Jump to content
SAU Community

Recommended Posts

Hi All,

I am trying to make a comprehensive list of import cars and the years in which the different models were produced. So if you could please peruse over the information I have collected and advise me of any mistakes/inaccuracies that would be great. The purpose of making this list is so that I can classify performance parts under one of the corresponding descriptions.

The format is:

Common name (Chassis Code) Year Start/Month Start - Year End/Month End

180SX (PS13/KRS13) 89/4 - 91/1

180SX (RPS13/KRPS13) 91/1 - 93/12

180SX (RPS13/KRPS13) 94/1 - 96/7

180SX (RPS13/KRPS13) 96/8 - 99/1

180SX (All Series) 89/4 - 99/1

Silvia (PS13/KPS13) 91/1 - 93/10

200SX (S14/CS14) 93/10 - 99/1

200SX (S15) 99/1 - 02/8

R32 GTS (HR32) 89/5 - 94/11

R32 GTS-t (HCR32/HNR32) 89/5 - 93/8

R32 GTR (BNR32) 89/8 - 95/1

R33 GTS (HR33) 93/8 - 97/11

R33 GTS-25t (ECR33) 93/8 - 98/5

R33 GTR (BCNR33) 95/1 - 99/1

R34 GTS (ENR34) 98/5 - ?/?

R34 GTT (ER34) 98/5 - 01/6

R34 GTR (BNR34) 99/1 - 02/8

300ZX (Z31) 84/1 - 89/12

300ZX (Z32) 89/7 - 00/8

350Z (Z33) 02/08 - ?/?

Gti-R (RNN14) 92/1 - 95/12

Link to comment
https://www.sau.com.au/forums/topic/126323-nissan-import-production-years/
Share on other sites

I'm just going on what I found from catalogues and the internet, if you could provide a month and year that would be awesome. I will look into all responses though.

thanks again

R32 GTS (HR32) 89/5 - 94/11

The r32 gts/gtst was only built up to and including 1993, the only r32 built in 1994 was the gtr... at least thats what i thought, probably wrong. Also i've never heard of a 1995 r32 gtr, is there such a thing?? surely any would be worth a bit if nissan stopped production in January 1995 (assuming the above information is correct)

Edited by r32line

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...