Jump to content
SAU Community

32 Gtr 4 Sale (melb)

Dr DRFT
 Share

Recommended Posts

Dr DRFT Contributor

Dr DRFT

Posted
  • Author
Posted (edited)
Dude, year, kays, condition?

its a 89. with 82000km but it had the rebuilt motor put in at 80000km. Condition? like i said it had a respray not long ago, Motor is perfect! interior is good, it does have 3 scratchs on the car from a shopping trolley but been told it was easy to fix(very small! the size of a finger nail). I still aint been able to borrow camera but It is a stock looking 32 GTR white with rims. They all look the same just this one got 366kw at all 4. (MUST SEE IN PERSON TO APPRECIATE)

Edited by Dr DRFT
Dr DRFT Contributor

Dr DRFT

Posted
  • Author
Posted
To not fool potential buyers, in a GTR, 360awkw is not 440rwkw.

Well I got dyno sheets saying it has 366 at all four and was told this equals roughly 440 rear. No lag at 21psi.

Now if that is not right then I will be happy to take out the 440rwkw but I do know for a fact that it has 366kw which is 630hp at the motor.

DVSGOD Apprentice

DVSGOD

Posted
Posted
Well I got dyno sheets saying it has 366 at all four and was told this equals roughly 440 rear. No lag at 21psi.

Now if that is not right then I will be happy to take out the 440rwkw but I do know for a fact that it has 366kw which is 630hp at the motor.

If shes pushing 366kws to all fours youed be lucky to see 400kws at the rears if you pulled the fuse.Someones pulling ya leg mate.Still sounds a nice set up , should post up some pics , good luck with the sale :P

Dr DRFT Contributor

Dr DRFT

Posted
  • Author
Posted
If shes pushing 366kws to all fours youed be lucky to see 400kws at the rears if you pulled the fuse.Someones pulling ya leg mate.Still sounds a nice set up , should post up some pics , good luck with the sale :P

Thanks mate but like I said just going on what I have been told. it does have 366kw at all four (630hp@Motor). i took out the other figure. I trying to get photos done but been raining... :P

Dr DRFT Contributor

Dr DRFT

Posted
  • Author
Posted
Hey, this car was Johnnys wasn't it?

If so, seen it go and it THUMPS.

Good Luck with the sale.

yea it was johnnys but he had it when it was just boosted I had the motor rebuilt and now it is a much more powerful car.

It's got adjustable Tiens all around.

C & D Motorworks did the build.

I have all reciepts as I have bought nearly everything brand new.

I put a R33 Front Diff, R33 Gearbox, R33 rear two way diff only because I was told it would be much better cause the gearing is different but who ever buys it can put the r32 gearbox in of they want as it comes with both.

As I said only reason for sale is lost of licence and suspended sentence can not drive.....

Nothing wrong wit car it is beatiful to drive just I can't drive it til next year.??? :P

Dr DRFT Contributor

Dr DRFT

Posted
  • Author
Posted
yea it was johnnys but he had it when it was just boosted I had the motor rebuilt and now it is a much more powerful car.

It's got adjustable Tiens all around.

C & D Motorworks did the build.

I have all reciepts as I have bought nearly everything brand new.

I put a R33 Front Diff, R33 Gearbox, R33 rear two way diff only because I was told it would be much better cause the gearing is different but who ever buys it can put the r32 gearbox in of they want as it comes with both.

As I said only reason for sale is lost of licence and suspended sentence can not drive.....

Nothing wrong wit car it is beatiful to drive just I can't drive it til next year.??? :whistling:

No one intrested in a modded GTR with real power. Rebuilt with Jap Parts not cheapy parts!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Kinkstaah · Posted

      Hey, it's me! Though honestly, if I had 20M in my bank account tomorrow, I would not want to be rid of my car all of the sudden - Which makes me think this is money stuff, not "I actually hate car" stuff. I'd probably double down and buy even more trinkets and fun things for it. If this is not you, then sell it cheaper. It will sell at a certain price after all.
    • Kinkstaah
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Kinkstaah · Posted

      Of course it would be - But you shouldn't be here.
    • GTSBoy
      Hiya!

      By GTSBoy · Posted

      This is the LCA mount reloctaion kit. Self explanatory in its description. https://au.gktech.com/products/s13-180sx-r32-subframe-anti-squat-reduction-weld-in-kit?_pos=62&_fid=1e812d392&_ss=c These are the alloy subframe bush inserts that I am using. I like them. https://au.gktech.com/products/rear-subframe-slip-in-collars?_pos=29&_fid=1e812d392&_ss=c Alternatively, if you have original and shitty bushes, you might consider outright replacement with poly. https://au.gktech.com/products/polyurethane-rear-subframe-bushes?_pos=28&_fid=1e812d392&_ss=c I would also higly recommend that you look into adjustable RUCAs and tension rods, so you can sort out the camber and bump steer behaviour, especially if the car will be any more than ~15mm lower than stock. I would also highly recommend the GKTech FUCAs, although you really should do some research and learning on the subjetc of R32 FUCAs before making any decisions. All of this will be criticaly difficult to get through a TÜV inspection too, if that happens to be relevant to you. Note that if you do install the relocation kit, you will absolutely have to replace the associated bushes with spherical joints (you can read all about that on the product page) or upgrade the LCAs also.
    • Milkmun
      Does the r33 have a cabin filter?

      By Milkmun · Posted

      None on 33s.
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      I picked up my block and head last week and have been slowly assembling it since then. Pictures I took earlier this week. The rest of the auxiliaries are on now. I just have my intake manifold runners to tap for my WMI direct port setup before putting it back on. I should hopefully have the motor back in by this weekend.   
×
×
  • Create New...