Jump to content
SAU Community

Recommended Posts

I live in brisbane but gotta work in western qld (emerald) for three weeks. I was thinking of fitting some of those ultrasonic whistle things commonly called 'roo shoo' to my skyline to hopefully reduce the chance of hitting wildlife (can you imagine what a red would do do a fibreglass front bar and intercooler :( ) does anyone have any experience with these?? What are your opinions??

Link to comment
https://www.sau.com.au/forums/topic/126169-shoo-roo-do-they-work/
Share on other sites

my only concern is that if a roo is sitting at the side of the road and you come driving along with one of these things, instead of jumping off in the direction he was sitting he jumps accross the road to get away from the sound. i don't think there is any really way to avoid hitting a roo, other than to have huge spot lights that shine like daylight so you can see everything on the side of the road to make sure if you do see a roo you have time to stop.

get a rental car for 3 weeks... or a really big bullbar? a rental might be expensive, but just condier it. how much are those roo things anyway? i think i saw RACV were renting echos for like $38 a day, about 800 for 3 weeks....

are u going to stay there while uw ork, or make the trek every day? might be worth usin public transport?

PS - just rememebr rent a bomb or whatever, its like $10 a day. just drive (ie thrash) one of those bombs for 3 weeks

Edited by VB-

This could earn me some forum-flaming but.... drive slower? ;op

As for the roo device, I know someone who has electronic ones on the front of his car. They're ultrasonic, and apparently they DO scare cats away... I can't confirm this personally, but i'd suspect that cats would run from cars regardless.

Edited by RANDY

I looked into these further, apparently they DO work but are obviously not 100% effective, eg: if the roo is coming from a bad angle they still can effectivley 't bone' your car... its not like they stop look listen before crossing the highway..

They dont actually scare the wildlife away but merely make it aware of your cars presence earlier, so they are less likely to freak and run straight toward you. Most roos will just freeze and look at you, its still your job to avoid it lol (although i'm only going on what others have said on the net).

No flaming for suggesting to drive slower- no way would i be speeding anyway, coilovers + car swollowing pot holes are never a good combination..

Public transport?? Emerald is not a big town, i doubt they would have anything like that..

Anyway i've got bigger concerns, wont be taking the car after all, i went to buy some oil to do a service, then got a flat rear tyre, took it to bob janes who are now insisting both my rear tyres are 'shagged'- really worn on the inside edge, and were too dangerous!! Hence i've been forced to get some tyres, puncture repair, wheel align etc.. which has added up to the princely sum of $600 (and yes they are cheap ass nexxen tyres too, but 18's). So i've just re-booked my flight up there, the line will be staying at home :)

Assuming i had enough time to put the oil in and get it ready AND get enough sleep for a 12hr drive tonight, i no longer have the savings to cover if anything went majorly wrong on the drive up there (eg: major breakdown).

Needless to say i thought my tyres were fine but i admit its been a while since ive been under the rear of the car (was the very inside edge that was worn) i will demand to see the condition of my old ones before forking out my cash!! :(

lol never thought of that..

although technically cruising at 100kph you're barely boosting and not lifting off throttle so prob would have little effect, unless you had a huge turbo or something..

When i said forced i meant that i was told my tyres were useless, so i had to buy replacements.. its not like they got me in a headlock or something lol, they said the tyres were unsafe and that they wouldn't survive a few 100kms more driving round town yet alone a 2000km round trip to emerald and back, hence i said to go ahead and replace them. I was very sceptical as far as i knew the outer edge of the tyres had at least 60% wear, and i never noticed a problem with the way the car drove either.

went and had a look at them and they were right, the inside shoulder was worn to the shiznit on both sides, but the passengers side was especially bad, somehow it was falling apart from the INSIDE with chunks of rubber INSIDE the tyre!!, the whole inner shoulder was thin as, and easliy pliable.

Probably what caused it to go flat, if this had not happened today I would have been happily travelling at 100+kph on my way to emerald and i dont wanna know what would have happened if the tyres had let go at that speed :P Likely they would have had to cut me out of the car if theyre was anything worth saving :D:P

I didn't realise the wear on the tyre as i dont routinely climb under the rear of the car (lets face it they'res not much to do under there lol), plus with my bodykit and rideheight its hard to notice that sort of wear on the tyre if you're doing other things to the car. It drove fine, which i know sounds surprising, but i dont hammer my car everyday, but the times i did it seemed to have the 'normal' amount of rear tyre grip etc... and drove as usual.

Thinking it was down to a incredibly dodgy wheel alignment, the last place i took it to i knew it wasn't right so i took it back, they had the car for an hour and still didn't fix a dodgy job!! Today when they re did it they said alignment was waaay out. Either that or maybe my hicas has somehow caused this...

You would not believe how many kms ive travelled in this car, i'd say at least 2000km in the last month. I encourage everyone to pay more attention to their tyres when they are planning a long trip!! I'm counting myself lucky for sure.

Do Shoo roos work.

In a word. No.

