Jump to content
SAU Community

Recommended Posts

Well this a very simple and easy, but it thought why not post up a DIY on it just in case you've never done it before.

Ok here's the wiper blades i use....

wp87ln.jpg

And yes they come in different colors......

http://www.aunger.com.au/hidden/item_3ff8a...4123127014.html

http://www.aunger.com.au/hidden/item_3ff8a...c808842619.html

http://www.aunger.com.au/hidden/item_3ff8a...e095973787.html

http://www.aunger.com.au/hidden/item_3ff8a...d845084175.html

http://www.aunger.com.au/hidden/item_3ff8a...2127621934.html

Step 1

Remove the old blades by pushing these metal 'clips' and pull the old blades down and off.

wp76qi.jpg

Step 2

Now slide the new blades on....using the gooves in the new blades to run through all the clips of the wiper

wp57ol.jpg

Step 3

OK with the new blades on, you'll now have alot of over hanging blades....

wp41wd.jpg

Out come the pliers or old scissors (not the good scissors!!!!!! :) )

wp32vs.jpg

And cut away.....

wp28ka.jpg

Job Done 8)

wp17zh.jpg

Now off to the dyno for the re-tune.

(this was done on my WRX :) )

Also just a quick tip, for having a really clean outside window, use a little Meguiars clay bar on the windscreen, it cleans it up awesome!!

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/127177-changing-your-wiper-blades/
Share on other sites

they come in either 6mm or 8mm. buy the correct one. the aunger ones are both 6 and 8mm, so they should fit anything.

Be careful using those plastic cut it yourself ones. they might slip off. if that happens, your window will get scratched.

Best stick with the metal insert ones.

I would suggest staying away from the wipers you get from Big W etc etc

Get the blades with the metal inserts, they are much quieter and wipe much more better.

I have wasted my time on crappy wipers which have annoyed the hell out of me. Spent $23 on genuine Nissan wipers and will never look back.

Quiet, smooth and wipes everything off in one swipe. hahah

As I said above, quieter and better wiping isn't the main problem. If the non metal one slips out, the arm will scratch the window.

I have this nasty scratch on my daily driver's windscreen. Mum must have driven with a broken blade for like 5 years or something.

BTW, You don' ahve to spend 23$ ffor genuine nissan ones. Nissan don't make wiper blades. Bosch - avaialble at supercheap auto make metal insert ones. Just get the right length ones.

  • 3 months later...
  • 1 year later...

So, as the links don't work.

Please show me lead me to where to get some new blades.

I've got 3 10+ year old cars that have never had them changed. I can't see in the rain.

Let me know and recommend.

Also, will i just be able to buy the same ones and fit on all the cars?

Edited by Owgasm
Anybody help me lol. I don't care about stickers lol.

Most auto stores stock them. Super Cheap have the Aunger and Bosch refills, both of which i have tried and recommend.

Make sure you measure the longest wiper so that you get the right sized refills,

and choose the brand that comes with a free sticker............. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yucky. Things haven't gotten any better though. Now you have Emerson and Honeywell pushing these massive DCS/Scada things with proprietary hardware. They're not a PLC, they're not a computer, they're a...distibuted PLCish/DCSish monster of thing, that only they can program because they make the barriers to entry for anyone else so fricking high. And their developers are all located in the third/developing world (and India, in case anyone does not include that place in that category) and there are terrible failings of the ESl variety, of the care and common sense variety, and f**king forget about Functional Safety. Not a one of them has any idea what it means to comply with an IEC 615xx series standard.
    • All of the ECU grounds are to the chassis, the IGN grounds are to the cylinder head and i believe all the OEM body harness are left in original locations, im trying to work out if i can tell if the sensor voltage itself is losing any power to it from the very low ECU voltage. But yeah a manual pressure gauge will help in picking which path to actually chase. Also please dont bully my wiring plan i never designed it to be universally understood hopefully it still can make sense to you, im a wiring virgin.  1 thing i have just noticed the pressure sensor in question relays both pressure and temperature, the temperature reading holds nice and steady despite the low ecu voltage but the pressure reading is the one that jumps around alot so maybe it is really a pressure issue? wiring plan.xlsx
    • Gday, Due to not finding much up to date info on this topic I thought I'd make a thread to get peoples latest opinions/recommendations. Background info -  I've got a S1.5 R33 GTST as a fun project car, mainly for street use and occasional drag strip, apart from all the cosmetic things I'll be doing a full rebuild of the engine with forged internals. Since it'll be getting new cams (kelford) and springs to match I thought I might as well get new lifters and valves while I'm at it, the dash says 160k KMs but the engine seems pretty tired, compression measures about 130psi across all cylinders so I'd like to freshen everything up. This is where I'm tempted to just fork out the extra and go solid lifters while it's all apart, aiming for 400-450kw atw with a flex tune. Assuming all supporting mods (oiling, fuel and all bolt ons) with a lightly ported head and turbo to match (yet to make a decision possibly gtx3582r or similar from Hypergear) I've seen the Tomei kits with just the buckets getting around, Supertech sells most things - Supertech High Performance Cam Followers | Trusted Racing Cam Followers Questions -  Has anyone found the Hydraulic lifters to limit them at this power level? Is it usually found that you can just clean the stock lifters and find they work fine?  Does going solid lifters save any headaches/issues with hydraulic lifters in the future? Any recommendations on other things that will need to be replaced, I know I'll need to get the solid profile cams but can you use the same type of valves and springs/retainers and is it recommended to change the guides and stem seals?    Summary -  Basically looking for pros/cons and wanna know if I'll actually need the extra RPMs from solid lifters or it'll just be bragging rights to say it ReVs OvEr 8000 Cheers
    • Ha ha ha, this stuff they had was installing Toshiba PLCs that were made some time in the 1990s, and they were replacing GEM80 PLCs. To let those two talk (staged upgrade along a ~1.2km long building that was split into 4 sections), was a bunch of WinXP machines running Java gateways... There was no way to put something like ProfiSafe in... Most of the HMI machines were WinXP, with Java program, with a custom button board emulating a keyboard... About the only buttons in the operator stations that went direct to the PLCs was the eStop. There was some interesting design stuff in that place...
×
×
  • Create New...