Jump to content
SAU Community

Recommended Posts

Flying Performance International is the only official online Hybrid & SABER dealer

Flying Performance International official website www.flyn.com.au

Check out the Hybrid & SABER official website at www.powerdigger.com

LOGO10.JPGflying%20banner2.JPG

logo%20top%207.JPG

sabergauges.JPGsabergauges%20on%20off.JPG

SABER 60mm ELECTRONIC GAUGES

SMOKEY LENS SERIES now for sale! On SPECIAL ONLY $150 each gauge

SABER 60mm gauges are electronic blacked out gauges which have high responsiveness and refined designs. When the car is off they have a black face with no numbers on them. As soon as the car is turned on, the gauges light up in bright white with full effect.

Boost%20blacka.JPGOil%20press%20blacka.JPG

Oil%20temp%20blacka.JPGWater%20tamp%20blacka.JPG

AF%20blacka.JPG

* SABER electronic gauges provide more accurate reading over the mechanical type gauges, giving you a peace of mind over the reliability of your rides.

SABER full-line up: boost pressure in PSI (for turbocharged and supercharged engines), oil temperature, oil pressure, water temperature, and air / fuel ratio, all with SABER black face and white dials.

* SABER gauge dials are invisible when the ignition switch is off. Once the ignition switch is turned on, a clear display appears with white LED illumination. A red emitting instrument needle pointer are used in the gauges to increase visibility at night and in low-light conditions. They also features built-in light dimmer function.

* SABER gauge pointers are driven by stepping motor with a microprocessor, needle accuracy up to 0.1 degrees of movement. It provides a smooth instantaneous response for rapid acceleration of high performance vehicles.

* The included removable gauge visor is for eliminating the virtual image of gauges reflected on the windscreen.

* All SABER gauges are applicable only for 12V vehicles.

* Each Kit also comes with gauge mounting kit, gauge visor, all wiring and a step-by-step instructions.

Payment Instruction

Postage & Handling = $15 freight Australia wide

PAYMENT TO : FLYING PERFORMANCE INTERNATIONAL PTY LTD

ST. GEORGE BANK LIMITED

BRANCH NO. : 112-879

ACCOUNT NO. : 065766824

PLEASE you must give the bank your forum user name as the description of the transaction. That way it shows up on our bank statement with the amount you have sent us. So we can match your order with your payment otherwise there may be a delay for us to match the payment to your order!

After you have made the payment, please you must e-mail us with your payment date & amount, your name & postal details.

Once we receive your payment, we will inform you and send it at the same time.

It will be packed and sent securely in boxes or bubble padded bags for best protection.

Optional extra

7f_1.JPG $48 SABER stainless steel mesh air filter

41_1.JPG $180 SABER 60mm electonic smokey lens gauges

59_1.JPG $259 SABER GDB WRX /STi air intake kit

cf_1_b.JPG $49 HYBRID a set of 10 HOSE CLAMPS, 2.5", 2.75" & 3"

f0_1_b.JPG $19 HYBRID SILICONE HOSE REDUCER, We have 3" - 2.75" / 3" - 2.5" / 2.75" - 2.5", you tell us the size you want.

0a_1_b.JPG $17 HYBRID SILICONE HOSE, 3" / 2.75" / 2.5" / 2.25" / 2" / 1.5" STRAIGHT HOSES

53_1.JPG $7 FLYING SILICONE VACUUM HOSE

93_1_b.JPG92_1.JPG

12_1.JPG67_1_b.JPG $49 Flying bov

05_1_b.JPG $49 Flying boost controller

7b_1_b.JPG $29 Flying boost controller

5c_1_b.JPG $199 + $25 extra freight

0a_1.JPG $189 Flying Rb20det / rb25det turbo manifold

dd_1.JPG $149 Flying 180sx s13 r32 300zx camber arm

e3_1.JPG $149 Flying s14 s15 r33 r34 camber arm

fe_1.JPG $99 FLYING SKYLINE R32 R33 R34 RB20 RB25DET TURBO DUMP PIPE

7b_1.JPG $25 FLYING OIL CATCH CAN

HDS15HR.jpg

HSD Suspension

HSD coil-overs are used by 2005 Drift Australia champion Darren Appleton and many other prominent drivers in Australia. Now available only in the premium HR series, HSD coil-overs feature 55mm heavy-duty full-tapped dampers with 15-step damping adjustment. All models feature pillow-ball top mounts for easy installation and maximum control. Models with strut-type suspension also feature camber adjustment, while all models feature adjustable base height and spring seat height.

