Jump to content
SAU Community

Removal Of Oil Catch Can

Beef

By Beef,
in General Maintenance

 Share

Recommended Posts

Beef Community Regular

Beef

Posted
Posted (edited)

Hey lads, i decided that i really dont need my oil catch can, obviously because im not running enough boost to warrant having one and also there is a lot of oil misting coming from it, and its making a right mess...

do i simply just link the hose back into the top of the engine?

or could anyone show me pics of what should happen with that extra piece of pipe that goes from the crank case thing to the catch tank?

Beef

Edited by Beef
Link to comment
https://www.sau.com.au/forums/topic/126860-removal-of-oil-catch-can/
Share on other sites
Craved Grand Master

Craved

Posted
Posted

so you want that oil mist that is making a "right mess" to go back into the engine?

if you are getting oil mist, then you NEED a catch can, as that is what it is for... removing the oil from the air/pressure in the cam covers/head.

Beef Community Regular

Beef

Posted
  • Author
Posted
so you want that oil mist that is making a "right mess" to go back into the engine?

if you are getting oil mist, then you NEED a catch can, as that is what it is for... removing the oil from the air/pressure in the cam covers/head.

yeah, maybe your right...

but my car makes 242kw atw... do i really need one?

what is teh actual purpose of an Oil Catch Can?

it was on there when i bought it..

Beef

Craved Grand Master

Craved

Posted
Posted
s as that is what it is for... removing the oil from the air/pressure in the cam covers/head.

this air goes back into the turbo air feed between the turbo and the AFM

without a catch can. that oil that the catch can is collecting goes into your air feed. then into combustion chamber which can actually be a contributing factor to pinging

you dont get to a power level then need one.... if you catch can has got oil in it, then your motor has blowby and will need it.... and you should get a comp test done to check its health as excessive blow by is bad!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      So we have most the interior back in, and for the first time with one OEM speaker hooked up. The 31 is running, driving and now tunes!!! Hahaha yet another step for the sub that sat 10m under for two weeks!!! unbelievable really 👌 lots of love work and not giving up on her. Seen so many youngsters part way less, and in way better condition. I’m stubborn, thinking another problem is just a hurdle to overcome, One at a time. IMG_9277.mov
    • TurboTapin
      CD009 RB Conversion

      By TurboTapin · Posted

      That is correct. I'm using a modified ABS ring and a ZF speed sensor on my rear diff for speed input. I'm running a Haltech ecu. 
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Been busy with the newborn. We originally thought we were going to go for a third, but we're good with two lol. He's starting to actually sleep now so I've had some energy to work on the car. It's been parked away in the garage since late November due to winter.  I went ahead and redid all my head oil drains. I originally had my front and rear head drain going into the same pipe but have since split them up. I also added an Ethanol content sensor to get ready to run E85 this summer. Tossed it on my return line. Sensor sits nicely under my intake manifold.    I also have a lot of parts that came in for my rear end. I'll be swapping over to a 3.3 final drive and doing the GK teck anti squat mod. While the rear subframe is off, I'll also change every bushing. We're planning on buying another house soon with the condition that I get at a minimum a 2 door garage, so I'll wait to have more room for this. Now onto the strange things that recently happened... After changing the lower rad hose (It had been sitting in my cabinet for well over a year and was the last hose I had to replace), I let the car idle in the garage to bleed my coolant. After running for a few minutes, it started missing. Got much worst within a minute or two and then stalled and would not restart. My crank sensor decided to crap itself. No damage, no explanation, just died. I went ahead and replaced it with another ZF sensor but the heavier duty stainless model with a shield. Tossed that in and started right up. Has anyone else seen this? I hate when things fail without cause. Luckily this was a blessing in disguise... This lead me to recheck my timing. It seems I may have had a beer or two the last time I had set my TDC angle as I was off exactly 5 degrees... I miscounted a line haha. I was running 5 degrees less then commanded. It's a little embarrassing but helps explain why my dyno operator seemed to think I should be making more then 478rwkws.        
    • hypergear
      Hypergear Turbochargers and High flow Services Development thread

      By hypergear · Posted

      Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
×
×
  • Create New...