Jump to content
SAU Community

Moderator Question ?

MountainRunner

By MountainRunner,
in Queensland

 Share

Recommended Posts

MountainRunner Mentor

MountainRunner

Posted
Posted

Hi,

I have finally got the operating manual for the GTR 4WD Controller I am building almost finished. A few guys have been interested in the controller as it has been seen at my track days being tested. The White R32 GTR, number plate 'cut' was testing it (came 2nd on May 2) as well as the die hard blue GTR.

Can I post the manual here and a brief description so you guys can see what I'm building, or is that against the forum rules. I'd prefer to keep it to the Qld section at this stage as I know you guys. I don't want to cause any problems so I thought I would ask first ?

Thanks

Paul

Link to comment
https://www.sau.com.au/forums/topic/126488-moderator-question/
Share on other sites
Mud Grand Master

Mud

Posted
Posted
  MountainRunner said:
Hi,

I have finally got the operating manual for the GTR 4WD Controller I am building almost finished. A few guys have been interested in the controller as it has been seen at my track days being tested. The White R32 GTR, number plate 'cut' was testing it (came 2nd on May 2) as well as the die hard blue GTR.

Can I post the manual here and a brief description so you guys can see what I'm building, or is that against the forum rules. I'd prefer to keep it to the Qld section at this stage as I know you guys. I don't want to cause any problems so I thought I would ask first ?

Thanks

Paul

Paul

Let me get this clear,

Its your 4wd controller that you built?

and you have written the manul for it?

then you hold the copyright to it and you can do whatever you like with it!

thanks for making QLD no. 1

nice work

hrd-hr30 Grand Master

hrd-hr30

Posted
Posted
  MountainRunner said:
I have finally got the operating manual for the GTR 4WD Controller I am building almost finished. A few guys have been interested in the controller as it has been seen at my track days being tested. The White R32 GTR, number plate 'cut' was testing it (came 2nd on May 2) ...

is that Rejon?

anyway, I'd be interested to see/hear more about this controller too.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Blue slip

      By Duncan · Posted

      You just need a different blue slip shop (preferably one you regularly use as a mechanic), and make sure the coil overs are as close as possible to standard height
    • Duncan
      Ethanol Content Sensor - Always at 11%?

      By Duncan · Posted

      yeah the sugar refining companies were pushing for the same in Oz originally, all fuels were going to have 10% ethanol to make them "cheaper" (noting, that the loss in l/100 might be greater than the decrease in price). I guess they won that fight in Canadia
    • thatjawncrazy
      Another "where do these lines and plugs go" RB25DET question

      By thatjawncrazy · Posted

      GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Stringycheese
      Blue slip

      By Stringycheese · Posted

      Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
×
×
  • Create New...