Jump to content
SAU Community

Recommended Posts

I think a lot of you are looking at this the wrong way. This car is a bit of a leap for holden. They have always had something to 'base' their cars on, this time they havent.

Its a car for the general Aussie family. Which these days is doing ok, bit over weight, likes a bit of torque for towing the boat/trailer/caravan wants rwd, etc.

Its built to a spec. Being holden want these features in it for this cost. Its a little more out there, which seems to be the fashon these days with cars (5 series BMW, mazda 6 etc). The fact the engine is smaller than the 380, I really dont know if thats going for it or not.

With the 6L pushrod thing, that motor has more R&D in it that I would think anything else ever, for Australia its a tops motor, sit on 1500rpm cruising along at 110kmh put your foot down to over take the truck, it works. With no revs for the size and power of the car its got good fuel economy.

We arent going to say its the best car, as its not. But I mean if we were in the market for a 4 door new sedan we would have to look at it. But we arent, which is why we all drive high performace turbo Japanese imports... We arent the target market.

  • Replies 93
  • Created
  • Last Reply

Top Posters In This Topic

I think it will be interesting to see in the flesh.

I've seen some angles where I think, yea.. that looks tough, then others where I think its as ugly as sin.

There's no doubt the LS2 motor is an awesome motor.

Time will tell if holden have a well built 'quality' car.

As i've mentioned i'm impressed with the car, I think holden have come a long way an the new VE was a big step in the right direction. Think about how far behind in technology a VN como was in comparison to a R32, or a VP compared to a R33....they were miles behind. Finally there coming up to scratch with the rest of the world, an good on em. I dont particularly want one, when I need a family car, i'll look into one.

I dont see why people still try to put down pushrod engines, they obviously have prooved the tests of time, hell even Nascar use Pushrod engines and they put out 770hp (575kw) and thats Naturally Aspirated. Plus the pushrod engine is lighter than a twin cam.

I don't see why people assume things without reading posts properly.

If you'd understood my point (by reading my entire post in context), you'd see that IMO a 6.0L V8 is the wrong engine at the wrong time for Holden. I don't care how much torque it makes at 0.0005rpm. So too if the V6 is even remotely unreliable or not as economical as other cars in it's class, and fuel prices continue to rise, then Holden has big problems with the VE.

Why isn't the Nissan Fuga or Toyota Mark X offered for sale in Australia?

I can't believe that in this day and age they are still offering air conditioning as an extra on the base model.

Whats up with that?

12,000 korean cars come standard with air con but a 34 grand new holden doesn't.

No idea about the Nissan, but the Toyota they thought the avalon was a better car for the aussie market. So Holden aint that bad...

Anyway, pricing seems pretty good.

Yeah, that and the 'No imported RWD cars to compete in Falcodores price bracket' rule of 1978 :cheers: lol

the sooner GM and Ford declare bankrupcy the better the motoring world will be.

they are dinosaurs and they will die like them. Natural selection will kill holden and ford.

think about it, fuel economy is driving car sales......people dont want big cars as much as they use too........the big aussie family who have 3 kids, are fat and like to tow things dont buy commodores or falcons like they use too, they buy Landcruisers or Patrols. 4WD's are the new family car. no one else wants to drive one. it's a waste of fuel and space for a commuter who would normally aim for something like a Corolla etc.

while Japan is pumping huge money into developing hybrids and efficiancy, Europe is developing groundbreaking disel tech, like BMW's performance disels, this tech will eventually flow down the price range. Peurgot is developing a disel/hybrid which runs a desil and electric motor. relly innovative and exciting stuff........

What the hell does Holden bring out? hmmm....a bigger V8, another RWD 6cyc 4spd. same shite different wrapping no more reliable than the last thing they brought out. another thing that no one wants. Holden is denying the reality of the world we live in and for that it will fail. The VE is another step down this road. an LPG version is a fantastic idea.

Edited by The_Paladin

^^GM and ford have produced some quality vehicles in their time though ie- Corvette, Ford GT40 etc And all the classics before them so come on be reasonable. The funny thing about this thread bashing the fuel guzzlers etc etc is that you all drive performance based cars, which use equal amounts of fuel and gets similar km's to that of the 6.0Litre Holdens. Throwing stones in glass houses.

when was the last time you saw a GT40 drive down the street or stitting in a dealership? or even a corvette for that matter?

