Jump to content
SAU Community

Engine Stalling

LTHLRB

By LTHLRB,
in Engines & Forced Induction

 Share

Recommended Posts

LTHLRB Grand Master

LTHLRB

Posted
Posted

Hey guys, my engine is hesitating and almost stalling (stalling at time) when off throttle. Like i put it in nuteral to slow down it just drops too low in the rev range. I have a catch can without a breather, would that be the cause? could it be a vacuum leak somewhere in the plenum and the hoses on the plenum?

Link to comment
https://www.sau.com.au/forums/topic/126214-engine-stalling/
Share on other sites
Craved Grand Master

Craved

Posted
Posted

std one disconnected how? like venting to atmosphere?? if so very bad as they leak at idle

ecu reset, check idle adjustment on the AAC valve on the plenum, Throttle position sensor could be loose or setup wrong, clean the AFM as well

heaps of stuff to try :P

Link to comment
https://www.sau.com.au/forums/topic/126214-engine-stalling/#findComment-2331915
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • silviaz
      Import insurance in 2025

      By silviaz · Posted

      Interesting, I've heard complete opposite on my end. Bit of a lottery I guess.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Getting Dangerously close to being ready to go back in the car. Rockers in with clearance castings now (and a quick check with the USA for the torque settings for the larger custom bolts) Covers and ported FAST Manifold sitting on there. Not fully tightened down as there's some clearancing required for the water pump with the earlier LS1 water pump styles. Example of the clearancing needing to be done: The body has to be ground a little but I'm struggling finding an actual piece of it. The later variant of water pump resolves the issue as the manifold was designed around it. It only came on the VZ LS1 in Australia, it got a different pulley for Gen4 motors. (it also costs $450... vs... $0).
    • eagleaus
      Lower A arm Skyline v35

      By eagleaus · Posted

      https://files.fm/f/5atwkuvcjd
    • eagleaus
      Lower A arm Skyline v35

      By eagleaus · Posted

      Doing some height adjustment on front suspension on a v35 and noticed this. The passenger side looks correct. So wondering what's happened to the drivers side?
    • dbm7
      Got this r31 silhouette flood car to rebuild.

      By dbm7 · Posted

      Oh...I have the electric mirrors as well iirc ...they're in the same state as just about every other R31 door mirrors, with the 3 plastic screw towers broken/cracked in the plastic molding. All the interior is 'dry', so the mirror switches etc likely all work fine. Some pics below of the trimmer pieces ~ looks to me like previous owner, painted chrome finished trims with black paint ...ergo, the chrome underneath is likely a-ok... ...starts to look yukky posting stuff like this, how much did it cost in fuel on your last sortie up this way?...me just thinking aloud, borrow someone else's 4cyl to cut costs, come do your own pick'n'pull like before to save me some bother...hehe.. but whatever, I'll just earmark bits I know you want, because the way this is all panning out, I'll be able to retire the R31 from daily duty at long last, replacing it with a Subaru wagon I'm lining up in the wings...ergo, my attitude towards the donor pinny shell is starting to wane a bit, and I'm more than happy to help you out there... Like you say though, no rush...and I'll guarantee we won't be moving too far from this locale at any rate 😎
×
×
  • Create New...