HSD coil-overs are supplied with spring rates intended for club-level motorsport, drift and street driving. Harder or softer springs are also available at just $100 a pair. All rates from 3kg/mm to 14kg/mm are kept in stock.

All HSD coil-overs come with a 12-month warranty against manufacturing defects.

NISSAN

S13 Silvia or 180SX $1549

S14 200SX $1549

S15 200SX or Silvia $1549

R32 Skyline GTS & GTS-t (GTS-4 available to order) $1549

R33 Skyline GTS25 and GTS25t $1549

R34 Skyline GT and GT-t $1549

R32 GT-R $1549

R33 GT-R $1549

R34 GT-R $1549

Z32 300ZX and Fairlady Z $1549

Z33 350Z $1549

TOYOTA

JZX90 Mark II, Cresta, Chaser $1549

JZX100 Mark II, Cresta, Chaser $1549

JZA70 Supra (Also GA-70, MA70, MA71) $1549

JZA80 Supra $1549

SXE10 Altezza and Lexus IS200 **NEW** $1549

SUBARU

GC8 Impreza WRX (MY94 to MY00) $1599

GDB Impreza WRX (MY01 to MY02) $1599

GDB Impreza WRX (MY04 on) $1599

SG5 Forester $1599

MAZDA

FC3S RX-7 (Series IV and V) $1549

FD3S RX-7 (Series VI to VIII) $1549

MITSUBISHI

CP9A Lancer Evolution (IV to VI) $1549

CT9A Lancer Evolution (VII on) $1549

HONDA

EG Civic $1549

EK Civic $1549

DC2 Integra $1549

DC5 Integra **NEW** $1599

AP1 S2000 $1549

Edited by [FLYN]

sabergauges.JPG

SABER gauge pointers are driven by stepping motor with a microprocessor, needle accuracy up to 0.1 degrees of movement. It provides a smooth instantaneous response for rapid acceleration of high performance vehicles

* SABER electronic gauges provide more accurate reading over the mechanical type gauges, giving you a peace of mind over the reliability of your rides.

SABER full-line up: boost pressure in PSI (for turbocharged and supercharged engines), oil temperature, oil pressure, water temperature, and air / fuel ratio, all with SABER black face and white dials.

you can actually go to our web at www.flyn.com.au or powerdigger.com to see how the gauges look in action.

Hey Flyn, I like the look of the saber gauges, and am looking for one to add to my R32 GTS-4. I'm after an electronic boost gauge, do Saber require a seperate control unit? Also how much for a single A pillar mount to suit?

And while I'm throwing the Q's around, what's the rough price of the gts-4 coilovers?

Hey Flyn, I like the look of the saber gauges, and am looking for one to add to my R32 GTS-4. I'm after an electronic boost gauge, do Saber require a seperate control unit? Also how much for a single A pillar mount to suit?

And while I'm throwing the Q's around, what's the rough price of the gts-4 coilovers?

The SABER gauges doesnt need any external control box, so no extra money is needed.

Sorry, we dont have the gauge mount as the SABEr gauges are 60mm, we only have 52mm gauge mount.

the coliover is $1549, but we need to place an order for you.

No worries.

Well, I'd like to go for the boost gauge, I'll try to source an a pillar mount to suit 60 mm from elsewhere.

Let me know where to send payment, and the cost for shipping to 3108

No worries.

Well, I'd like to go for the boost gauge, I'll try to source an a pillar mount to suit 60 mm from elsewhere.

Let me know where to send payment, and the cost for shipping to 3108

Thanks for your purchase, Payment Instruction

Postage & Handling = $15 freight Australia wide

PAYMENT TO : FLYING PERFORMANCE INTERNATIONAL PTY LTD

ST. GEORGE BANK LIMITED

BRANCH NO. : 112-879

ACCOUNT NO. : 065766824

PLEASE you must give the bank your forum user name as the description of the transaction. That way it shows up on our bank statement with the amount you have sent us. So we can match your order with your payment otherwise there may be a delay for us to match the payment to your order!

After you have made the payment, please you must e-mail us with your payment date & amount, your name & postal details.

Once we receive your payment, we will inform you and send it at the same time.

It will be packed and sent securely in boxes or bubble padded bags for best protection.

By the way, Saber has another exciting new product launched at the same time of these 60mm electronic gauges.

It is the Saber Stainless Steel Mesh air filter, they have 2 models.