Explanation: I used to live in SW NSW. Loads of Roos, especially in the dry seasons, when they'd come to the roadside to eat the grass growing there from runoff of whatever rains were coming, or dew that rolled off the road.

The humble Kangaroo is a stupid animal, and is just as likely to go "Hey, that sounds interesting, I'll take a close look' as the mack truck bears down on it as it is to jump away.

You'd be better of using a Horn, driving during the day and paying a lot of attention, which means changing drivers every couple of hours. It's better than tanking a roo doing 100. (= dead roo and dead you)

The funny part is, now that I live in Melbourne, I went to a 'fine dining' restaurant a few weekends ago, and they had roo on the menu. Why anyone would eat that is beyond me. The people that kill them aren't farmers, or even butchers, they're jimbob and his twelve sons who blast away at them, then hang up their ring worm infested, blow fly ridden, and tape worm penetrated carcasses up to bleed. Then they take them back to town. 4 hours later.

Roo's aren't animals I'd eat. And I'd eat pretty much anything.

well. that's put me off ever trying kangaroo :P

as for hitting them, i finish late and see them a bit... i usually drive a little faster and by the time they pop their head up and realise there's a car i've already hammered past. haha probably not the best idea though :D

i have hit one once, but it was hopping out of the bush minding it's own business - it had nothing to do with the car startling it.

Anyone who does loads of driving knows the only way to approach roos is with a steady foot, definately no BOV crap.

Roos are so used to vehicle noise that they'll stand their ground UNLESS you back off. That's the minute they panic and go anywhere. It takes real nerve to see a heap of roos and still maintain your speed but if you do, they'll just watch you go by and keep eating.

Try it some time, in someone else's car if you have doubts.

The few times I have come across them I've had my highbeams on. They have just staired and looked, did not move one inch. So my thinking is, if you know they arent going to move, you can go the other side of the road and just go around them.

Thats just going by my experiences tho.

The few times I have come across them I've had my highbeams on. They have just staired and looked, did not move one inch. So my thinking is, if you know they arent going to move, you can go the other side of the road and just go around them.

Thats just going by my experiences tho.

They get dazzled by the headlights. If you keep the headlights on them, they'll stay there (that's how the shooters usually get them, they dazzle them with a spotty, and put a bullet into their heads)

The problem with applying that to the road is that you have to keep the lights exactly in their eyes. Which means that as soon as you get within 10 metres, they come out of the cone of illumination, and decide to move, in any direction that takes their fancy, but they often double and triple back. Hit them at less than 40 km/hr and the roo will hop away while you weep and pick up peices of your front assembly.

I've heard of the hazard light's being used though. Good idea.

The best idea: PAY F@#KING ATTENTION. keep aware. It's hard on long trips, you go into 'the zone' probably have one hand on the wheel and decide to change CD's. all stuff you've done a million times before, but this once, a roo decides to follow that chicken and cross the road, you swerve and hit it anyway, now in deep crap.

It's hard to pay attention for long periods. For everyone.

(But Koz, I'm an exception, I have an IQ of 190, am a neurosurgeon and am only 20!

Yes, that includes you little grasshopper. You'll be able to do it many many times, provided an obstacle doesn't present itself during one of your lapses of concentration.

But Koz, I've driven that road in my car thousands of times.

Yes grasshopper, but it's like driving in the city. You must assume that every car has a kid behind it, and in the scrub that every bush may have a Roo, or English backpacker ready to cross the road. This takes concentration, so take breaks often.

Ah Koz, what would you know?

More than I want to.)

As mentioned, they are attracted/dazzled by the light. One method you can use, but it takes balls to do on a dark country road, is if you see a roo on the road, turn your lights off for a second, when you turn them back on the roo *should* be gone. I have seen someone do this before, and the roo got out of the way as soon as the lights got turned off, but I have never tried it myself.

