Jump to content
SAU Community

Recommended Posts

hey ppl this is what im trying to say i need to find the head light fuse so i can use the head light switch to light my boost gauge but i can find it. Ive tried every fuse under the dash with a test light turning off and on the lights to find something I can use but nothing works.

if u go straight to the power for the lights it will be on all the time, your lights are on without the ignition on right? thats why it beeps when you leave them on. you need to splice into the power AFTER the parking lights switch, so it turns on when the parkers are on. u can do this near the ignition keyhole there is a white plug it is a red and blue/silver wire near there, however i installed mine into the console so got power from the illumination of my head deck, which i assume comes from the ciggarette lighter (its a mess in there, dodgy jap installers)

John,

If you remove your A/C behind there you will find wires labeled ACC, power and lights. They are red ,yellow and orange but cant remember which is which now but they are labeled

You can use the one labeled lights as its the same circuit that dims your displays in the centre console when you turn your head lights on and this will work for you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As a general rule removing rubber fuel hose is so difficult I would replace it if it hasn't been done in the last 5 years. The risk you damage the liner or one of the inner layers is pretty high if it's not almost brand new. BMW's recommendations around coolant hoses is similar. My R33's fuel hoses at the fuel tank were so perished that they were ready to burst FYI. 
    • Ah yep, will do. Cheers!
    • Yes. It's either "2 wires", or 1 wire, depending on how you look at it. It is the connection that ties the battery -ve to both the chassis and the engine. Every electron that goes in or out of the battery goes through those 2 small spots (on the inner guard and on the engine block). If those are not clean and tight, then shit starts to suffer. Yeah, but measure it again cold in the morning, after it has had hours to rest. You can't usefully test the charge state of a battery immediately after it has been running because the alternator puts a surface charge onto the plates that takes a while to soak in and balance out. It will always read higher, and potentially look properly healthy, when fresh off of charge. But hours later it can look a lot less healthy. It's also worth measuring the battery voltage while cranking, although this can be difficult with a typical DMM because the screem update rate is so slow on most of them. An analogue voltmeter is actually a better tool for that. If the voltage drops too far while cranking, it is a sign of a poor battery. Although I don't think we're necessarily looking for a weak battery here - just wanting to exclude it.
    • https://www.facebook.com/share/15ZMn5oXtc/ Updated Event (so its not private and can be shared easier)  Attempting to coordinate a big push of Stagea's to this years GTR Festival. Great event last year and hoping for the same this year.  Discounted tickets 20% off for their various tickets until the 3rd of Feb Monday. Drags, show and shine etc.  I've emailed them to ask to set a location aside for the Stageas for the show and shine - they are happy to do so if we can get them numbers, I'm happy to keep track of that. Entering as Nismo category.  I'll be road tripping up from Melbourne, would be cool to convey if people are interested, maybe there is SAU convoys from each capital? If you have ideas about that let me know.  https://gtrfestival.com.au  
    • Does have series 2 airbag steering wheel and passenger side airbag also.
×
×
  • Create New...