Stagea S2 Keyless Key

[chook]

Im after a keyless entry key for my S2 stagea, as in pic, if anyone has one lying around or doesnt use there keyless key, let me know, cheers. i realise ill have to grind key off and use it as keyring...unless someone has a blank...

[66yostagea]

Im after a keyless entry key for my S2 stagea, as in pic, if anyone has one lying around or doesnt use there keyless key, let me know, cheers. i realise ill have to grind key off and use it as keyring...unless someone has a blank...

I dont think its that simple. I tried to get a remote key but the cost for the key was like $180 and about $200 to programme it. I just got a Patrol blankand had two ordinary keys cut.

When I had my Subaru I was quoted $450 + progromming. Good luck.

[chook]

nissan remotes can be programmed yourself by following some steps, so thats not a prob, of course dealers would never tell you that.

Just get in your vech , close all doors. Using your power lock switch , lock all doors. After doors are locked take your Ignition Key and insert it and remove it from ignition switch in a slow fashion , but consitant pace. (97 and earlyer are fast) When you see the hazzard lights flash, put key in ignition switch and turn to the On postion .. Do NOT CRANK or you will have to Start over .. After in the On postion .. Hit the Lock button on remote... Hazzard lights should flash..( note..you have to reprogram all remotes when adding a new one , if you don't your old remotes will not work ) If your doing just the one , turn igntion switch off and unlock door and get out and try it. If you are doing more than one. While still in Vech with Key on . After you hit the Lock button on Remote and hazzard light flashed .. with key still on .. use master lock switch unlock doors and relock and then hit Second Remote, Lights should flash again , repeat if adding a 3rd remote.. after done just turn key off and unlock door and get out and try.

Edited July 12, 2006 by chook

[66yostagea]

nissan remotes can be programmed yourself by following some steps, so thats not a prob, of course dealers would never tell you that.

Just get in your vech , close all doors. Using your power lock switch , lock all doors. After doors are locked take your Ignition Key and insert it and remove it from ignition switch in a slow fashion , but consitant pace. (97 and earlyer are fast) When you see the hazzard lights flash, put key in ignition switch and turn to the On postion .. Do NOT CRANK or you will have to Start over .. After in the On postion .. Hit the Lock button on remote... Hazzard lights should flash..( note..you have to reprogram all remotes when adding a new one , if you don't your old remotes will not work ) If your doing just the one , turn igntion switch off and unlock door and get out and try it. If you are doing more than one. While still in Vech with Key on . After you hit the Lock button on Remote and hazzard light flashed .. with key still on .. use master lock switch unlock doors and relock and then hit Second Remote, Lights should flash again , repeat if adding a 3rd remote.. after done just turn key off and unlock door and get out and try.

Why didn't you tell us before?

Ska, this ought to go in a diy.

[chook]

sorry, only discovered recently, plenty of info re this on internet.

[stasis]

nissan remotes can be programmed yourself by following some steps, so thats not a prob, of course dealers would never tell you that.

Just get in your vech , close all doors. Using your power lock switch , lock all doors. After doors are locked take your Ignition Key and insert it and remove it from ignition switch in a slow fashion , but consitant pace. (97 and earlyer are fast) When you see the hazzard lights flash, put key in ignition switch and turn to the On postion .. Do NOT CRANK or you will have to Start over .. After in the On postion .. Hit the Lock button on remote... Hazzard lights should flash..( note..you have to reprogram all remotes when adding a new one , if you don't your old remotes will not work ) If your doing just the one , turn igntion switch off and unlock door and get out and try it. If you are doing more than one. While still in Vech with Key on . After you hit the Lock button on Remote and hazzard light flashed .. with key still on .. use master lock switch unlock doors and relock and then hit Second Remote, Lights should flash again , repeat if adding a 3rd remote.. after done just turn key off and unlock door and get out and try.

Hi Chool,

i assumu this works only with a nissan keyless entry and not the aftermarket keyless entry?

I just got my car (still in compliance) and i noticed that i was given only a niismo key and nothing else. Now the car obviously have an alarm system and an immobiliser (a red lights blinking on the dash) and got no remote. Can i follow you instructions and get a partol remote and reprogram it that way? If not i will have to replace the whole thing which i not keen on? Thanks buddy

[chook]

yeah, this is only a nissan thing, if its aftermarket you might be out of luck. is yours a Series2 ? depends on what modifications were made, if keyless entry is still factory system. best to try someone elses keyless key first before buying.

Does anyone know which model patrol key works ? the stagea part # is 80600N

Edited July 12, 2006 by chook

[66yostagea]

There was athread on this before.

The Patrolblank I got cut was in a keyplace in Aust. Fair Southport.

The same blank fits my S1, Rmr30 plus the lboys S13 and 180.

It seemed in previous discussions that the key numbers were ground off most that came in.

[stasis]

There was athread on this before.

The Patrolblank I got cut was in a keyplace in Aust. Fair Southport.

The same blank fits my S1, Rmr30 plus the lboys S13 and 180.

It seemed in previous discussions that the key numbers were ground off most that came in.

Mine is a series1 98' mdl. You mean taje sinedodyelse's nissan remote key and try ut? As far as i know the ingition (where you insert the key to start the car) patrol and nissan navara and infitis are exactly the same . I've seen it sam type of ignition. Sont know wheter it uses the same balnk or not though.

I ahve actually asked my autelec this afternoon about this. He asked me to look for the brand of the alarm fisrt under the bonnet the control box should be twice the size of a cigarrete box. If we can get the brand in oz then we are in luck (note this is for after alarm system & keyless entry). if not have to replace the system but still using the existing wiring therefore save abit on the labor itself. I have to check it when i get my car back or go to the compliance place on frinday to check it out. Cos the insurance company requires an imobiliser to be installed(at least) before they can activate the polucy. My car actually have both alarm system and immobilser not sure about keyless since i dont have the remote yet.

Btw when i close the trunk at the back i notice after slamming it shut theres a motor sound after that. What dos that do actually?

[66yostagea]

Its an electric boot lock.

[GoldZilla]

That's right, when you close the boot there's no need to slam it, just lower it until you hear the first click (like when you half-close your bonnet or a car door), and the motor pulls it closed properly.

[stasis]

if i only got 1 remote and i would add another one. Does that mean i need the way to reprgram it? If not im basically screwd and have to get an entirely new system?