I'd say a big difference between a GTR and a 6.0L Commo is that the GTR dosent have illusions about being a family car. It knows what it is, it is a purpose built vehicle and it does it's purpose. what's the idea of a V8 Berlina? to hurl the wife and kids around the track at top speed and comfort? Family sedan 'sports' cars are a BS idea, they are hugely overpowered.

i would have thought that a GTR would have better economy anyway.

Edited by The_Paladin
^^GM and ford have produced some quality vehicles in their time though ie- Corvette, Ford GT40 etc And all the classics before them so come on be reasonable. The funny thing about this thread bashing the fuel guzzlers etc etc is that you all drive performance based cars, which use equal amounts of fuel and gets similar km's to that of the 6.0Litre Holdens. Throwing stones in glass houses.

hardly... I return 10.5-11L per 100km's. :devil:

Pretty damn good from an RB30DET.

Stick the boot in yes it will suck quite a bit of fuel. The point is I can cruise around and return excellent fuel economy.

My previous VS v8 5speed would suck the juice no matter what.

It would average around 15l/100km's, BIG difference from the little R32.

I had a clubsport, 5.7l 285kw version, i got a 10l/100km on a trip to brissy and back, now you can't say that ain't good fuel economy. i get roughly the same in my r33 but i don't have the room or the power of the clubsport, and i'd be f**ked if i'd trust my r33 to tow a boat as easy as a falcon or a commodore. horses for courses, i'm married and have kids, and we travel for our holidays, but try and do that in a skyline comfortably, don't think so. A skyline is a performance car yes we know that and the commodore is a family car, but what about the people (including me) who want both?? As for the family car being a landcruiser and what not, they drink a hell of alot more then any commodore or falcon, not to mention costs to service and maintain them and even the initial outlay is more.

As for the euros going towards diesel yes its a good idea, but they also get a tax benefit for having a diesel powered car. Ford and Holden do need to catch up to the rest of the world in car technology but they have started and they will get there. Don't forget cars coming out of the manufacturers today have been designed four to six years ago.

The commodore of today is one of the best designed and built car in Australia, yeah we know its not the best in the world but atleast ford and holden are improving with every model they come out with in quality and design.

Thing is, how much is a BMW desiel car over here compaired to EU... I think a lot of you really dont get this hey.

BTW, ford aint too bad. They have their EU division which are pumping out some nice cars. Also think if ford and GM go down, who goes down with them. 100 000s of jobs, potentially whole economys, volvo, subaru, mazda, proton/lotus to name a few. For anyone to say 'I wish they would go broke' is very narrow minded. They build cars for a price, just like hyundia etc do.

I've been though this a thousand times GTR's are NOT purpose built.

They are based of a 4 door family car platform.

The new GTR will be the first and only purpose built GTR. Having it's own unique 2 door chassis, and powertrain.

Skylines are performance cars in the same vain as a SS is a performance car. They are both based of high volume selling family cars that have been modded to make them more sporty.

If you want a true pure nissan sports car in australia you are limited to a 200SX (Silvia) or a 350Z.

I've been though this a thousand times GTR's are NOT purpose built.

They are based of a 4 door family car platform.

The new GTR will be the first and only purpose built GTR. Having it's own unique 2 door chassis, and powertrain.

Skylines are performance cars in the same vain as a SS is a performance car. They are both based of high volume selling family cars that have been modded to make them more sporty.

If you want a true pure nissan sports car in australia you are limited to a 200SX (Silvia) or a 350Z.

Exactly! Awesome post!

Get over it people. Hating on other cars is pathetic, it makes you all look small and threatened.

Realise the good in both and chill.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 65601-05U00 is the hood latch. 62550-08U31 is the support that holds it to the radiator core support. They are all super discontinued so I don't really have any great leads on how to source this stuff.
    • GTSBoy on your suggestion on another thread I had a look at those injectors and ended up getting them because of the quality.  Got the expensive ones.  
    • Hey guys been looking everywhere to try and find the correct gtr hood latch support part number but only found the first half and when I search with that number it sends me to an r34. The first part I found was 62515. If anyone could help me with the rest then I’d really appreciate it. Or if there’s some alternative hood latch support that would work even better cause I can’t find any for sale. (Searched on upgarage, partsouq,buyee,rhdjapan) 
    • If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
×
×
  • Create New...