need to comment though.

Just to clarify...

I bought the monitor earlier this year, but only used it for a few weeks until I purchased my new PC (since which time, the monitor has been repacked and is now sitting in my wardrobe).

I purchased the item through a friend for $325 which was apparently a discounted price at the time.

I've checked the ACER website, the current RRP for this monitor is $349 SEE HERE

I don't know much about computer hardware, so I've done a quick search on the net and have come up with numerous links below listing similar prices for this monitor:

* HyperMall: $309.10 SEE HERE

* Tech Buy: $327.65 SEE HERE

* Commander Online: $329 SEE HERE

* Instant IT: $373.89 SEE HERE

* Buy Quick: $377.29 SEE HERE

...there are many more.

Surely, my price is reasonable given the above???

Obviously, there may be cheaper alternatives available, which may or may not be of the same quality etc, but that applies for nearly anything you purchase these days (funnily enough, including some of the items you have for sale in your signature). Sometimes you only get what you pay for...

If I'm missing something, please don't hesitate to let me know via PM as it is not my intention to rip people off - going off the above, I don't think you can say that I am...

In future, if you're not interested in purchasing an item, instead of rubbishing someone elses thread please keep your comments to yourself (or if you can't help yourself, do it via PM).

Thanks.

Yeah I dont know I cannot work it out... the 17" version is cheaper and the Acer 19" costs just $340...

http://www.instantit.com.au/browse/Product...liercode=ACM527

Anyway good luck with the sale...

Hmm I will offer $100 for it then.

In all honesty, it's not worth it to me to sell it for $100 - i'm not desperate for the cash, so if that's all I'll get for it, then I'll just keep it as a spare.

If you are seriously interested, I will sell it for $200 firm. I think that's more than fair considering what I paid, it's condition and what they currently retail for.

Up to you...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok gotcha, so one post to fpr  another to bov  and I have the mishimoto boost controller and a link g4+ so I’d just have the tuner set it up properly. For the last two from plenum post throttle to  ecu/ boost controller, I know that I have a hose coming from the ecu that I was confused about so I assume that’s what connect to the boost controller from the ecu? And then the last is just from plenum to boost controller then to wastegate?
    • From there, it was just a quick electrical check, prime the oil and start her up Which, is not what happened. 1. Bloody seppo Aeropro battery holder. Not only was it too tall for the battery (which I'll forgive them for, I have another battery the same nominal size that is taller than Neil's one, but the bracket is a fixed height so the battery was spaced up) But the thing that really shits me is the hardware to hold it on requires a 7/32 Hex key. WTF. No-one will ever be able to remove or install the damn thing without a hex key they don't own 2. Kill switch no longer worked once the console was installed. Neil mentioned above he had to adjust the length but it no longer cleared the console once installed. Sorted. 3. Suspiciously, the brake light holders were hanging in the boot with no globes. Sure enough the stopper on the brake pedal was missing so they are always on unless the kill switch is activated. Will pick one up tomorrow (turns out 32 and 33 don't use the same stopper) 4. All that sorted, I turned on the kill switch, turned the key to ACC. Nothing. Turned it to IGN. Nothing. Checked some fuses and found the main IGN in the boot was missing which improved things once it was replaced. Now ECU and dash lights turn on with IGN but still no fuel pump. 5. Turned it to Start....ECU on, no fuel pump, no starter. Plus the voltage dropped straight to 9v.  I suspect the starter is f**ked but am going to have to work through it all and see what is happening, really looks like more than one issue. Does anyone have the R33 fuse box key with the circuit it sources from (eg BAT, ACC, IGN, SRT etc) and supplies? I can find a translated list showing Amps and circuit without supply circuit, and I can find supply circuit without Amps and target circuit.
    • 3rd time lucky, the AAC is now all plumbed up after getting some final fittings All set up under the plenum of maximum access
    • OK, so the weight has been bugging because it was really low. I did it again today and got a more believable answer at 1246 without driver And with a 93kg driver I'm pretty sure the car was still slightly on the quickjack last time meaning the full weight was not on the scales  
×
×
  • Create New...