Jump to content
SAU Community

Recommended Posts

Just out of interest for all, I've just delivered a customised version to a Perth performance workshop (Hyperdrive) last week for their drift car. Customised to measure 4 x EGTs with data logging 8 times per second - to be used when they are tuning it. This gives a good indication that this unit is not just for the streeter. Also, I am currently looking into a design of remotely mounting the LCD from the main circuit board for those people doing track work and want to have the LCD in direct view of the driver.

Do the air temp sensor probes use the same type of compression gland as the EGT thermocouple?

What sort of thermocouple to use in that sandwich plate for oil temp, can you supply?

All the thermocouples I supply are all exactly the same design (the EGT thermocouple has a higher temp range though) and use the same 1/8" BSP brass compression gland. In the first page on this thread, there is a pic of them (Thermocouple Pic). When the brass compression gland is fitted, the probe extends out 35mm past the compression gland which is sufficient exposure into any piping or sandwich plate.

  • 1 month later...

Do you have the following in stock ready for my order at this time?

In car display showing

2 x air temp (0-250), 1 x oil temp (0-250), 1 x exhaust gas temp (0-1000)

4 x 0-250 thermocouples (want an extra one)

1 x 0-1000 thermocouple

5 x 1/8" Brass Compression glands

Do you have the following in stock ready for my order at this time?

In car display showing

2 x air temp (0-250), 1 x oil temp (0-250), 1 x exhaust gas temp (0-1000)

4 x 0-250 thermocouples (want an extra one)

1 x 0-1000 thermocouple

5 x 1/8" Brass Compression glands

Yes - I currently have 7 kits in stock and heaps of thermocouples & compression glands available. PM Sent to you...

  • 4 weeks later...

Sorry about that. I'm rearranging my webspace. Pics and links have been updated. Otherwise, go to http://www.mearcat.com.au/Kits for the pics and links to user manual and other kits are coming...

Yeah, I'd like to start fitting the bits now to interface to your contollers, so PM me with the kit of four sensors.

so Airbox, turbo out, Manifold in, and Exhaust gas.

lots of air temp probes!

Hey i think i saw a video of yours on youtube.Nice skid pan work.What mods do you have.Sounds like you have a bit of power.

  • 4 weeks later...

Until end of Feb, these kits will available for 15% off - a saving of $75. the full kit including the main unit and 4 thermocouples is available for $420.

Email or PM me if you are interested.

  • 3 weeks later...
sounds good will want one in a couple of weeks

Please email me your details and I will note them down so that receive the 15% discount (even if you order in early March).

-Alan

  • 5 months later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Noted. Have noticed BMW are more 'high maintenance' for sure. They've attracted my attention as I think the used car prices seem reasonable vs other options, and the extra quality overall vs a commodore / camry / corolla or similar of the same vintage is appealing, especially the interior, and they are more on the sporty side whereas the others mentioned can be more cruising or economical A-to-B only.
    • Haha yeah I know, this is SAU after all, why are we talking about BMW's of all things!? I hear you on the 'don't have to worry about it' side of things. Having been fortunate enough to be have been able to buy a brand new motorbike or two...never really enjoyed them as much as I'd have liked as you worry so much about where you park it, will it get scratched, stolen, attempted theft, knocked over, etc...and yes dirty. Older less valuable bikes you can just go where you want and park it wherever and not really worry that much in comparison. And who cares if it gets dirty! Never owned a V8, and have had my eyes on VE / VF commodores for years but with their prices climbing so high, the M3 has come into focus more as prices are much closer than I've ever seen...is it a potential contender now?...of course need to factor in the S65 'maintenance' especially and like you said general M car 'tax'. One can dream anyway. But more on the reality front - did read the whole 330i thread as well and was a great read too, both threads enlightening as I've never even driven one of these cars! I do recall 330i didn't seem to have the same amount of issues for almost the same car (turbos and related differences notwithstanding)...perhaps down to getting it earlier in it's life so looked after better than the 335i? Perhaps so as your 130i has been good and quite similar, so finding a car that's been looked after well is the especially-crucial-BMW-first-step.
    • Nice. Dont worry about the time of not running. My current skyline hasn't run since I bought it. About 8 years ago.
    • It's also worth noting that I am heavily and unconditionally biased. I've had a lot of cars including some GTRs a fair while ago. I love my BMW's now a lot. They make no sense a lot of the time and the guys on here remind me regularly that I could get something else that does what I want better and cheaper. If you're going to take on an older BMW it's definitely a commitment. If you bail on it early you'll lose money and also the ability for it to put a smile on your face. Stick with it and it just gets better.  f**k I should get into advertising.  
    • Careful with posts like that around here without the flame suit on @cobo_11! 😂😂 My 330i journal is on here too. That car was so good and super reliable. We still have a 130i in the family which is almost identical to the 330i and easier to find in manual. It has also been almost faultless over the 6 or so years in the family.  I used to want an M car a lot more than I do now but if I'm honest and without trying to sound like a wanker, I can get such good performance and handling out of my 335 without needing to worry about all the crap that goes along with M car ownership. I don't need to worry about my bearings or subframe issues or the cost of replacing brakes or suspension or whether it has been impeccably maintained. And I can leave it places and not get upset when it's always filthy.
×
×
  • Create New...