1 bigger one, and 1 smaller one.7f_1.JPG

The smaller one is actually the one comes included the Hybrid late WRX intercooler kit as the cold air intake system.

it is how the samller one in the late WRX cold air intake kit looks like

the smaller one was chose becauese the limited space provide in the late WRX

but for the skyline, the bigger one can be used easily on the air flow meter, that is on the passenger side

59_1.JPGlate WRX cold air intake kit

SABER Combo Deal, exclusive to FLYING

Purchase 3 SABER Gauges in a Combo Deal and Recieve 10% off (Note - All 3 gauges must be different.)

Purchase 4 SABER Gauges in a Combo Deal and Recieve 15% off (Note - All 4 gauges must be different.)

Purchase 5 SABER Gauges in a Combo Deal and Recieve 20% off (Note - All 5 gauges must be different.)

' date='21 Jul 2006, 12:59 PM' post='2346205']

We here introduce our FLYING Combo for the NEW SABER 60mm electronic gauges.

Any 3 different gauges $486

Any 4 different gauges $612

All 5 gauges $720

is it atill $720 for all five gauges????



  • Similar Content

  • Latest Posts

    • For something a little more serious, Davinci Resolve is about the best there is for free video editors. No expiration dates or watermarks, completely free.
    • Well, it's taken me until the last week of 2024 to actually do something on the Skyline but I consider it a good head start to 2025's efforts! I managed to justify (to myself anyway...) my purchase of the lift table. It made taking the rear subframe out a lot easier than it would have been without anyway! Everything is out and stripped down ready for a clean then powdercoating.  She's pretty grubby under there but pretty good condition for a 38 year old Japanese tin bucket. 12 years of zero street time have obviously helped that... I need to decide which of the factory suspension arms I will keep and replace so I only get what I'm keeping powdercoated.  Baby steps but it's a start!  
    • Turbo gods, some assistance and recommendations please I'm looking into a turbo kit for my 2.5 from MX5 Mania >>>>> https://mx5mania.com.au/products/copy-of-mx-5-nc-2-5-litre-engine-conversion-turbo-2005-2013 Power wise I would like about 200kw atw, and of course dose noises, apparently if you keep a stock 2.5 under around 200kwatw the engine and drivetrain will not hate life even when ragging on it a bit Max RPM on the 2.5 is around 6500rpm The turbo MX5 use is something around the disco potato size as  packaging room for the turbo is pretty limited, which will, I believe, give me my power goals I want and not have the turbo either under, or oversized, but the rear housing bit is confusing  It comes with either a 0.64 or 0.86 From my understanding, which so far is based off googling, so make of that what you will 0.64: spools faster = good Makes more EGT heat on boost = bad Less topend power than 0.86 = I'm only looking for 200 atw so that point may be mute????, I don't know, hence my questions  0.86: Spools a "little" slower = how much slower??? remembering 6500 is my max rpm Makes less EGT heat = good Makes a little more power up top = again, power goals is only around 200 Also, this is a street car, so there will not really be any long track sessions, in saying this I would want it so it was happy with at least 3 hot laps at Wakefield Park if the need arises  I already have a fancy pants triple pass radiator, and a oil cooler with thermostat will be getting installed as well Thanks for any information or recommendations you have 👍, and of course, the comments about me wasting money on drive in drive out modifications, or any other snide remarks about my manhood for owning a MX5 🤣    
    • Tape some wool onto the vent then take it for a drive I did this to my reverse cowl and was instantly unhappy, as anything over about 60kph would have the wool enter the engine bay, thus just adding underbonnet pressure and stooging my coolant stack, it did let alot of heat out when stationary though, which really didn't help once the car was moving, with the reverse cowl you could watch the coolant temps cheap up the faster you went on the hwy, I assume it would be alot worse doing track day speed With the vented bonnet (just after the radiator and about 1/3 up the bonnet) on my old R33 the wool on the leading edge sat at about a 45° angle as air poured out of it From looking where your vents are, and their size, I believe you should be fine at speed and air should be evacuated from the engine bay, I think it will be a night and day difference when stuck in traffic though for removing the trapped heat, and not sitting there cooking when parked up after driving around... #convection  Post wool tuft pics and data for science  This beastie is one nice and unique rig, enjoy
    • It is possible to do this stuff for "cheap". But you need to be able to get deals on all the bigger items, and it really helps if you're fully capable of doing your own work. As soon as you're paying retail for new parts, or buying "kits" because you can't fabricate necessary bits and pieces, and if you really need someone else to take the reins of doing the work because you don't have the space/time/skills/confidence to  rip deep into the car and put it back together in a working fashions.....then you pay. And these days, pay means a lot of money. You'd think things would get cheaper, but they don't. They just seem to keep getting more and more expensive.
×
×
  • Create New...