Disclaimer: I take no responsibility for what happens if you try this. Although I have seen it work before, it is no guarantee that it will work every time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can perhaps see how the R33 appreciators would think so.  
    • Thanks, I removed the fuse and the relay from the car and made my own circuit with them to test them with a test bulb.  I will look for the wiring diagram and go from there.
    • Jdm DC2R is also nice for a FF car compared to the regular hatches of the time.
    • Now that the break-in period for both clutch and transmission is nearly over I'd like to give some tips before I forget about everything that happened, also for anyone searching up how to do this job in the future: You will need at least 6 ton jack stands at full extension. I would go as far as to say maybe consider 12 ton jack stands because the height of the transmission + the Harbor Freight hydraulic platform-style transmission jack was enough that it was an absolute PITA getting the transmission out from under the car and back in. The top edge of the bellhousing wants to contact the subframe and oil pan and if you're doing this on the floor forget about trying to lift this transmission off the ground and onto a transmission jack from under the car. Also do not try to use a scissor jack transmission lift. You have to rotate the damn thing in-place on the transmission jack which is hard enough with an adjustable platform and a transmission cradle that will mostly keep the transmission from rolling off the jack but on a scissor lift with a tiny non-adjustable platform? Forget it. Use penetrating oil on the driveshaft bolts. I highly recommend getting a thin 6 point combination (box end + open end) wrench for both the rear driveshaft and front driveshaft and a wrench extension. These bolts are on tight with very little space to work with and those two things together made a massive difference. Even a high torque impact wrench is just the wrong tool for the job here and didn't do what I needed it to do. If your starter bolts aren't seized in place for whatever reason you can in fact snake in a 3/8 inch ratchet + 6 point standard chrome socket up in there and "just" remove the bolts for the starter. Or at least I could. It is entirely by feel, you can barely fit it in, you can barely turn the stupid ratchet, but it is possible. Pull the front pipe/downpipe before you attempt to remove the transmission. In theory you don't have to, in practice just do it.  When pulling the transmission on the way out you don't have to undo all the bolts holding the rear driveshaft to the chassis like the center support bearing and the rear tunnel reinforcement bar but putting the transmission back in I highly recommend doing this because it will let you raise the transmission without constantly dealing with the driveshaft interfering in one way or another. I undid the bottom of the engine mount but I honestly don't know that it helped anything. If you do this make sure you put a towel on the back of the valve cover to keep the engine from smashing all the pipes on the firewall. Once the transmission has been pulled back far enough to clear the dowels you need to twist it in place clockwise if you're sitting behind the transmission. This will rotate the starter down towards the ground. The starter bump seems like it might clear if you twist the transmission the other way but it definitely won't. I have scraped the shit out of my transmission tunnel trying so learn from my mistake. You will need a center punch and an appropriate size drill bit and screw to pull the rear main seal. Then use vice grips and preferably a slide hammer attachment for those vice grips to yank the seal out. Do not let the drill or screw contact any part of the crank and clean the engine carefully after removing the seal to avoid getting metal fragments into the engine. I used a Slide Hammer and Bearing Puller Set, 5 Piece from Harbor Freight to pull the old pilot bearing. The "wet paper towel" trick sucked and just got dirty clutch water everywhere. Buy the tool or borrow it from a friend and save yourself the pain. It comes right out. Mine was very worn compared to the new one and it was starting to show cracks. Soak it in engine oil for a day in case yours has lost all of the oil to the plastic bag it comes in. You may be tempted to get the Nismo aftermarket pilot bearing but local mechanics have told me that they fail prematurely and if they do fail they do far more damage than a failed OEM pilot bushing. I mentioned this before but the Super Coppermix Twin clutch friction disks are in fact directional. The subtle coning of the fingers in both cases should be facing towards the center of the hub. So the coning on the rearmost disk closest to the pressure plate should go towards the engine, and the one closest to the flywheel should be flipped the other way. Otherwise when you torque down the pressure plate it will be warped and if you attempt to drive it like this it will make a very nasty grinding noise. Also, there is in fact an orientation to the washers for the pressure plate if you don't want to damage the anodizing. Rounded side of the washer faces the pressure plate. The flat side faces the bolt head. Pulling the transmission from the transfer case you need to be extremely careful with the shift cover plate. This part is discontinued. Try your best to avoid damaging the mating surfaces or breaking the pry points. I used a dead blow rubber hammer after removing the bolts to smack it sideways to slide it off the RTV the previous mechanic applied. I recommend using gasket dressing on the OEM paper gasket to try and keep the ATF from leaking out of that surface which seems to be a perpetual problem. Undoing the shifter rod end is an absolute PITA. Get a set of roll pin punches. Those are mandatory for this. Also I strongly, strongly recommend getting a palm nailer that will fit your roll pin punch. Also, put a clean (emphasis on clean) towel wrapped around the back end of the roll pin to keep it from shooting into the transfer case so you can spend a good hour or two with a magnet on a stick getting it out. Do not damage the shifter rod end either because those are discontinued as well. Do not use aftermarket flywheel bolts. Or if you do, make sure they are exactly the same dimensions as OEM before you go to install them. I have seen people mention that they got the wrong bolts and it meant having to do the job again. High torque impact wrench makes removal easy. I used some combination of a pry bar and flathead screwdriver to keep the flywheel from turning but consider just buying a proper flywheel lock instead. Just buy the OS Giken clutch alignment tool from RHDJapan. I hated the plastic alignment tool and you will never be confident this thing will work as intended. Don't forget to install the Nismo provided clutch fork boot. Otherwise it will make unearthly noises when you press the clutch pedal as it says on the little installation sheet in Japanese. Also, on both initial disassembly and assembly you must follow torque sequence for the pressure plate bolts. For some reason the Nismo directions tell you to put in the smaller 3 bolts last. I would not do this. Fully insert and thread those bolts to the end first, then tighten the other larger pressure plate bolts according to torque sequence. Then at the end you can also torque these 3 smaller bolts. Doing it the other way can cause these bolts to bind and the whole thing won't fit as it should. Hope this helps someone out there.
×
×
  • Create New...